Police

Dismantling of Brick Masonry clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , Overheads & Contractor profit etc., complete for Brick Masonry

Dismantling of doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including Chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and Overheads & Contractors profit complete for finished item of work(BLD-CSTN-14-11)

Removing of existing Split Air Conditioners without damaging to copper pipe. ELEC-5.9.31

Removing of Existing damaged gyp board with channels and disconnecting the light connections in rooms of DGP camp office including transportation of waist debris to then out side the municipal limits and all labour charges etc., complete. Rate approved Providing New false ceiling to DGP Camp office at Vijayawada of NTR District

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK GROUND FLOOR (APSS NO. 501&504).

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN CM (1:6) PROP. INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS - GROUND FLOOR (APSS NO: 901&904)

Glass Type : 12mm thick touhened tempered float glass, clear finish, conforming to IS 2553:2018. All edges machine poished and chamfere for safety. Partation Dimensions: Full height glass partation as per site requirement. Glass fixed using D- type stainless steel studs SS 304 grde to floor wall, and ceiling. Door Specifications: Size 900mm W x full partition height H. Type: Frameless hinged glass door with soft - closing floor spring. Floor spring: Heavy-duty double-action soft closer, SS 304grade cover plate dorma/Ozone/rquivalent. Hardwre & Fitings: SS patch fittings, top/bottom pivots, lock if required, and 600mm D-handle - all in SS 304 grade. All fittings to be of Dorma, Hafele, Ozone, or equivalent approved brand. Sealant and Joints: All glass -to-glass and glass-to wall joints to be sealed with clear, neutral cure silicon sealant Down Corning GE or equivalent. Rate approved RENOVATION OF LOUNGE AREA, RENOVATION OF SUIT ROOMS NEAR LOUNGE (5NOS) , RENOVATION OF SUIT ROOMS REAR SIDE (4 ROOMS) OF DGP CAMP OFFICE AT GOVERNOR PET VIJAYAWADA CITY OF NTR DIST

PROVIDING FROSTED CHARGES TO THE GLASS WITH ALL LOABUR CHARGES Rate approved RENOVATION OF LOUNGE AREA, RENOVATION OF SUIT ROOMS NEAR LOUNGE (5NOS) , RENOVATION OF SUIT ROOMS REAR SIDE (4 ROOMS) OF DGP CAMP OFFICE AT GOVERNOR PET VIJAYAWADA CITY OF NTR DIST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in non-Residential Buildings. Wires Make:Finolex/RR Kable/Havells Switches & Cover Frame Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and Fixing of 25mm outer dia (2.20 mm thickness) heavy grade with IS:9537 part 3 FRLS regid surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Make: SUDHAKAR / VIP/ GM

Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and fixing of 6/10A 3/2 pin modular plug socket - 2Nos with 6/10A one way modular switch -2Nos control on a common switch board covered with 6 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and Fixing of 16/20A 2 Modular 1 way Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 4 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova

Supply and run of 3 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Finolex/RR Kabels/Havells

Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Finolex/RR Kabels/Havells

Supply and run of 3 of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Make: Finolex/RR Kabels/Havells

Supply and Transportation of 36W Recessed / Surface slim LED panel of 600mm x 600mm made of alluminium body with acrylic diffuser, Constant current out put of Driver operating voltage range of 150 to 265 Volts AC, Power factor > 0.9 high power LEDs having efficacy of > 120 lumins/watt, junction temparature less than 85 degrees centigrade and THD is less than 12% etc complete. MAKE : Phillips / GE / Crompton / VIN / Bajaj / Havells.

Supply and Fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.50 mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20 x 27 x 30 mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 x 15 x 15 x 0.90 mm) from soffit at 1220 mm c/c with ceiling angle (25 x 10 x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.50 x 26 x 10.50 x 0.55 mm) fixed in diection perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm drywall scews at 230 mm c/c & jointing, fixing using joint compound and paper tape to have a flush look including filling the tappered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd., Specification. Rate approved Conversion of rooms 6,7,8,9 (4 nos) to suit rooms in First Floor of DGP camp office at Governor pet vijayawada city of NTR District.

FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK Rate approved Conversion of rooms 6,7,8,9 (4 nos) to suit rooms in First Floor of DGP camp office at Governor pet vijayawada city of NTR District.

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK - INTERNAL WALLS.

PAINTING TO OLD WALLS WITH 2 COATS OF ROYAL LUXURY INTERIOR EMULSION PAINT OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWERED MATERIAL INCLUDING COST AND CONVEYANCE ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL INCIDENTAL LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS Rate approved Repairs to DGP Resideance at Governor pet vijayawada city of NTR District.

Supply of1.8/1.9/2.0TR, 3 Star capable of delivering not less than 21600 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: As per list of recommended brands as category I. INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation ELEC-5.5.1 A

Ballroom wall paneling ::SUPPLY AND INSTALL READY-MADE CHARCOAL WOODEN LOUVER PANELS OF SIZE 2’-0” WIDTH X 8’-0.HEIGHT AND FIXED ON SUPPLY AND FIXING OF 6MM THICK PLY WOOD SHEETS OVER ALUMINIUM CHANAL FIXED ON DRY WALL WALL USING PU ADHESIVE.ENSURE THE WALL SURFACE IS CLEAN, LEVEL, AND FREE OF DUST BEFORE INSTALLATION.PROVIDE MATCHING COLOURED SCARF TRIMS (20-30MM) ON ALL EXPOSED PANEL EDGES.PANELS MUST BE INSTALLED IN PERFECT ALIGNMENT BOTH VERTICALLY AND HORIZONTALLY.ALL JOINTS SHOULD BE TIGHT, FLUSH, AND WITHOUT VISIBLE GAPS OR FIXINGS.THE FINISHED SURFACE SHOULD BE CLEAN, SCRATCH-FREE, AND UNIFORM IN APPEARANCE.ALL MATERIALS AND WORKMANSHIP TO CONFORM TO APPROVED QUALITY STANDARDS Rate approved RENOVATION OF LOUNGE AREA, RENOVATION OF SUIT ROOMS NEAR LOUNGE (5NOS) , RENOVATION OF SUIT ROOMS REAR SIDE (4 ROOMS) OF DGP CAMP OFFICE AT GOVERNOR PET VIJAYAWADA CITY OF NTR DIST

VRCC DESIGN MIX M 20 GRADE CONCRETE CORRESPONDING TO IS 456 AS PER APPROVED MIX DESIGN USING WEIGH BATCHER / MIXER WITH 20MM SIZE GRADED MACHINE CRUSHED HARD GRANITE METAL FROM APPROVED QUARRY INCLUDING COST AND CONVEYANCE OF ALL MATERIALS L, WATER ETC., TO SITE AND INCLUDING SEIGNIORAGE CHARGES, SALES & OTHER TAXES ON ALL MATERIALS INCLUDING ALL OPERATIONAL, INCIDENTAL AND LABOUR CHARGES SUCH AS WEIGH BATCHING, MACHINE MIXING, LIFTING ( MANNUAL), LAYING CONCRETE, VIBRATING, CURING AND PROVIDING CENTERING USING STEEL SCAFFOLDING PIPES, JACK PROPS, STEEL CENTERING PLATES ETC., FOR UNSUPPORTED HIEGHT OF 3.66 M ETC.,COMPLETE WITH MINIMUM CEMENT CONTENT OF 380 KGS AS PER IS CODE ETC. COMPLETE BUT EXCLUDING COST OF STEEL AND ITS FABRICATION CHARGES FOR FINISHED ITEM OF WORK (APSS NO. 402) FOR GROUND FLOOR LINTELS

Supply of 3.5 TR 4-star Three Phase capable of delivering 42000 BTU / hr and above with operating on refrigerant R-32 / R-410A. Makes: As per list of recommended brands as category I. inverter Cassette type AC unit with ceiling mounted indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc. complete with Wireless remote controller, without refrigerant piping and cable.MAT-03762

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in non-Residential Buildings. Wires Make:Finolex/RR Kable/Havells Switches & Cover Frame Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and Fixing of 25mm outer dia (2.20 mm thickness) heavy grade with IS:9537 part 3 FRLS regid surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Make: SUDHAKAR / VIP/ GM

Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and fixing of 6/10A 3/2 pin modular plug socket - 2Nos with 6/10A one way modular switch -2Nos control on a common switch board covered with 6 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova.

Supply and Fixing of 16/20A 2 Modular 1 way Socket with shutter and 16A / 20A 1 Way Modular Switch duly recessed in wall with 4 Modular Box and 3 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand Arteor/Carbtree Murano/GM-Zenova

Supply and run of 3 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Finolex/RR Kabels/Havells

Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Finolex/RR Kabels/Havells

Supply and run of 3 of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Make: Finolex/RR Kabels/Havells

Supply and Transportation of 36W Recessed / Surface slim LED panel of 600mm x 600mm made of alluminium body with acrylic diffuser, Constant current out put of Driver operating voltage range of 150 to 265 Volts AC, Power factor > 0.9 high power LEDs having efficacy of > 120 lumins/watt, junction temparature less than 85 degrees centigrade and THD is less than 12% etc complete. MAKE : Phillips / GE / Crompton / VIN / Bajaj / Havells.

PAINTING TO OLD WALLS WITH 2 COATS OF ROYAL LUXURY INTERIOR EMULSION PAINT OF APPROVED BRAND AND SHADE AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWERED MATERIAL INCLUDING COST AND CONVEYANCE ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL INCIDENTAL LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS

DGP OFFICE CHAMBER:SUPPLY AND INSTALL READY-MADE CHARCOAL WOODEN LOUVER PANELS OF SIZE 2’-0” WIDTH X 8’-0.HEIGHT AND FIXED ON SUPPLY AND FIXING OF 6MM THICK PLY WOOD SHEETS OVER ALUMINIUM CHANAL FIXED ON DRY WALL WALL USING PU ADHESIVE.ENSURE THE WALL SURFACE IS CLEAN, LEVEL, AND FREE OF DUST BEFORE INSTALLATION.PROVIDE MATCHING COLOURED SCARF TRIMS (20-30MM) ON ALL EXPOSED PANEL EDGES.PANELS MUST BE INSTALLED IN PERFECT ALIGNMENT BOTH VERTICALLY AND HORIZONTALLY.ALL JOINTS SHOULD BE TIGHT, FLUSH, AND WITHOUT VISIBLE GAPS OR FIXINGS.THE FINISHED SURFACE SHOULD BE CLEAN, SCRATCH-FREE, AND UNIFORM IN APPEARANCE.ALL MATERIALS AND WORKMANSHIP TO CONFORM TO APPROVED QUALITY STANDARDS

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 10LIT capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on outlet side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: As per list of recommended brands. (LQR).

MATERIAL: 19 MM THICK PLYWOOD WITH BOTH SIDES LAMINATED FINISH AS PER APPROVED DESIGN AND COLOUR. • SIZE: • LENGTH: 5 FT (1500 MM) • DEPTH: 12 INCHES (3000 MM) • HEIGHT: 1 FT (300 MM) • EDGE FINISHING: ALL EXPOSED EDGES TO BE FINISHED WITH 1 MM THICK LAMINATE. • INTERNAL FINISH: INTERNAL SURFACES FINISHED WITH BALANCING LAMINATE OR CLEAR POLISH IF REQUIRED. • JOINERY: BOX TO BE ASSEMBLED WITH WOOD SCREWS AND ADHESIVE; JOINTS CONCEALED WITH MATCHING LAMINATE • LOAD CAPACITY: ADEQUATELY BRACED INTERNALLY TO SUPPORT REGULAR LOAD AS PER USAGE. • ACCESSORIES (OPTIONAL): SOFT-CLOSE HINGES/TELESCOPIC SOFT DRAWER CHANNEL OF SIZE 300 LENGTH LID STAY IF OPENABLE, OR FIXED TOP AS PER DESIGN REQUIREMEN.

Providing and fixing factory made uPVC white colour casement/casementcum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.MAT-05444

Supply and fixing of PVC false ceiling on MS/GI made skeleton framework. The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work. BMT-M.87

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 15.90 MM OD PIPES SDR 13.5

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5

SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2" TO 2") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5

Supply, Installation and commissioning approved make wall mounted EWC suit model No: ACS-WHT-87953BIUFSM CASCADE ( Jaquar) model 'P' or 'S' trap with dual flush porcelain cistern concealed in wall with all internal parts with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap all of approved make etc.complete for finished item of work in all respects.

SUPPLYING AND FIXING JAQUAR MAKE (25909)FLAT BACK WHITE GLAZED WASH HAND BASIN IST QUALITY OF SIZE 495 X 395x150 MM SINGLE PILLAR COCK(15021PM-OPP-CHR) AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD OF JAQUAR MAKE OVER GRANITE PLAT FORM OF APPROVED COLOUE AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty

Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty: Chrome plated

Supply and fixing wall mixer with provision for over head shower and 115 mm long bend pipe with wall flange Jaquar make queen series with 7 years warranty: Chrome plated

Supply & fixing overhead shower rose with revolving joint and 150 mm long swivel shower arm Jaquar make queen series. with 7 years warranty: Chrome plated

Supply & fixing soap dish Jaquar make queen series: with 7 years warranty: Chrome plated

Supply of fresh air exhaust fan of light duty 250V A.C.50Hz../ 300mm size (12") 1350 R.P.M Metallic body plastic blades, wire mesh, etc., complete. complete.Make Crompton/Orient.

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.

TOILET DOOR: 0.85X2.10 M: SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 100 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 250 MM LONG, 2 NOS. of 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002)