Supply of materials for Pothoor anganwadi

Amount

MATERIALS

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Stone Aggregate(single size): 10 mm nominal size

Second class kail wood in planks

Second class kail wood in scantling

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Solid blocks of size 30x20x20cm

Adjustable span ESO+SI (2.35-3.40)

Solid blocks of size 30x20x15cm

Flats up to 10 mm in thickness

Hollock wood in planks

Kiln seasoning of timber

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Mild Steel round bar above 12 mm dia

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Oxidised mild steel tower bolt (barrel type) 250x10mm

Oxidised mild steel screws 30 mm

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Anjili wood scantls

Twisted steel/deformed bars

Fine sand (zone IV)

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Synthetic enamel paint in black or chocolate shade

Black Japan

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

plastic emulsion paint

15 mm PTMT bib cock

PVC pipe 32 mm outer dia. 10Kgf/cm2

C P brass angle valve 15 mm

PVC pipe 50 mm outer dia.6kgf/cm2

stone aggregate 06mm

PVC pipe 110 mm outer dia 6kgf/cm2

Polyethylene water storage tank with cover and suitable locking arrangemnet

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC bend 63 mm dia

PVC bend 110 mm dia

PVC Tee 110x110x110mm dia

PVC vent cowl 110 mm dia

Anjili wood planks

Boulder 50 mm to 200 mm

Gravel 5 mm to 10 mm

Interlocking C.C. paver block (80 mm thick, M-30)

RADHAKRISHNAN NAIR K (BID ID -2216338)

Bidder Name

RADHAKRISHNAN NAIR K

Vimalan M