Supplying, Fabrication and fixing of Steel Truss under Completion of balance work of XEN Quarter PW Hyd Division Zanskar.

Stuctural steel work in built up section, trusses and framed work, eves boarding, weather boarding including cutting hoisting fixing in position and hollow MS rectangular pipe frame structure in main gate door side including all carriage and as per design approved by Engineer-in-charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per design approved by Engineer-in-charge.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,)

Providing and fixing water tank PUF sintex 1000 ltr including all necessary fixture and thermal insulation.

Providing and fixing upto floor five level precast cement concrete blocks including hoisting and setting in position in cement mortar 1:3 (1: cement :coarse sand) cost of required centring, shuttering and curing completed.(1: cement 3:course sand 6:graded stone aggregate. Including all carriage complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) including all carriage complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars. Including all carriage complete.

Centering and shuttering including strutting, propping etc and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Providing and laying 50mm thick mud over roof including all carriage complete.