Certain repair to toilet blocks to tech bldgs at AF Stn Jodhpur

Amount

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm not exc.4 sqm each complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed by Engr-in- Charge

Dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed.

M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified including demolition and as directed by the Engr-in - Charge.

S&F Aluminium Anodized aluminium frame/shutter for doors, windows, ventilators, partition wall with one or more rebates including handle, tower bolt, hinges etc complete all as specified and as directed.

Add for Powder Coating to Aluminium Anodized aluminium frame/shutter for doors, windows, ventilators, partition wall (minimum thickness of powder coating 50 micron) complete all as specified and directed

S&F for 12 mm solid PVC ply of 1st quality of approved colour fixed with necessary joining cleats, rubber packing, beading, screw etc complete all as specified and as directed by Engr-in-Charge.

S & F for 4.8 mm thick sheet glass ordinary quality in square exc 0.50 Sqm each in each pane including rubber beading for fixing of glass complete all as specified and as directed by Engr-in-Charge .

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.

M&L for preparation of old decorated unplastered surfaces of wall/ceiling, including brooming or steel wire brushing, scrapping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks by applying 2-3 mm thick wall care putty and applying two coat of oil bound distemper to wall incl cleaning of windows, door internal fitting & any other surfaces by removing splashes/ spot after finishing the job complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed by the Engr-in - Charge.

M&L for Vitrified light shade coloured tiles 9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed.

S&F coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed

M&L for Vitrified light shade coloured tiles 9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqm in skirting etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed.

M&L for glazed ceramic coloured wall tiles of size 450mm x 300 mm x 7-8 mm/1200 mm x 600 mm x 9-10 mm thick size as directed including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps,treads/risers jambs, pillars, win?dow-cills, cooking platforms/partition including chamfered in exposed edges and like in cement mortar (1:4) including pointing in white cement (1:2) us?ing marble dust with admixture of pigment to match with shade of granite incl necessary screed bed etc complete all as specified and directed

S&F in repair for 18/19 mm thick PVC moulded solid board, of approved colour decorative for cabinet boxes,shutters etc. with shelf and shutters full size fitted including coloured topping on all exposed edges under /above kitchen cooking platform and other platform including necessary ball catch fitting complete all as directed

S&F for Hasp and staple, safety type, stainless steel including bolt to hinge plate and fixed with screws all as specified and directed.

S & F for Continuous (piano) hinges width of flap 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed

S & F for stainless steel handles 75 mm long complete all as specified and as directed by Engr-in-Charge .

S&F in repair for 15 mm bore CP wall mixer (3-in-1 ) for mixing hot and cold water with arrangement for both telephonic hand shower and overhead shower with long bend pipe complete all as specified and directed (Make Cera cat part No. F1005413 (Ruby))/Johnson Cat part No. T3223C (Fusion)/Jaquar Cat part No. FUS-29281(Fusion) or equivalent

S&F in repair for One piece EWC with seat cover and Twin flush fittings of size 640 mm x 350 mm x 725 mm of snow white colour incl 220 mm S trap complete all as specified and directed ( Make Cera Catpart No. S1013208VS(Cattler)/Jaquar Cat part No. FSS-WHT-29853S300UFSM(Fusion)/Johnson Cat part No. G3907P0103 (VIGO) or equivalent

S&F in repair for counter top wash hand basin of size 520 mm x 450 mm x 200 mm of snow white colour incl all necessay fittings etc complete all as specified and directed (Make Cera Cat part no. S2030101 (Clair) / Johnson Cat part No. P6212PW0401 (Grande) /Jaquar cat part No. ARS-WHT-39601(ARIA) or equivalent)

S&F in repair for Single lever basin mixer with 450 mm braided connection pipe complete all as specified and directed (Make Cera Cat part No. F1005451(Ruby)/Jaquar cat part No. FUS-29052B (Fusion)/Johnson cat part No. T3245C (Fusion) or equivalent

S&F in repair for 15 mm bore angle valve fancy type, CP, cast copper alloy screwed down high presure, with wall flange complete all as specified and directed (Make Cera cat part No. F1005201 (Ruby)/Johnson cat part No. T3212C (Fusion)/Jaquar cat part No. FUS-29053 (Fusion) or equivalent)

S&F in repair for 15 mm bore Bib cock fancy type, CP, cast copper alloy long nose with wall flange complete all as specified and directed (Make Cera cat part No. F1005152 (Ruby)/Jaquar cat part No. FUS-29037 (Fusion)/Johnson cat part No. T3205C (Fusion) or equivalent)

S&F in repair for 15 mm bore 2 way CP bib cock with wall flange complete all as specified and directed (Make Cera cat part No. F1005161 (Ruby)/Johnson cat part No. T3208C (Fusion)/Jaquar cat part No. FUS-29041 (Fusion) or equivalent)

S&F in repair for fancy type overhead shower of size 200 x 200 mm with necessary fittings complete all as specified and directed (Make Cera Cat part No. F7010503AB/Jaquar cat part No. OHS-35497/Johnson cat part No. S0006C or equivalent

S&F in repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long SS braided connection pipe and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed (Make Cera cat part No. F8030111AB/Jaquar cat part No. ALD 563/Johnson cat part No. S00305C or equivalent)

S&F in repair for toilet paper holder with flap guard of SS grade 304 fitting with necessary screws complete all as specified and directed (Make Cera Cat part No. F5014110CH/Johnson cat part No. T1354C (Delta)/Jaquar cat part No. CAN-1153S or equivalent)

S&F in repair for CP towel ring of round shape with round flange complete all as specified and directed (make Cera/Johnson/Jaquar or equivalent)

S&F in repair for wall mounted Sink Mixer with flange with 150 mm long swivel spout and all other fittings complete all as specified and directed (Make Cera Cat part No.F1005501 (Ruby) or equivalent)

S & F in repair for PVC connection 15 mm size with nuts of length 450 mm, complete all as specified and as directed.(Make Cera cat part No. F8070402 or equivalent)

M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

S&F in repair for sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S & F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified and directed

S & F in repair for 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Supply and fix in repair Vitreous china urinal half stall type white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed

S&F in repair for CP urinal spreader fancy type of approved quality fixing with 8 mm dia CP connection up to angle valve complete all as specified and directed.

S&F in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed.

S&F in repair for CP grating of size 100 mm dia with/without waste hole complete all as specified

S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down old one all as specified and as directed.complete all as specifed and directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down old pipes all as specified and as directed.

All as per item No. 48 above but 110 mm dia .

S & F for 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed.

S & F PVC (SWR) bends any radius 75 mm dia, , in repairs all as specified and as directed

S & F PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and as directed.

M & L for IInd class hard- wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints complete all as specified and directed

M & L for 30 mm thick flush shutter solid core construction with block board core and both face covered with decorative face veneer lipping with frame to match complete all as specified and directed.

S&F in for hinges medium weight stainless steel of size 100 mm complete all as specified and directed.

S & F for stainless steel barrel tower bolts of 150 mm long complete all as specified and as directed by Engr-in-Charge .

S & F for stainless steel handles 150mm long complete all as specified and as directed by Engr-in-Charge .

S & F for stainless steel sliding door bolt with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and as directed by Engr-in-Charge.

S&F for Solid PVC frame (Single Rebated) of size 60mm x 30mm of approved colour made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with necessary screws complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and as directed.

S&F for butt hinges medium weight stainless steel of size 100 mm complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed.

S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed

S&F in repairs cast iron body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.complete all as specified

S & F in repair 150 mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and as directed.

S&F in repair for 18 mm thick PVC board with CNC approved pattern/design cutting of approved colour and fixed in position incl all necessary fittings, adhesive, sealent etc complete all as specified and directed

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including dismantling complete all as specified and as directed

S&F in repair for powder coated GI grid frame work of Silhouette grooved design for false ceiling fixed with screw suspended with 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed

S&F for 5-6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work including complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor/edge of floor etc complete all as specified and directed

Om Trading Corporation

Keystone Constructionare

New Vishvakarma Udhyog

VIKAS CONSTRUCTION CO.

J S Construction Company