Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | L1 | Accepted-AOC Lowest rate and hence the work is awarded to the Contractor vide Resolution No. 7(1) dtd.26/05/2026 of AreacodeBlock Panchayat and Agreement executed on 22/06/2026 | |
| 2 | L2₹13.5 L+₹2.0 L (17.4%)Rejected-Finance MARATHANAMETHIL HOUSE THOTTILANGADI P O IRUVATTI 673639 | IRUVATTI | MALAPPURAM | KERALA | 673639 | L2 | Rejected-Finance Higher rate hence rejected |
| Sl No | Description | Qty | Unit | ABDUSALAM L2 | SAHAL MOHAMMED L1 |
|---|---|---|---|---|---|
| 1.00Building Maintanance work | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,854.03 | kg | 207.88 ₹3,85,415.76 | 177.13 ₹3,28,404.33 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 555.36 | kg | 168.37 ₹93,505.96 | 143.47 ₹79,677.5 Lowest |
| 1.00 | OD462730/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should •have
protective guard film of 25 microns minirnum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size ,(5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required | 223.6 | sqm | 561.45 ₹1,25,540.22 | 478.38 ₹1,06,965.77 Lowest |
| 1.00 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 12.4 | cum | 7,176.65 ₹88,990.46 | 6,114.8 ₹75,823.52 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 136.24 | sqm | 332.84 ₹45,346.12 | 283.6 ₹38,637.66 Lowest |
| 1.01 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 136.24 | sqm | 72.77 ₹9,914.18 | 62.01 ₹8,448.24 Lowest |
| 1.01 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 136.24 | sqm | 155.61 ₹21,200.31 | 132.59 ₹18,064.06 Lowest |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 1,256 | kg | 160.61 ₹2,01,726.16 | 136.85 ₹1,71,883.6 Lowest |
| 1.01 | OD479076/2025-2026:Providing and fixing 200 mm wide, square cut PVC 4kgf/cm2 rain water gutter pipe with iron
brackets with 25x5 mm size flat, screws and washers etc., including making necessary
connections with rain water pipes etc. complete. | 56 | metre | 478.82 ₹26,813.92 | 407.98 ₹22,846.88 Lowest |
Tender Value
₹13.7 L
EMD Value
₹34,322
Closing Date
20 Mar 2026, 12:00 pmClosed
Assistant Executive Engineer
Office of the Assistant Executive Engineer, LID and EW Sub Division Areacode Block Panchayat
Annual Plan-AREEKODE BP - 2025-26 PROJECT NO.281 Completion of civil works of the Building Constructed under NABARD Fund in CHC Urngateeri 2nd Phase in urgattiry GP-Building work
2026_LSGD_847076_1
AEE/LSGD/AKD SD/TENDER-17/2025-26 NABARD
Open Tender
Civil Works - Buildings
Item Wise
300 days
Areacode Block Panchayath
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹34,322
1 Jul 2026
13 Mar 2026
21 Mar 2026
13 Mar 2026
20 Mar 2026
13 Mar 2026
13 Mar 2026 - 20 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building Maintanance work | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | OD462730/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should •have
protective guard film of 25 microns minirnum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size ,(5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required | 1 | sqm | - | - |
| 1.004 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | - | cum | - | - |
| 1.005 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.006 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | - | sqm | - | - |
| 1.007 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | - | sqm | - | - |
| 1.008 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.009 | OD479076/2025-2026:Providing and fixing 200 mm wide, square cut PVC 4kgf/cm2 rain water gutter pipe with iron
brackets with 25x5 mm size flat, screws and washers etc., including making necessary
connections with rain water pipes etc. complete. | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1431293.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.89 MB
281.rar
Tender Documents • 3.87 MB
BOQ_1431293.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .