SPECIAL REPAIRS TO BLDG. NO. P-26 UNDER SPECIAL REPAIRS B/R AT INS KALINGA UNDER GE (P) NAVY KALINGA

Amount

Dismantling of wall and ceiling boards (fiber,pulp insulation etc) or insulation board /slab/blankets any thickness including cover fillets, including removing of dismantled material from work site.

M&L anodised aluminium snap grid frame work for false ceiling.

Providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions .

Demolition of HP Tiles along with cement mortar in roof and clean the roof surface with water and using wire brush etc. Including old tar felt.

10 mm thick screed bed or bedding layer of cement mortar (1:3) for laying floor finishes and finished even smooth (without using extra lime or cement)

40 mm average thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in padding concrete using WPC as per manufacturer instructions.

Supply only liquid Water Proofing Compound (ISI marked) of approved make.

APP based polymeric membrane minimum weighing 3 Kg/Sq.m. and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sq.m.) laid on primed surface by forced application and applying a coat of solar reflective bituminous aluminium paint.

Dismantling stone slab and tiles of any description or thickness including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises.

Glazed ceramic tiles in vertical surface (skirting) 300x 450x 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free over rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3.

Non skid joint free ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 (Ist quality) as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 finished even and rough .

Taking down chowkats or frame with shutter (without taking off shutter from the frame) each area n.exc 1.50 sqm each .

Taking down chowkats or frame with shutter, (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4sqm each and removing from site.

Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, (minimum thickness of powder coating 50 micron).

Anodised powder coated aluminium window and ventilator shutters, side hung without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable anodised aluminium handles and rollers complete all as specified (minimum thickness of powder coating 50 micron).

Anodised coloured aluminium grill of design No DG-117, 10mm thickness of DECOGRIL or equivalent make as approved by GE fixed with and including 'F' sections.

200mm Aluminium anodised, barrel tower bolts of extruded section and fixed

150mm Aluminium anodised, barrel tower bolts of extruded section and fixed

Aluminium handles, cast type, anodised of size 150mm

300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane.

stainless steel wire cloth, 0.36mm nominal dia of wire average width of aperture 1.40mm and fixed with stainless steel wire staples

In repairs, 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC 32mm dia and connection to pipes and fixed.

PVC (SWR) floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) fixed in repair

In repairs, wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc.

In repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated.

In repair bib taps 15mm dia. fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Stop cock/ angle cock fancy type, chromium plated 15mm dia cast copper alloy, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union and fixed.

PVC flexible connections 15mm size with PTMT nuts of length 600mm.

In repairs vitreous china, white pedestal pattern (European type) water closet pan with cast iron 'P' and 'S' trap, including provision of fixing bolts and plastic seat cover white with hinging device including 32mm dia PVC flush pipe and connection to drain.

In repairs PVC Nahani trap/ floor trap with grating 100mm dia outlet jointed to waste pipe fixed in cement concrete type B1 (1:2:4).

In repairs, 1000 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layered ISI marked hoisted and fixed in position.

In repair PVC (SWR) pipes, rain water/ soil waste pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls.

Fixing only PVC (SWR) pipes, rain water/ soil waste pipes 110mm dia. single socketed in any length with rubber ring joints fixed to walls.

In repair PVC (SWR) pipes, rain water/ soil waste pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls.

Fixing only PVC (SWR) pipes, rain water/ soil waste pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls.

110mm dia PVC (SWR) plain bends any radius.

75 mm dia PVC (SWR) plain bends any radius.

110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar.

5mm thick plaster in CM 1:3 on fair surfaces of ceilings finished even and fair.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash.

Rendering 10mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and fair without using extra cement .

Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of oil putty1 mm thick.

Complete removal of the existing treatment on the wall surfaces and applying two coats of weather proof exterior emulsion over one coat of primer.

Preparation of Old decorative surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash.

Preparation of old plastered surface/ complete removal of existing treatment of any type & applying two coat of oil bound distemper over one coat of oil putty 1mm thick on plaster surface to walls

Providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth on plaster surface to walls.

RCC 1:1/2:3 Type-A (Using 20mm graded stone aggregate) as in chajjas, fascia, drops, parapets including necessary scaffolding and form work etc.

TMT bars 8mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required including cranking bending hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips.

RCC thin section such as chajja, drops, roof projection etc, demolition of RCC portion and repair the cutting portion in CM 1:3 complete including scaffolding.

Providing and injecting along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre including drilling and plugging holes etc in apron.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match with the existing floors.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site

25mm outer dia. 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

16mm outer dia. 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls, roof and floor etc as per existing specification.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site. (Note : To be measured only when found serviceable in all respects complete for reuse)

Point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface.

All as per Item no 63 here-in-before but for one fan point controlled by 1 one way switch and regulator.

All as per Item no 63 here-in-before but for one 3 pin switch socket outlet, 5 Amp on independent board.

All as per Item no 63 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches.

All as per Item no 63 here-in-before but for one 16 Amp 3 & 5 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire.

Sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete with taking down old unserviceable submain wiring and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends and making good disturbed surface. NOTE: 2 runs of 4 Sqmm, 1 run of 4 Sqmm and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e. RM

Sub main wiring with four single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete with taking down old unserviceable submain wiring and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends and making good disturbed surface. NOTE: Four runs of 6 Sqmm, Two run of 6 Sqmm and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e RM

Modular plate switch flush type single pole one way 6 Amp, 250 volt.

Fixing only switch flush button single pole one way 5 amp. (Material obtained from item No 62 here in before shall be used)

Switch flush type, single pole Two way 5 Amps 230 volts.

Modular plate switch flush type single pole one way 16 Amp, 250 volt.

Modular socket 6 Amps 5 pin.

Fixing only switch socket outlet 5 amp flush type. (Material obtained from item No 62 here in before shall be used)

Modular socket 6-16 amps 2/3 pin combined shuttered.

Modular step fan speed regulator 120 w ,2 module.

Modular plates white colour suitable for flush metal boxes for mounting modular switches or sockets etc for 8 modules.

All as per item no. 78 here-in-before but for 6 modules

All as per item no. 78 here-in-before but for 3 modules

All as per item no. 78 here-in-before but for 2 modules

Flush metal box 1/2 module.

All as per item no. 82 here-in-before but for 6 modules

All as per item no. 82 here-in-before but for 3 modules

All as per item no. 82 here-in-before but for 8 modules

Ceiling rose surface bakelite three terminals.

Fixing only ceiling rose surface bakelite three terminals. (Material obtained from item No 62 here in before shall be used)

Sheet metal enclosure for MCCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts.

Sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with dim rail earth and neutral bar.

MCCB four pole of capacity 100 amps, 415 Volts 25kA breaking capacity

MCB four pole of capacity 63 amps, 415 Volts 10kA breaking capacity

MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position.

MCB double pole of capacity 40 to 63 amps, 240 Volts C-series with 10kA breaking capacity.

Single pole and neutral enclosures of capacity 20 Amps, 240 Volts with 2 pin and earth plug and socket complete with one double pole MCB.

Indoor luminaire decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector. [Make: CG Cat Part no.CCS-100-20-65-HL2-DP-NWH or equivalent as approved by GE]

Recess mounting luminaries LED downlighter of 36 W white in the shape of Square 2' x2' feet complete.

10 W LED decorative CITY 3 wall/surface mounting polycarbonate body suitable for retrofit LED Lamp Base B-22 including lamp. Make : Havells cat no LHDL06160099 or equivalent as approved by GE

LED mirror light fittings 07 W, 230 V, 50 HZ suitable for indoor and outdoor applications.

Wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc.

AC three phase static Electronic KWH energy meter of accuracy class 1.0, 240v, 50Hz, with backalite LCD Display, of rating 10-60A with transparent hinged type Box with six month History of energy in KWH with taking down old meter and kept in MES store yard with accessories.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection.

Taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing.

Supply only ball bearings, bearing No.6201/6202 suitable for ceiling fan/exhaust fan of any sweep any make/model.

Supply only fan condenser up to 2.5 mfd suitable for ceiling fan.

Painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc 2 cm ).

Supply only mounting clamp assembly complete for ceiling fan 1200mm/1400mm sweep with amp, bolt,nut,washers, safety/ split pins and rubber brush.

Supply only down rod assembly complete foe ceiling fan 1200mm/1400mm sweep.

Ceiling fan 230 Volts 1200mm sweep, 5 STAR rating, BLDC 32W decorative blades complete including fan regulator, clamp, fan hook made out of 16 mm dia mild steel hook with all accessories including taking down old unserviceable fan and deposited in MES store yard.

Exhaust fan wall mount type 300 mm sweep metal body Heavy duty , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) .

In replacement louvers shutters for exhaust fan of any size up to 450mm sweep suitable for any make made of MS sheet including two coat of synthetic enamel paint over a coat of red oxide and bolt, nut, washers etc complete including taking down old unserviceable one.

Supply only cord flexible copper conductor three core 23/0.0076 Sqmm PVC insulate sheathed 1100V grade.

Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with stainless steel nuts and bolts and sufficient slot upto 2 mtr length buried directly and preferably vertically in ground with top flanged ended 0.5 mtr below ground level welded/ connected with GI strip 32 x 6 mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore any strata of soil to lower the CI pipe.

Note: 1. All items in the schedule shall be read in conjunction with S&F or M&L as applicable. 2. All items in the schedule shall be completed in all respect as directed by the Engr-in-Charge.