WORKS ADVERTISED TENDER FOR FABRICATION WORKS OF VARIOUS LINE MATERIALS (ITEMS) IN DABHOI STORE OF DABHOI (O&M) DIVISION. (Ref PR :-221493&206302 & 196925 ) (Rates are with GST) cost data 2024-25.

SCHEDULE -B FOR WORKS ADVERTISED TENDER FOR FABRICATION WORKS OF

VARIOUS LINE MATERIALS

(ITEMS) IN DABHOI DIVISIONAL STORE OF DABHOI (O & M ) DIVISION.

PURCHASE REQUSION NO.

SR. RATE AS PER COST

ITEM CODE DESCRIPTION UNIT QTY IN NOS. AMOUNT IN RS.

1 3611000016 9FT TOP ANGLE - MS ANGLE TOP FAB 65X65X6MM 11KV 2750MM Number 9500 40

2 2609000016 5FT TOP/TAPPING ANGLE - M.S. ANGLE CROSS ARM FAB 1500 MM 5 FT Number 9500 19

3 2609000034 11 KV V CROSS ARM - MS ANGLE Number 9500 56

4 2609000004 SIDE ANGLE 2FT - MS ANGLES CROSS ARM FABRICATED 600 MM-2 FT Number 9500 16

5 2601000084 TOP CLAMP FOR PSC POLES FOR 11KV Number 9500 17

6 3611000039 MS ANGLE BRACING CROSS ARM FABRI 11KV D.P. Number 5500 22

7 2614000002 ANCHOR RODS Number 5500 17

8 2614000009 TURN BUCKLE MS 16MM Number 5500 17

9 2614000012 EYE BOLT WITH NUT Number 5500 33

10 2609000080 EXTENTION OF RSJ POLE 100X116 FROM 9 MTR TO 11 MTR. Number 30 856

11 2609000081 EXTENTION OF RSJ POLE 100X116 FROM 9 MTR TO 13 MTR. Number 30 856

12 2609000048 11KV EXTENSION V CROSS ARM Number 450 213

13 2601000055 C CLAMP FOR GIRDER POLES-SIDE CLAMP Number 6000 7

14 2601000069 STAY CLAMP FOR PSC POLES Pair 6000 17

15 2601000049 SIDE CLAMP PSC- C CLAMP FOR PSC POLES 8 METER Number 5500 7

16 2601000071 STAY CLAMP FOR 116 X 100 MM GIRDER POLE SA Pair 8000 17

17 2601000040 C CLAMP FOR LT SHACKLE INSULATOR-MS Number 8000 6

18 901000024 G I EARTHING COIL 8 SWG Number 10000 13

TOTAL ESTIMATED AMOUNT Without 18% GST IN RS.

TOTAL ESTIMATED AMOUNT With 18% GST IN RS.

I/We am/are willing to carry out the above work at ______ % in words __________________________________

percentage above/below the estimated cost. Accordingly total amount comes to Rs. _______________. In words

percentage above/below the estimated cost. Accordingly total amount comes to Rs. _______________. In words

NOTE: 1- IN SCHDULE ''B'' MENSHIONED QUANTIES ARE ESTIMATED, QUANTIIES MAY BE INCREASE OR DECREASE IN EVERY WORKS. BUT ORDER VALUE WILL NOT BE CHANGED

2- PAYMENT WILL DONE AS PER ACTUAL EXCUSION OF WORKS.

3.RATES INCLUSIVE/EXCLUSIVE OF GST SHOULD BE CLEARLY MENTIONED IN YOUR QUAOTATION.

SIGNATURE OF CONTRACTOR

EXECUTIVE ENGINEER

(With Rubber Stamp & Date) DABHOI (O&M)DIVISION