Renovation of UDL House Kitchen in FACT Udyogamandal Township-Phase II

Renovation of UDL House Kitchen in FACT Udyogamandal Township-Phase II

Dismantling of walls of any thickness made out of brick, laterite or rubble in cement mortar including stacking of serviceable materials for reuse at places pointed out and disposal of debris to the low lying areas in Township within a lead of 150M as directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Taking down shutters of doors, windows or ventilators including removal of hinges and all other fittings and stacking materials in Township office.

Hacking of CC flooring including cleaning the surface etc. complete as per direction of the Engineer-in-Charge.

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level..

RCC work 1:1 1/2:3 nominal mix using first class 20mm and down grade hard granite broken stones including all charges for mixing , laying, consolidating, curing, handling and fixing in position, etc. complete but excluding cost of form work and reinforcement for slabs at different level, foundation footing, bottom and sides of trench , raft, plinth beams and pedestals over foundation footings of all shapes pile caps and mass concrete.

Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels.

Supply fabrication and fixing of steel structures made with M.S.Hollow square / Rectangular sections of TATA/JINDAL of different sections with insert plates ,legs etc .and blinding the section ends with M S plates etc. at all heights with necessary welding, scaffolding and painting with two coats of zinc cromate yellow mettal primer and two coats of synthetic enamel paint with all labour and material charge etc. complete

Supplying and fixing 4mm thick AC plain sheet for false ceiling work along with best quality Anjili wood beadings 40 x 16mm placed at 1.22M centres both ways nailed / screwed with required size screws, nails etc. complete including cost of all materials on the existing frame work at all levels..

Providing and fixing plain aluminium sheet of (0.71mm) or nearest available thickness to door shutters including cost of fixtures to the M.S. Hollow square / Rectangular sections frame etc .complete.

Providing and laying rectified Glazed Ceramic Antiskid floor tiles (thickness to be specified by the manufacturer),of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm excluding pointing the joints etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and applying wall putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Supplying and fixing pure polyester powder coated coloured aluminium frame work of extruded sections and approved brand/manufacturer including mitring the joints, fixing the frame work with necessary screws, drilling holes in floors, walls and ceiling, providing plugs for fixing screws, finishing the sides of packing between frame work and wall/ceiling with plaster of paris, cost of timber packing if necessary, rubber lining for air tightness, providing corner cleats, etc. complete as per standard practice for glazed doors, windows, side hung as well as sliding windows, ventilators, partitions etc. including all hinges, pivots, tower bolts, peg stays, fixtures, and pure polyester powder coated aluminium approved brand beadings, handles & approved locking system at all levels.(Payment will be given for the weight of aluminium sections only)

Supplying and fixing mosquito proof net using powder coated Aluminium frame with steel net (SS 316) to suit the existing window / Ventilator frames with suitable fixing arrangements as per instruction of Engineer- in -charge

Rendering male coolie inclusive of all charges of labour and hire for tools required for cleaning drains, collecting and dumping unwanted materials in low lying areas as directed and transporting bricks, cement etc. from stores, lifting to various heights, mixing mortars and castables, providing scaffolding or any other works as per the instructions of the Engineer-in-charge in all shifts including Sundays and Holidays .

Glazing steel and aluminium doors, windows and ventilators with plain glass panes and special metal sash putty of approved make, 3mm thick glass or nearest available.

Supplying 3 Burner Cooking Range with under cross support of size 1.5m x .7m x.45m, made up of top using 1.2 (18g)(304)SS sheet Side Cover & Control Panell using 1 mm(20G)(304)SS Sheet.Oil tray & handle Using 0.8(24g) (304) SS Sheet. Leg using 1 ½"sq.tube 18g(304).Cross using 1"sq.tube 18G(304) & Adjustable nylon boot. Burner using G10-2 Nos,G9 -1 nos Mcvalve-3 nos copper piktail-3 (Brand :United) castern Ground Grid (16"-2 nos,14"-1nos) or nearest sizes complete in all level.

Supplying Cutting table with Undercross support of size 200x100x85 which is made up of top of table using 1.2(18g) (304)SS sheet & Cross Pipe using 1"18g (304), Leg using 1½"18g(304) & adjustable Nylon Boot.

Supplying Veg.Storage Rack of size 150x60x70 which is made up of Top using1"sq.tube SS Pipe Tray type & ½"(18g) Mesh & Leg using 1½"18g(304) & adjustable Nylon Boot and cross pipe using 1"304.

Supplying and fixing of Stainless Steel Wall Mounted Hood with Baffle Filter with Exhaust & Fresh air system. Which include (i) Hood with Baffle filter & Oil Tray with Light arrangements of size 2.30m x 0.90m x 0.45m or nearest available size, in which Hood using 0.8(24G) (304) SS sheet, filter using 0.6mm(26G) (304) SS Sheet including Light using LED Tube light -2 nos white colour. (ii) Exhaust GI Ducting ( Duct of size 600 x300 using 0.6mm GI sheet with sheet flange joint,GI Duct supporting Joint material 8mm thread rod,1½" & 11/4" golden nut & Bolt,8mm Angler bolt & gas cut) (iii)Exhaust 1 HP Axle Flow Fan -3 Phase,OD 600, 1440 RPM, 4500CFM ,Motor Using Havells or Crompton. (iv)Fresh Air GI Ducting (Duct of size 500 x300 using 0.6mm GI sheet with sheet flange joint GI Duct supporting Joint material 8mm thread rod,1½" & 1 1/4" golden nut & Bolt,8mm Angler bolt & gas cut) (v)Fresh air 0.5 HP Axle Flow Fan -3 Phase,OD 500, 1440 RPM, 2500CFM,Motor Using Havells or Crompton (vi)Fresh air powder coating grill fixed Type-00 of size 300 mm x150mm -4nos. including all supports, joint material, Anger bolt, nut & all fixtures, driling of holes & fixing charges etc as per the instruction of Engineer -in -charge at all levels.

Providing Kitchen Base Cabinets with shutters, (Carcase in 16mm or nearest higher size Prelaminated Boilo ( Boiling Water Proof HDF Board ) ACTION TESA with 1mm texture MICA lamination ( century or green ) and all shutter board with Both side 1 mm laminated 18 mm Boilo, all exposed edges finished with 2mm thick PVC edge banding and hidden phases with 0.8mm thick PVC edge banding Rehau make and slider/Hinges with Hettich make) complete in all respect as approved by Engineer-in-Charge.

Supplying and fixing Kitchen accessories -Basket of Hettich make- (536 x 500 x 100) Cab.600 mm 4" Cup & Saucer

Supplying and fixing Kitchen accessories -Basket of Hettich make- (536 x 500 x 200) Cab.600 mm 8" Thali/Jar

Supplying and fixing Kitchen accessories -Basket of Hettich make- (536 x 500 x 94) Cab.600 mm 4' Cutlary

Supplying and fixing Kitchen accessories -Basket of Hettich make- Quadro Chanel ( Soft close ) 500 mm with catches

Supplying and fixing Kitchen accessories -Basket of Hettich make- Telescopic Slider ( Ordinary ) - 500 mm Telescopic slider

T K SALIM (BID ID -3171726)

MOHAMMED SHAREEF T.S (BID ID -3171742)