Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹83,100
Closing Date
30 Jul 2026, 10:30 pmDue today
Bengaluru Development Authority
Vasantha.P.R
8317437834
Providing Power Supply Connections to Borewells for Watering Plantations at Various Locations in Nadaprabhu Kempegowda Layout, Dr. K. Shivarama Karanth Layout (DSKL), and Banashankari Layout, BDA, Bengaluru.
BDA/2026-27/EL/WORK_INDENT261
BDA/2026-27/EL/WORK_INDENT261
Open
Electrical
Two Tender Document System(Two Cover)
BDA Electrical Division
4 documents required · 0 mandatory · 4 optional
Documentary proof for clause no.3.2 (b) of ITT Tenderer such as Work done, Performance Certificate issued by the end user not below the rank of Executive/Divisional Engineer.
Audited financial statements i.e. Balance Sheets, P&L Statement, Turnover Certificates, IT returns for and Auditors reports of the last five year proceeding the date of bid submission of the bidder duly certified by Chartered Accountant as in clause no.3.2 (a) of ITT.
Bankers Certificate duly signed by authorized person in the prescribed format and as per the clause no.3.4 of ITT (liquid Assets and / of availability of credit facilities).
The tenderer should possess required valid Electrical Contractors License issued by the Government of Karnataka. as in clause no.2.2 of ITT.
Documentary proof for clause no.3.3 of ITT Assessed available tender capacity such as statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause no.1.4A of Qualification Information.
Self Declaration stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct as per the clause no.3.3 of ITT and at clause no.1.4 (a) of Section - 3 - Q I.
Self Declaration stating that the works for which tenders already submitted as per the clause no.1.4 (b) of Section - 3 - Q I.
Ladder van owned /hired by the tenderer and proposed to be deployed on this contract, if awarded. The documents of the vehicle and the ownership /hire of the ladder van i.e. proof of vehicle, registration, permit, agreement etc., shall be enclosed with the tender without fail. The documents of the vehicle and the ownership /hire of the ladder van i.e. proof of vehicle, registration, permit, agreement etc., shall be enclosed with the tender without fail. as per the clause no.1.5 of Section - 3 - Q I.
Nil
Nil
Nil
Nil
Mandatory Conditions/requisites shall be fulfilled by the successful Bidder. Hence the duly signed affidavit comprising the depicted details there in shall be submitted (Up loaded through e-portal) by the bidder/ participant in Rs 500/- Value Stamp Paper along with other binding documents. Failing to submit the solemnly declared & duly signed undertaking with the given content shall be rejected.
₹1,040
₹83,100
23 Jul 2026
23 Jul 2026
31 Jul 2026
24 Jul 2026
Providing Power Supply Connections to Borewells for Watering Plantations at Various Locations in Nadaprabhu Kempegowda Layout, Dr. K. Shivarama Karanth Layout (DSKL), and Banashankari Layout, BDA, Bengaluru.
1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm as per specification and direction of the engineer in charge of work.
Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable as per specification and direction of the engineer in charge of work.
Suspension Clamp Assembly 16 to 70 mm (Excluding pole clamp & Eye Hook) as per specification and direction of the engineer in charge of work.
Pole clamp for HT/LT AB cable as per specification and direction of the engineer in charge of work.
Eye Hook (Flat type) for fixing Clamps as per specification and direction of the engineer in charge of work.
Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm (excluding pole clamps and Eye hook) as per specification and direction of the engineer in charge of work.
Universal Hook, Bolts & nuts as per specification and direction of the engineer in charge of work.
T-connector KZ3 95 as per specification and direction of the engineer in charge of work.
Cable Straight thru' joints suitable for 95 Sqmm LT ABC as per specification and direction of the engineer in charge of work.
Pre-Insulated lugs - CPTAU for 95 Sqmm as per specification and direction of the engineer in charge of work.
End cap for 50/70 Sqmm as per specification and direction of the engineer in charge of work.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable 240 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) as per specification and direction of the engineer in charge ...
Epoxy Terminating Kit (Pothead) suitable
for 1.1 kV, LTUG Cable Up to 3.5C x225/240/300 Sqmm as per specification and direction of the engineer in charge of work.
Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 , 25 Sqmm, 3.5/240/300 sqmm as per specification and direction of the engineer in charge of work.
PSCC Pole - 9 Mtr Long, 200 Kg WL as per specification and direction of the engineer in charge of work.
LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - 8 Mtr Long, 115 Kg WL as per specification and direction of the engineer in charge of work.
1.1 kV Class Armoured Aluminium Cable 4Cx6 Sqmm as per specification and direction of the engineer in charge of work.
3 Nos Porcelain Cutouts 63 Amps with Wooden Plank (Extracted from Vol-6, PWD Ele SR Sl No. 268) as per specification and direction of the engineer in charge of work.
Guy Set Complete with No. 8 Strain Insulator as per specification and direction of the engineer in charge of work.
Earthing materials pipe type for grounding (Single Electrode with accessories) as per specification and direction of the engineer in charge of work.
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fron...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. with all lea...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. w...
Fixing of 1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm as per specification and direction of the engineer in charge of work.
Fixing of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections as per specification and direction of the engineer in charge of work.
Fixing of Suspension Clamp Assembly 16 to 70 mm (Excluding pole clamp & Eye Hook) as per specification and direction of the engineer in charge of work.
Fixing of Pole clamp for HT/LT AB cable as per specification and direction of the engineer in charge of work.
Fixing of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm (excluding pole clamps and Eye hook) as per specification and direction of the engineer in charge of work.
Fixing of Universal Hook, Bolts & nuts as per specification and direction of the engineer in charge of work.
Fixing of T-connector KZ3 95 as per specification and direction of the engineer in charge of work.
Making of Cable Straight thru' joints suitable for 95 Sqmm LT ABC as per specification and direction of the engineer in charge of work.
Fixing of Pre-Insulated lugs - CPTAU for 95 Sqmm as per specification and direction of the engineer in charge of work.
Fixing of End cap for 50/70 Sqmm as per specification and direction of the engineer in charge of work.
Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL as per specification and direction of the engineer in charge of work.
Fixing of LT 4 Pin Cross Arm with clamps as per specification and direction of the engineer in charge of work.
Fixing Guy Set Complete with No. 8 Strain Insulator as per specification and direction of the engineer in charge of work.
Digging of Pit for providing GI Pipe type Earthing as per specification and direction of the engineer in charge of work.
Fixing of Earthing (pipe type) as per specification and direction of the engineer in charge of work.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers ,240 to 300 Sqmm as per specification and direction of the engineer in charge of work.
Making of Heat shrinkable Type Terminations 240 Sqmm as per specification and direction of the engineer in charge of work.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Steel TMT Fe 550 / 550 D. with all lead and lift, loading and unloading charges, including cost of all materials labour charges, all other incidental charges, ete, complete as per specification and di...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
New Bid Documents for APS to WSBP at BSK-NPKL-DSKL.docx
Tender Document • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].