Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.2 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹36.6 L+₹4.1 L (12.8%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest | |
| 3 | L-3₹36.8 L+₹4.4 L (13.5%)Rejected-AOC | L-3 | Rejected-AOC Other than Lowest | |
| 4 | L-4₹39.6 L+₹7.1 L (21.9%)Rejected-AOC | L-4 | Rejected-AOC Other than Lowest | |
| 5 | L-5₹42.0 L+₹9.5 L (29.3%)Rejected-AOC | L-5 | Rejected-AOC Other than Lowest |
Tender Value
₹31.5 L
EMD Value
₹63,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF 10 KVA STABILIZER AT DET 10 COMPO,SPL REP TO BLDG NO T-02 AT DET, BLDG NO T-7F SERVANT QTR AND BLDG NO T-32 SPWD AND SPL REP TO INTERNAL WIRING WITH FITTINGS AND FIXTURES IN BLDG NO T-20 AT HAWS GULMARG UNDER GE 969 EWS
2022_MES_545121_1
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
GULMARG
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
Yes
GE 969 EWS
₹63,000
Yes
6 Oct 2022
12 Aug 2022
12 Sept 2022
12 Aug 2022
10 Sept 2022
29 Aug 2022
Amount
Demolition of cement concrete pavings n.exc 15cm (unreinforced) in ground floors and depth (below or above ground level) complete all as specified.
M&L 75mm thick PCC 1:3:6, type C-2, (40mm graded aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement complete all as specified.
M&L 75mm thick PCC 1:3:6, type C-2, (40mm graded aggregate) as in sub base floors and including preparation of well rammed/compacted earth complete all as specified.
M&L 50mm thick PCC 1:3:6, type C-2, (40mm graded aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement complete all as specified.
M&L for 75mm thick PCC type 1:4:8, type D-2 (using 40mm graded aggregtate) as in sub base floors complete all as specified and directed.
M&L for 25mm thick PCC type 1:2:4, type B-0 (using 12.5mm graded aggregtate) as in leveling coarse complete all as specified and directed.
M&L for 40mm thick PCC type 1:2:4, type B-0 (using 12.5mm graded aggregtate) as in floor surface even and fair, without using extra cementcomplete all as specified and directed.
S&F chequerred cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigments, set jointed and pointed in neet cement slurry in floors including screed bed 15mm thick complete in CM 1:6 complete all as specified and directed.
Demolition of brick work or stone masonery of any type built in cement mortor in foul condtion etc complete all as specified.
M&L Brick work with sub class 'B' bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified.
Dismantling wall and ceiling boards (Fibre, pulp, insulation etc) and boarding any thickness including cover fillets complete complete all as specified and directed.
M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc. complete all as specified.
M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc. complete all as specified.
S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 6 Sqcm and n.exc 13 Sqcm complete all as specified and directed.
S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 sqcm and n.exc 25 Sqcm complete all as specified and directed.
Dismantling boarding, any description fixed in any position with nails complete all as specified.
S&F second class softwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified.
S&F second class softwood 20mm thick facia boarding fixed with nails in any situation planed one side with butt joints complete all as Specified.
S&F second class softwood boarding in floor and skirting 40mm thick planed one side with butt joint and fixed with nails for repair to existing floor in patches etc complete all as specified.
All as per item 19 above but except boarding fixed with nails.
Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified.
Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.
M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces on walls and finished surfaces even and smooth without using extra cement using water proofing compound 3% by weight of cement complete all as specified. (Note: Water proofing compound to be measured and paid seperately).
Supply only integral waterproofing compound.
Dismantling timber scantling 40 Sqcm and over in section in any position framed work.
M&L second class hard wood clean sawn as in scantling in framed work.
All as per srl item no 26 above but except timber only
Taking down chowkats or frames but with shutters (without taking off shutters from the franme) not exc 1.50 Sqm and removal from site all as Specified and directed.
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm.
S&F 2nd Class softwood plain, solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joint all as specified and directed.
S&F 2nd class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-1) kiln seasoned and chemically pressure treated.
S&F 2nd class soft wood 30mm thick skelton shutters open rebated and prepared to receive etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (b) for windows ventilators etc are provided with stiles and rails complete all as specified.
MS Cold rolled butt hinges medium weight 100mm long complete all as specified.
MS Cold rolled butt hinges medium weight 75mm long complete all as specified.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all specified.
S&F 300mm long brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with with rolled or drawn brass bolts and fixed complete all specified.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.
S&F 200mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified.
S&F 100mm size butt hinges cast brass with brass hing pin, bright polished and fixed type B-11 complete all as specified.
S&F 150mm long extruded, aluminium alloy handles, fabricated type anodised and fixed complete all as specified.
S&F 100mm long extruded, aluminium alloy handles, fabricated type anodised and fixed complete all as specified.
S&F 150mm long brass handles, cast type , polished bright and fixed complete all as specified.
M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified.
Preparation of new plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified.
Complete removal of existing treatment of walls and applying two coat of Cement Base Paint of approved tint, complete all as specified.
Prepartion of new or previously untreated surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified.
Prepartion of old painted surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.
S&F 15mm bore medium graded GI tubing with ali fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.
S&F 20mm bore medium graded Gl tubing with all fittings and fixed complete to wall and ceiling or laid in trenches complete all as specified.
S&F in repairs 15mm bore angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified.
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.
Corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard complete all as specified.
S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.
S&F in repair PVC connection 15 mm 450 size with PTMT nuts of length mm of approved quality complete all as specified.
S& F in repair PVC low level cistern of 10 liter capacity inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified.
S&F continous (piano) hinges of brass, bright finish or electrogalvanised 30 width of flap (When open) complete all as specified and as directed.
S&F 18/19mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified.
Extra over rates of block board or veneered particle board (18/20mm) for external teek wood lipping, 6mm thick fixed with nail complete all as specified.
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 grams per square metre complete all as specified.
All as per srl item no 61 above but except sheet
S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 grams per square metre complete all as specified.
Preparing new zinc (or galvanized) surfaces to receive painting by coating with mordant solution including washing and cleaning etc of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
Preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint all as specified.
M&L for complete removal of existing treatment applying a coat of chalk whiting, on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper on existing surfaces on walls.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L glazed coloured ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slury and pointed in white or coloured cement to match complete including rendering 10mm thick in cement mortar 1:4 complete all as specified.
S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.
M&L for providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) and set in cement mortar 1:6 in landings, cover slabs, chullah hoods, chajjas, water troughs etc complete all as specified.
M&L TMT bars 10 mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia. complete all as specified.
M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified.
M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.18Sqm but n.exc 0.38 Sqm in floors set and jointed pointed in white or coloured cement to match complete all as specified.
S&F vitreous china wash hand basin coloured with pedestal, flat back size 630x450mm excluding taps,waste chain, & plug and porcelain stopper but incl bkts waste pipe, PVC connection, 32mm CP waste coupling etc complete all as specified.
S&F 15mm dia CP Basin Mixer for mixing hot and cold water, screwed for iron pipe and fixed complete all as specified.
S&F 15mm dia bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm dia and conforming to IS-781-1977, complete all as specified.
S & F Viterous China Squatt pattern of pattern long pan, size 580mm white with 'P' or 'S' trap, front or back inlet and food rests and pattern including seat cover (excluding flushing cistern and flush pipe), complete all as specified.
M&L for rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement. Complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash. Complete all as specified and as directed.
M&L 12mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc complete all as specified.
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches. ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe Custody for reuse at site and making good disturbed surfaces of walls, floors etc. complete all as specified.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
One light point/fan point/Exhuast fan point controlled by one 5 Amps switch one way
One 3 pin 5 Amp switch socket outlet on independent board
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type,universal complete all as specified and as directed.
S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S&F Distribution Board, SPN 12 Way, single door complete all as specified and as directed.
S&F Distribution Board, SPN 8 Way, single door complete all as specified and as directed.
S&F Distribution Board, SPN 4 Way, single door complete all as specified and as directed.
Supply and fixing 240v, 10 KA B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB SPN 40 Amp complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB SPN 32 Amp complete with connection testing and commissioning.
S&F LED Lamp 15 W complete all as specified.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as specified and as directed.
S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete all as specified and as directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.
S&F heating element (round/traingular) including rubber gasket & washer etc of capacity from 1.5 to 2 KW suitable for existing make and shape complete all as specified and as directed.
S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450 mm complete all as specified and as directed.
Supply and fix Voltage stabilizer for automatic operation. Single phase naturally oil cooled indoor type & designed for input variation between 90V to 270V with output voltage stabilized at 220 to 240 Volt with accuracy +- 1% and speed of correction 50 Volts per second and of capacity 10 KVA. Complete all as specified and as directed.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with of the top edge plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3.6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gi pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc
Note:- Schedule of credit Rs. 1,21,455.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S G M DAR AND SONS
M/S KULWANT SINGH RAINA AND CO
M/S ABDUL AHAD AND SONS
ALI MOHD NAJAR
LONE CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .