REPAIRS TO JOINERY ROOF CEILING SUNKEN FLOOR SANITARY FITTINGS PLUMBING FLOORING PLASTERING PLINTH PROTECTION AND CONNECTED WORKS AND RELATED WORKS IN ZONE D AREA UNDER AGE BR N NO I OF GE N SEC BAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed

Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2010 complete all as specified and as directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2010 as applicable complete all as specified and as directed

Supply and fix butt hinges of 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed

S & F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed

M&L 35mm thick 2nd class hard wood, glazed and skelton shutters for doors, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc ; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and as directed

S&F Stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, or galvanised wire staples complete all as specified and as directed

S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed

S & F MS pressed handles oval type stove enameled black 150mm size complete all as specified and as directed

S & F MS barrel tower bolts 200mm long stove enameled black with bright bolt and fixed complete all as specified and as directed

S & F MS barrel tower bolts 150mm long stove enameled black with bright bolt and fixed complete all as specified and as directed

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

S&F MS work as in hold fast made in flat iron complete all as specified and as directed

Preparation of wood surface, treating the back of chowkhat, end of post etc area tarred exceeding 0.1 Sqm but not exceeding 0.5 sqm with coal Tar black paint each complete all as specified and as directed

Treating small articles such as hold fasts, ends of posts, backs of chowkats etc area not exceeding 0.11Sqm with coal Tar black paint each complete all as specified and as directed

M & L applying two coats of synthetic enamel paint over a coat of pink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surfaces complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified and as directed

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and as directed

S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and as directed

S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane and complete all as specified and as directed

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed

M&L Iind class hard wood plain fillets of sectional area exceeding 6 sqcm & not exceeding 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face complete all as specified and as directed

M&L Iind class hard wood plain fillets of sectional area exceeding 13 & not exceeding 25 sq.cm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face complete all as specified and as directed

S&F in repairs for 18mm thick Plywood grade BWR type BB , fixed with screws to frame work complete all as specified and as directed

S&F in repairs for 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work complete all as specified and as directed

S & F in repairs Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as complete all as specified and as directed

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters complete all as specified and as directed. Make NCL Alltech or equivalent as approved by GE.

Supply and fix steel windows (glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm . 4mm thick plain sheet glass to be used for glazing of glazed shutters. complete all as specified and as directed Make NCL Alltech or equivalent as approved by GE.

Supply and fix steel windows (Fly proof shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. Sections for frame should be of 48mmx50mm, section for mullian should be 48mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing wire mesh should be of 18mm x 0.6mm . 0.35mm dia 1.40mm aperture stainless steel wire mesh to be used for glazed shutters complete all as specified and as directed. Make NCL Alltech or equivalent as approved by GE.

S&F framed work as in grills, gratings, guard bars etc., conforming to Fe 310 -0 complete all as specified and as directed

M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces complete all as specified and as directed

Dismantling of Single layer Mangalore pattern tiles in roofing complete all as specified and as directed

S&F for mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and as directed

Fixing only mangalore pattern tiles complete all as specified and as directed. Note: The serviceable tiles obtained from dismantiling shall be reused.

S&F Ridge tiles to suit mangalore pattern of roofing tiles beded and jointed in CM 1:6 complete all as specified and directed

Dismantling of tile batten shingles etc., of any size including fillets of spacing exc 15 CM from roof complete all as specified and as directed.

M & L for second class HW battens clean swan exceeding 15 sqcm & not exc 25 sqcm at 30cm centres complete all as specified and as directed

All as per Sl item No 42 above but fixing only second class HW battens complete all as specified and as directed. Note: The serviceable battens obtained from dismantiling shall be reused.

M& L for preparation of old tile battens and applying one coat of creosite oil complete all as specified and as directed

All as per Sl item No 44 above but applying two coat of creosite oil including preparation of new surfaces complete all as specified and as directed

Dismantling of timber scantling 40 sqcm and over in section in any position inframed work complete all as specified and as directed

Fixing only timber scantling in roofs complete all as specified and as directed. Note: The serviceable scantling obtained from dismantiling shall be reused.

M & L Second class hard wood in scantling clean sawn complete all as specified and as directed

M & L for preparation of old wooden rafter surfaces and applying one coat of creosite oil complete all as specified and as directed

M& L for preparation of new wooden rafter surfaces and applying two coats of creosite oil complete all as specified and as directed

Dismantling of AC Corrugated sheets/ fibre sheet in roof covering complete all as specified and as directed

S&F for 6 mm thick asbestos cement corrugated sheet fixed with L/J type or cranked hook bolts complete all as specified and as directed

All as per Sl item No 52 but excepts sheets complete all as specified and as directed. Note: The serviceable sheets obtained from dismantiling shall be reused.

M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed

Fixing only asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed. Note: The serviceable ridge obtained from dismantiling shall be reused.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed

Taking up or down the existing steel tubing/CPVC pipe 15mm bore including all connections and making good the disturbed surfaces complete all as specified and as directed

All as per Sl Item No 58 above but 20mm bore complete all as specified and as directed

All as per Sl Item No 58 above but 25 to 32 mm bore complete all as specified and as directed

All as per Sl Item No 58 above but 40 to 50 mm bore complete all as specified and as directed

Refixing old steel tubing 15 mm bore including all connections in new or old position of walls, ceilings, floors etc complete all as specified and as directed

Refixing old steel tubing 20 mm bore including all connections in new or old position of walls, ceilings, floors etc., complete all as specified and as directed

Supply and fix 15 mm bore steel water tubes, ‘medium grade’ galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix 20 mm bore steel water tubes, ‘medium grade’ galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix 25 mm bore steel water tubes, ‘medium grade’ galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix 40 mm bore steel water tubes, ‘medium grade’ galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and laying of CPVC pipes 20 mm outer dia, SDR 11 including plain CPVC SDR 11 fitting on walls/ceiling or laying in floor complete all as specified and as directed. NOTE : 1. CPVC fittings with brass threading will be measured and paid separately. 2. Cost of normal SDR CPVC fitting like bend, Tee, Elbow, union etc shall be inclusive in quoted rate.

Supply and laying of CPVC pipes 25 mm outer dia, SDR 11 including plain CPVC SDR 11 fitting on walls/ceiling or laying in floor complete all as specified and as directed. NOTE : 1. CPVC fittings with brass threading will be measured and paid separately. 2. Cost of normal SDR CPVC fitting like bend, Tee, Elbow, union etc shall be inclusive in quoted rate.

Supply and fix CPVC 20 mm outer dia brass elbow complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia brass elbow (3/4 x 1/2) complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia brass Tee complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia male brass Threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and as directed.

Supply and fix CPVC 25 mm outer dia male brass Threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia female brass Threaded Adoptor (3/4 x 1/2) (FTA/FBTA) complete all as specified and as directed.

Supply and fix CPVC 25 mm outer dia female brass Threaded Adoptor (3/4 x 1/2) (FTA/FBTA) complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia brass Tank Adoptor complete all as specified and as directed.

Supply and fix CPVC 25 mm outer dia brass Tank Adoptor complete all as specified and as directed.

Supply and fix CPVC 20 mm outer dia brass Unoin complete all as specified and as directed.

Supply and fix CPVC 25 mm outer dia brass Unoin complete all as specified and as directed.

Supply and fixed in repairs stop valves concealed type, cast copper alloy, screwed down, high pressure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed to 15mm bore pipe or union complete all as specified and as directed

Supply and fixed in repairs 15 mm bore bib taps chromium plated, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, and screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixed in repairs of 15 mm bore stop cock/angle Cock, brass chromium plated angle cock, fancy type, high pressure and screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ screwed for iron pipe fixed complete all as specified and as directed.

Supply and fixed in repairs tubular towel rail of 20 mm dia, D type of brass chromium plated 60 centimetre long between flanges, including brackets complete all as specified and as directed.

Supply and fixed in repairs brass chromium plated shower rose of 125mm size with or without swivel joints including fixed to GI pipes complete all as specified and as directed

Supply and fixed in repairs 15 mm dia gun metal gate valve of ISI marked with iron wheel head at both end fixed for iron pipes complete all as specified and as directed

Supply and fixed in repairs 20 mm dia gun metal gate valve of ISI marked with iron wheel head at both end fixed for iron pipes complete all as specified and as directed

Supply and fixed in repairs stainless steel sink with draining board overall size 915mmx460mm and bowl size 410mmx330mmx160mm made out of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall, including cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Supply and fixed in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified and as directed.

Supply and fix in repairs vitreous China wash down water closet pan (Pedestal Pattern), white colour with fixing bolts, plastic seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise and making good the disturbed surfaces of floor to match with adjoining surfaces complete all as specified and as directed

Supply and fix in repairs of vitreous china wash basin, white, flat back, size 550 X 400 mm waste pipe 75 centimetre long, 32 mm PTMT waste coupling complete all as specified and as directed

Supply and fix In repairs 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, wall or in floors complete all as specified and as directed.

Supply and fixed in repairs 40 mm bore LDPE pipes of pressure rating 6 Kgs/Cm2 laid in floors for spouts in sunken floor complete all as specified and as directed

Supply and fixed in repairs 110 mm dia PVC (SWR) bends with access door of any radius complete all as specified and as directed

Supply and fixed in repairs of 110 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door complete all as specified and as directed.

Supply and fixed in repairs of 110 mm bore PVC (SWR) branch piece (double Y or T) equal or un-equal with access door complete all as specified and as directed.

Supply and fixed in repairs 75 mm dia PVC (SWR) plain bends with oval access door of any radius complete all as specified and as directed

Supply and fixed in repairs of 75 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door complete all as specified and as directed.

Supply and fix PVC (SWR) Vent cowl of 110mm bore complete all as specified and as directed

Supply and fixed in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in plain cement concrete 1:2:4 type B1 complete all as specified and as directed

Disconnecting the existing tanks of capacity 500 litres and Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water of RCC or PVC tanks including writing the date with synthetic enamel paint on PVC or RCC tank complete all as specified and as directed

Disconnecting the existing tanks of capacity 1000 litres and Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water of RCC or PVC tanks including writing the date with synthetic enamel paint on PVC or RCC tank complete all as specified and as directed

Supply and fixed in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed

Supply and fixed in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed

Supply and fixed in repairs 40 mm dia waste coupling of PTMT (Half or Full thread) of minimum weight 60 grams complete all as specified and as directed.

Supply and fixed in repairs 32 mm dia waste coupling of PTMT (Half or Full thread) of minimum weight 45 grams complete all as specified and as directed.

Supply and fix 32 mm dia waste coupling of PTMT (Half or Full thread) of minimum weight 45 grams complete all as specified and as directed.

Supply and fixed in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.

Supply and fix in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats,(minimum weight 300 grams) complete all as specified and as directed

Supply and fixed in repairs PVC connection pipe of 15mm dia with chromium plated nuts of length 600 mm complete all as specified and as directed

Supply and fixed in repairs PVC connection pipe of 15mm dia with chromium plated nuts of length 450 mm complete all as specified and as directed

Supply and fixed in repairs 15 mm dia ball valves high pressure of PTMT with polythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fixed in repairs 20 mm dia ball valves high pressure of PTMT with polythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and as directed.

Material and labour for cutting chases, pinning in making good to facings wherever required and pointing in cement mortar 1:3 to edges for concealed tubing or concealed conduit wiring etc and making good cutting exceeding 10 centimetre girth including finishes, periodicals to suit with the existing surface complete all as specified and as directed

Supply and fixed in repairs 10 litres capacity PVC low level flushing cistern with ISI marked body, ISI marked siphon with inlet, ball valve, float and handle, cast iron brackets and 32 mm dia PVC flush pipe complete all as specified and as directed.

Supply and fix in repairs 100mm dia PVC grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Dismantling of stone slabs or tiles of any description or thickness laid dry and pointed in any mortar, in floors, aprons etc complete all as specified and as directed.

Material and labour for 18-20 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:6 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed

Material and labour for rounding and grinding of edges of granite platform both side rounded and grinding the stone complete all as specified and as directed

Material and labour for glazed ceramic tiles of approved colour of size 300x200x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 including complete all as specified and as directed

Material and labour for Non skid coloured ceramic tiles of size exceeding .0.06 square metre but not exceeding 0.11 square metre of 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of cement mortar 1:6 of 15 mm thick complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles of first quality 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors set and jointed in neat coloured cement slurry and pointed in coloured cement to match, laid over 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for light shade Virified Ceramic tiles 10 mmthick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, infloors etc. and set and jointed in neat coloured cement slurry and pointed in coloured cement to match, laid over 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 centimetre thickness (below or above ground level) complete all as specified and as directed

Material and labour for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor finishes and finished even and smooth using extra cement complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 20 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for 75 mm thick plain cement concrete 1:4:8, type D2 by using 40 mm graded stone aggregate as in sub base to floor complete all as specified and as directed.

Material and labour for cement concrete chequered tiles of size 300x300x22-25mm thick of any, pattern and tint as approved set, jointed and pointed in neat cement slurry in floors with grey cement without pigments over 15mm thick 1:6 Screed bed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position in sunken floors complete all as specified and as directed

Material and labour for plain cement concrete 1:4:8, type D2 by using 40 mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified and as directed.

M & L PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete, all as directed and as specified.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base concrete to receive floor finishes complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed.

Supply only integral water proofing compound of ISI marked complete all as specified and as directed.

Supply and fixed in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in PARRY WARE/CERA as approved by GE.

Supply and fix PVC lid for 500/1000 litres capacity water tank complete all as specified and as directed

Material and labour for removing the plants from the surfaces of the building with complete roots, applying recommended chemical to prevent further growth as directed, making good the disturbed surfaces with cement mortar 1:3 and applying the same surfaces finish of the existing surfaces and finished to match with the surrounding surfaces including removal of debris etc., out side the premises complete all as specified and as directed

Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed

Material and labour for rendering 5 mm thick on celings on fair faces of brick work or stone masonary or concrete surfaces in cement mortar 1:3 and finished the surface smooth and even without using extra cement complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on celings complete all as specified and as directed

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc complete all as specified and as directed

Dismantling of existing bituminous felt of water proofing treatment / or any other felt complete all as specified and as directed

Demoliton of lime concrete / cement concreteof any description and in any position complete all as specified and as directed

M& L for plain cement concrete (1:2:4) type B0 using 12.5mm graded aggregate as in levelling/ padding course on roof slab for water proofing treatment complete all as specified and as directed

M & L rendering 10mm thick on concrete surface in CM (1:4) and finishing even and smooth without using extra cement with using WPC including taking down exiting plastering on roofs complete all as specified and as directed NOTE: WPC will be measured and paid separately.

M & L for providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed

Taking down and re fixing of shutters in same opeining after easing of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and as directed

Taking down and re fixing of shutters in same opeining after easing of any description not exc 1 sq.m each complete all as specified and as directed

S&F in repairs Butt hinges med weight cold rolled mild steel and fixed 100mm size fixed complete all as specified and as directed

S&F in repairs Butt hinges med weight cold rolled mild steel and fixed 75 mm size complete all as specified and as directed

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed

S&F in repairs Aluminium anodised barrel tower bolt of extruded section and 150 mm long fixed complete all as specified and as directed

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 centimetre thickness (below or above ground level) complete all as specified and as directed

M&L reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded aggregate) as in slab supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for formwork to sides and soffits o floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as directed.

M&L for mild steel TMT bars 6 to 8mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia or securing clips ect., complete all as specified and as directed

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

S&F in repairs aluminium anodised Hasp and staple 100mm size, mildsteel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed

M&L for complete removal of existing treatment on ceiling surfaces and applying two coats of white wash on ceiling surfaces etc all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of primer over two coats of birla care wall putty etc complete all as specified and as directed

S&F in repairs 20mm bore decorative powder coated curtain rod with decorative finials complete all as specified and as directed

S&F in repairs decorative finials suitable for 20mm bore curtain rod complete all as specified and as directed

S&F in repairs 150mm size aluminium plate type hook and eye complete all as specified and as directed

S & F as in repairs anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S& F as in repairs Anodised aluminium section for doors, windows, ventilators &partions with one or more rebates including jointing cleats for fixing etc complete all as specified including rubber packing , glazing clips etc. and as peg stays 150 mm long (1 nos), hinges type B21, 100 mm long (2 nos) suitable handle (1 no) complete all as specified and as directed

S& F as in repairs Door closer hydraulically regulated,designation No. 3,universal type, Aluminium extruded section body suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F as in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm complete all as specified and as directed

S&F in repairs Aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm complete all as specified and as directed

S & F in repairs 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S & F in repairs aluminium butt hinges, extruded brass, with mild steel hinge pin, bright polished, type B-21 complete all as specified and as directed

S&F in repairs Mortice latch with two levers (vertical type), but of brass body and fixed 100 mm complete all as specified and as directed

S & F in repairs sheet glass or-dinary quality and glazing with aluminium beading in square exc 0.5 sq . In each pane, 5.5 mm thick etc. complete all as specified and as directed

S&F in repairs 12mm thick prelaminated particleboard, interior grade,prelaminated oneside with decorativechoice lamination &other side balancingwhite lamination,fixed with screws to complete all as specified and as directed

S & F in repairs anodised aluminium grills for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S & F in repairs brass chromium plated towel rail 600mm long brass chromium plated complete all as specified and as directed .

S & F in repairs plastic water closet seat cover white clsoed pattern with flat bottom and cover and mild steel chromium plated hing divice complete all as specified and as directed .

S & F in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed ( make Prayag or equivalant) complete all as specified and as directed .

sai construction

M/S M.N.Reddy

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

ASHOK CONSTRUCTION