Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹11.1 LAccepted-AOC | ₹11.1 L | 1 | Accepted-AOC Lowest Bid Price |
| 2 | 2₹11.1 L−₹446 (0.04%)Rejected-Finance | ₹11.1 L−₹446 (0.04%) | 2 | Rejected-Finance 1114550 |
| 3 | 3₹11.2 L+₹1,226 (0.11%)Rejected-Finance | ₹11.2 L+₹1,226 (0.11%) | 3 | Rejected-Finance 1115776 |
Tender Value
₹11.1 L
EMD Value
₹2,229
Closing Date
27 Jul 2026, 12:00 pmClosed
eo np dhanura
NPP DHANAURA
Interlocking tiles and drain construction work from Rupchand house to Sauran Singh house from Amit house to Hardayal Prem to Dalchand and from Ramkishor house to Ramkuwar house in Mohalla Gandhinagar Ward 10
2026_DOLBU_1169920_1
182/NPPD/E-Tender/2026-27
Open Tender
Civil Works
Percentage
90 days
NPP Dhanaura
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,314
EO DHANAURA
₹2,229
15 Sept 2026
16 Jul 2026
27 Jul 2026
16 Jul 2026
27 Jul 2026
16 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1CC Road | |||||
| 1.01 | Dismentling of old I/L road including with 5km distance all comp. | - | Nos | - | - |
| 1.02 | Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1 MORD Specific - ations 800 & 1200 Sr.
No.3.14 | 1 | Nos | 1 | ₹1 |
| 1.03 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with
motorgrader/ tractormountedappropriateequipmentonpreparedsurface,mixingbymix inplace
method with rotavator at OMC, and compacting with smooth MORD Specifications 401 | 1 | Nos | 1 | ₹1 |
| 1.04 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, a MORD Specific - ations 405.3 | 1 | Nos | - | - |
| 1.05 | 600&Brick masonry work in cement mortar in foundation complete exccpting pointing and plastering 1200 as per drawing and technical specification clauses MORD Specific - ations 600 & 1200 Sr.
No.11.5 | - | Nos | 1 | - |
| 2 | Plstering with cement mortar (1:4), 12 mm thick on brick work in substructure as per technical specification Clauses 613.4 and 1204 MORD Specific - ations 600 & 1200 Sr.
No.12.3 | 1 | Nos | - | - |
| 3Construction of un-reinforced plain cement concrete pavement, 15 cm thickness as per design over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 Grade coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side frame work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the framework as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continious operation including provision of contraction and expansion, construction joints by providing 12mm thick dura board at the specified spacing, applying debonding strips primer, sealant near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 but including cost of polythene sheet. | |||||
| 4RCC work with approved coarse sand and 2 cm guage approved stone grit in 1:1.5:3 in lintels of doors, windows and sunsheds excluding supply of reinforcement and its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc required for proper completion of work. in M-20 Grade MORD Specific - ations 800 & 1200 Sr. No.11.40 (iv) | |||||
| 5 | Mild steel or TMT Bars(Fe-500D grade or higher) or HYSD Bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel.MORD Specific - ations1000 Sr.
No.12.6 | 1 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_2195178.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .