Construction of Buildings for De-addiction cente and other multipurpose usage etc at Topkhana Bazar near Tubewell No. 02.

Amount

Dismantling Brickwork built in C. Mortar all as specified in MES SSR 2020.

Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq. m each (without taking off Shutters from the frame) complete all as sp. in MES SSR 2020.

Dismantling RCC work/R:B:C in roof, floors (other than ground floors), beams, Staircases, landing including reinforcement cut as required to facilitate demolition complete all as sp. in MES SSR 2020.

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC works.

Taking down Brick tiles alongwith mud phuska from roofs complete all as sp.

M/L of brickwork with fly ash bricks class designation 75 (Kgf/cm2) straight or curved on plan exc 6m mean radius built in cement mortor 1:4 all as specified in MES SSR 2020.

M/L execpt brick work in cement mortar 1:4 including cleaning of bricks cement mortor complete all as specified in MES SSR 2020.

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2020

M/L Vitrified Ceramic tiles light shade colour shade 10 mm thick (Square/rectangular) polished, area of each tiles not execcding 0.42 sqm, but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as sp. in MES SSR 2020.

M/L screed 15-20 mm thick in C. mortar 1:4 for laying of marble/tiles all as sp. in MES SSR 2020.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in MES SSR 2020.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2020.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2020.

M/L glazed ceramic tiles 300 mm x 200mm or 300 mm x 300 mm x 7 mm thick etc. on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR,2020 ( colored tiles).

S/F 2nd class Hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2020.

S/F 2nd class Hard wood, plain framed, panelled factory made shutters (Two panel) with lock rail and panel of 20 mm B.W.P. commercial ply or 40 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I ) kiln seasoned and chemically pressure treated all as specified in MES SSR,2020.

S/F of 2nd class Hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters all as specified in MES SSR,2020.

S/F Aluminium Frame (color coated) Made of Aluminium rectangular section of 1.3 mm Thickness of size 2 ½” x 1 ½” Complete including fixing of 5 mm thick Glass Black/Brown for widows, doors & partly fixed partly openable frame, including hinges door closer, handle etc. complete all as specified in MES SSR 2020.

S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in MES SSR, 2020.

Putty filling two coats application of one coat of Primer followed by two coats of premium Acrylic emulsion such as Asian/Nerolac/Berger or equivalent followed by preparing existing surface to smooth Interior finish all as sp.

Putty filling two coats application of one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

M/L for one light point or one fan point controlled by one switch with cables 1.5 Sqmm in size copper conductor PVC sheathed single core in PVC conduit all as sp. in MES SSR 2020.

M/l for modular switch 1 way 6A 1 module complete all as sp. in MES SSR 2020.

M/L Cement Concrete Chequered tiles 30cm x 30 cm x 22 mm with sand 20 mm thick set, jointed and pointed in neat cement slurry and screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as sp. in MES SSR 2020.

M/L Cement concrete interlocking block/tiles (M-40) Vibrator moulded, 80 mm thick of shape as per sample laid over sand 25 to 40 mm -I block or similar ISI Marks all as sp. in MES SSR 2020.

Supply and fixing of PVC rainwater pipe 110 mm dia fixed to wall complete all as sp.

Supply and fixing of bend and elbow 110 mm dia complete all as sp. in MES SSR 2020.

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on wall and Ceilings or laying in floors complete 20 mm outer dia all as specified in MES SSR 2020.

Supplying and laying of CPVC pipes SDR 11and plain CPVC SDR 11 fittings on wall and Ceilings or laying in floors complete 25 mm outer dia all as specified in MES SSR 2020.

M/L Vitreous china wash basin, white, flat back size 630 x 450 mm including brackets and waste fittings, brass CP and PVC connection 450 mm and Brass CP bottle traps for wash basin with inlet and outlet 32 mm bore dia and CP pillar tap cast copper alloy, with capstain head 15 mm complete all as specified in MES SSR 2020.

M/L for Vitreous china wash down water closet pan (Pedestal Pattern), white including PVC valveless, syphonic action type, flushing cistern capacity 10 ltrs. and PVC connection 450 mm, flush pipe of polythylene of low or high density complete all as specified in MES SSR 2020.

Supply and fixing of PVC pipe 110 mm dia laid in trenches including haunching under or over surrounding and paking against the side complete all as specified in MES SSR 2020.

Ditto but 75 mm dia pipe laid in trenches including haunching under or over surrounding and paking against the side complete all as specified in MES SSR 2020.

S/F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified in MES SSR 2020.

Description of Work / Item(s)

Amount

Recovery item : Old Door servicable after nessecary repair by contractor.

Recovery item : Old Door unservicable.

Recovery item : Old windows with Grills unservicable.

Recovery item : Old Reinforcement unserviceable.

Hitech builders (BID ID -3429935)

R N COMPANY (BID ID -3429926)

A N BUILDERS (BID ID -3430044)

R N COMPANY (BID ID -3429926)

Hitech builders (BID ID -3429935)

A N BUILDERS (BID ID -3430044)