Providing, Installation and commissioning of Air Conditioning system in the conference hall and different chambers of officials of office of the Tripura State Legal Services Authority, Agartala, West Tripura

Amount

Providing in/c testing and commissioning of Split type Hi-wall 1.50 TR (4,500 Kcal/ hr±2%) split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391(part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt ± 10%, not less than 3 (Three) Star rating(2019 standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.

Providing of Split type Hi-wall 2.00 TR (6,000 Kcal/ hr±2%) split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391(part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt ± 10%, not less than 3 (Three) Star rating(2019 standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.

Standard installation of 1.5 TR/2.00 TR capacity High Wall Split type Air Conditioner in/c repairing of drilled wall by cement morter, painting Glass cutting(if necessary) etc. in/c necessary insulation of copper pipes and also providing electrical 3 pin 16 amp top for connector in socket & necessary etc. complete as per direction of the Engineer-in-Charge.

Supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line with installation and necessary wiring between indoor and outdoor units beyond the standard length as per direction of the Engineer-in-Charge.

Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts / cradle of suitable sizes in/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-Charge.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.

Providing and connecting Electric cables in/c control cable between MCB to indoor & indoor to outdoor . 3CX 2.5 Sq. mm Copper Cable.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion single socketed pipe-110 mm OD as per direction of the Engineer-in-Charge.

STANDARD ELECTRONICS

Eastern Commerce

DHRITISHREE