Constg. of New Gram Panchayat Building cum Talati-cum- Mantri Awas At Various Villages Under CDP-5 - 2025-26 Package No. - SK/CDP-5/41, Ta. - Himatnagar Dist. - Sabarkantha

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

1 Excavation for foundation upto 1.5 M depth 222.80 122.99 Cmt

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50 M lead (A) Loose or Soft Soil

2 Excavation for foundation for depth from 1.5 78.80 136.33 Cmt

m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (A) Loose

or soft soil

3 Filling available excavated earth (excluding 249.60 136.92 Cmt

rock in trenches plinth, slides of foundations

etc. in layers not exceeding 20 cm in depth

consolidating each deposited layer by

ramming and watering)

4 Filling in foundation and plinth with murrum or 153.20 294.38 Cmt

including watering ramming and consolidating

etc. complete

5 Providing and laying cement concrete work 17.20 4046.42 Cmt

1:2:4 (M-150) (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings,

Base or columns and Mass concrete.

6 Providing and laying cement concrete 1:1:2 31.60 4827.80 Cmt

(M-250) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work in

Foundations, footings bases of columns and

the like and Mass concrete for Footing

7 Providing and laying cement concrete 1:1:2 5.20 8807.20 Cmt

(M-250) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work in

Foundations, footings bases of columns and

the like and Mass concrete for below plinth

8 Providing and laying cement concrete 1:1:2 15.60 6400.37 Cmt

(M-250) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work

for Ground Beam.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

9 Brick work using common burnt clay building 44.40 4214.33 Cmt

brick having crushing strength not less than

35 kg/sq. cm. in foundation and plinth in

cement mortar 1:6 ( 1 Cement: 6 fine sand)

(B) Convention

10 Providing and laying Cement Concrete 1:1.5:3 19.20 4690.44 Cmt

(M 200) and curing complete Including the

cost of formwork But Excluding the cost of

reinforcement for reinforced concrete work in

R.C.C. Plinth Slab.

11 Providing and laying cement concrete 1:1.5:3 12.80 8688.02 Cmt

(M 200) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work

for Column in Goround Floor (A) Ground Floor

12 Providing and laying cement concrete 1:1.5:3 11.60 8729.43 Cmt

(M 200) and curing complete including the

cost of form work but including cost of

reinforcement for reinforced concrete work

for Column in Frist Floor (B) Frist Floor

13 Providing and laying cement concrete 1:1.5:3 2.00 8770.84 Cmt

(M 200) and curing complete including the

cost of form work but including cost of

reinforcement for reinforced concrete work

for Column in Second Floor (C) Second Floor

14 Providing laying cement concrete 1:1.5:3 (M 14.80 6800.33 Cmt

200) and curing complete including the cost of

formwork but cost of form work but excluding

the cost of reinforcement of reinforced

concrete work in (C) Beams, Girders and

Cantileve for Ground Floor

15 Providing laying controlled cement concrete M 10.00 6841.74 Cmt

200 and curing complete including the cost of

formwork but cost of form work but including

the cost of reinforcement of reinforced

concrete work in (C) Beams, Girders and

Cantileve for First Floor (B) 1ST FLOOR

16 Providing and laying cement concrete 1:1.5:3 4.80 9869.72 Cmt

(M 200) and curing complete including the

cost of form work and excluding the cost of

reinforcement for reinforced concrete work in

(c) Lintel in Ground Floor

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

17 Providing and laying cement concrete 1:1.5:3 4.00 9911.13 Cmt

(M 200) and curing complete including the

cost of form work and excluding the cost of

reinforcement for reinforced concrete work in

(c) Lintel in First Floor (B) Frist Floor Lintel

18 Providing and laying cement concrete 1:1.5:3 2.40 9588.93 Cmt

(M 200) and curing complete including the

cost of form work and excluding the cost of

reinforcement for reinforced concrete work in

(c) Chajja in Ground Floor

19 Providing and laying cement concrete 1:1.5:3 2.00 9630.34 Cmt

(M 200) and curing complete including the

cost of form work and excluding the cost of

reinforcement for reinforced concrete work in

(c) Chajja in First Floor

20 Providing and laying cement concrete 1:1.5:3 48.40 7258.87 Cmt

(M 200) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work for

Slab in Ground Floor

21 Providing and laying cement concrete 1:1.5:3 29.20 9655.60 Cmt

(M 200) and curing complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work for

Slab in First Floor (B) Frist Floor Slab

22 Providing and laying cement concrete 1:1.5:3 7.60 7577.02 Cmt

(M 200) and curing complete including the

cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in

R.C.C. Stair Cases for Ground Floor

23 Providing TMT Bar FE 415 reinforcement for 22766.40 77.29 Kg.

R.C.C. work including bending, binding and

placing in position complete upto floor two

24 Brick work using hydraulically pressed 70.80 4495.98 Cmt

common burnt clay building brick having

crushing strength not less than 35 kg/sq. cm.

in super structure above plinth level up to floor

two level in cement mortar 1:6 ( 1 Cement:

fine sand) (B) Convention for G.F

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

25 Brick work using hydraulically pressed 78.00 4538.10 Cmt

common burnt clay building brick having

crushing strength not less than 35 kg/sq. cm.

in super structure above plinth level up to floor

two level in cement mortar 1:6 ( 1 Cement:

fine sand) (B) Convention for F.F

26 Brick work using hydraulically pressed 12.80 4580.22 Cmt

common burnt clay building brick having

crushing strength not less than 35 kg/sq. cm.

in super structure above plinth level up to floor

two level in cement mortar 1:6 ( 1 Cement:

fine sand) (B) Convention for S.F.

27 Half brick masonary in hydraulically pressed 114.40 750.69 Smt

common burnt clay building bricks having

crushing strenght not less than less than

kg/sq. cm. in cement Mortar 1:3 ( 1 Cement :

3 coarse sand) in superstructure above plinth

level up to floor two level Conventional (GF)

28 Half brick masonary in hydraulically pressed 56.40 757.00 Smt

common burnt clay building bricks having

crushing strenght not less than less than

kg/sq. cm. in cement Mortar 1:3 ( 1 Cement :

3 coarse sand) with 2 nos of 6mm mild steel

round bars after every three course

embedded in cement mortar in superstructure

above plinth level up to floor two level

Conventional (FF)

29 Providing and laying Machine cut, Free 182.00 2327.55 Smt

edges, Machine polished Granite stone slab

16 to 18 mm thick Single Piece For doors

and Windows Cill and Jambs Cladding as per

design including Full moulded Round front

edge and 1 cm nosing and laid on 20 mm

thick cement mortar 1:6 (1 cement : 6 coarse

sand) and jointed with gray cement slurry

including rubbing and polishing etc. complete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

30 Providing and fixing 35 mm thick shutters for 54.00 5338.30 Smt

doors, windows and clerestory windows, fully

panelled, including pressed steel door frame

conforming to IS:4351 manufactured from

commercial galvanised steel sheet of 2.5 mm

thickness conforming to IS:277 GP, including

jamb, lock jamb bead and required angle

threshold of section 50 x 25 mm, or base ties

of 20 mm x 5 mm pressed mild steel welded

or rigidly fixed together by mechanical means,

adjustable lug with split end tail to each jamb,

including butt hinges 100 mm x 58 mm x

mm with mortar guards, lock strike-plate and

shock absorbers as specified, and applying a

coat of approved steel primer and two coats

of enamel paint after pre-treatment of the

surface, including black enamelled iron

oxidised fixtures and fastenings, primer coat

of approved quality and two coats of oil

painting etc., complete.

31 Providing and fixing colour anodised 19.20 2019.98 Smt

single/doble shutters having standard

extruded alluminium colour anodized hollow

sections frame Equvalent to Jindal Door

section No.19552 of size 38 mm x 63.5 mm

(aproximate wt. 1.2 kg per Rmt) with wooden

inserts for Durable grip of door hinges. with

mm th. glass solid core finished with 1 mm

Lamination on Both side with S.S Handle &

other Fixtures . complete

32 Providing and fixing window having extruded 58.80 1583.95 Smt

aluminum Colour anodized section horizontal

Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal

Section no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per

details etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

33 Providing and fixing standared extruded of 4.40 1175.55 Smt

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt.

Kg/mt) with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

34 Providing 15mm thick cement plaster in single 1757.60 215.85 Smt

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand) and

Extra add for finishing with a floating coat of

neat cement slurry with all lead and lift.

35 Providing 20 mm thick gutka Finished cement 937.20 284.33 Smt

plaster on exterior brick / concrete work for

plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing

and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc.

36 P & L 24" x 24"/or as required vitrified 8 mm 510.80 1346.35 Smt

thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and jointed

with color cement slurry including finised with

flush pointing & cleaning the surface etc.

complete for DARK shade/light shade.

37 P & L 24" x 24" vitrified/or as required 8 mm 28.00 1467.72 Smt

thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and jointed

with color cement slurry including finised with

flush pointing & cleaning the surface etc.

complete for antiskid.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

38 Constructing Sandwitch Platform of 18 mm 7.20 4424.81 Smt

OR 16mm thick Polished Black Granite at top

and 25 mm thick Kota stone slab using

cement mortar 1:3 for sandwitch and fitting at

Bottom and edgeswith water proof regid

adhesives including making necessary

grooves in wall with Vertical Kota stone

mm x 2 No. sandwitch thick every 60 cm

center to center including all labour material of

approved quality including full moulded round

front edge fixed in wall for partition and

jointed with grey cement slurry including

rubbing and polishing etc. complate.

39 Providing and fixing M.S. grills of required 824.40 106.29 Kg.

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and frame

alround, square or round bars with round

headed bolts and nuts or by screws including

cleaning brushing, two coats of primer, two

coats of oil paint etc complete. (A) Plain Grill.

40 Providing and laying broken chine mosaic 252.80 779.70 Smt

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

41 Providing & laying and jointing in true line and 40.00 148.12 Rmt

level 40 mm dia UPVC pipe (SCH-40) line

including fitting make or equivalent as

approved by engineer in charge the pipe

shole be fixed on wall with the hel of clam at

every two mtr center to center or shall be

conseled as direct including necessesary

fitting etc including testing of pipe and jointes

and fixin the sam with adhesive solvent

including cost of matarial (A) 40 mm OD pipe

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

42 Providing & laying and jointing in true line and 56.00 91.84 Rmt

level 25 mm dia UPVC pipe (SCH-40) line

including fitting make or equivalent as

approved by engineer in charge the pipe

shole be fixed on wall with the hel of clam at

every two mtr center to center or shall be

conseled as direct including necessesary

fitting etc including testing of pipe and jointes

and fixin the sam with adhesive solvent

including cost of matarial (A) 25 mm OD pipe

43 Providing & laying and jointing in true line and 68.00 72.65 Rmt

level 15 mm dia UPVC pipe (SCH-40) line

including fitting make or equivalent as

approved by engineer in charge the pipe

shole be fixed on wall with the hel of clam at

every two mtr center to center or shall be

conseled as direct including necessesary

fitting etc including testing of pipe and jointes

and fixin the sam with adhesive solvent

including cost of matarial (A) 15 mm OD pipe

44 Providing and fixing Wash down Water closet 8.00 4683.47 No.

wall hung type W.C. pan with integral P or S

trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand)

(A) Viterous china pattern - I (i)in white colour

With Providing and fixing 12.5 litres low level

flushing cistern with a pair of C.I. or mild

brackets complete with fittings such as lead

value less syphon 15 mm nominal size brass

ball valve with polythene float C.P. brass

handle unions and couplings for connection

with inlet, outlet and overflow pipes. 40 mm

dia porcelain enamelled flush bend including

cutting holes in walls and making good the

same conecting the flush bend with cistren

and closed Providing and fixing plastic seat

and cover for wash down water closet with

C.P. brass hinges and rubber buffers

Providing and fixing toilet paper holder (A)

C.P. brass.Providing and fixing screw down

bib taps of follwing size (B) Brass chromium

plated screw down bib tap(i) 15 mm dia

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

45 Providing and fixing wash basin Table TOp 8.00 1519.50 No.

with wall mounted tap with C.L. or M.S.

brackets painted white including cutting holes

and making good the same including piller tap

brass waste, stopckok and MI fisher union

fitting waste pipe:(ii) flat back wash basin

500mm x 400mm size including all nesessary

46 Providing and fixing SS Kitchen sink including 4.00 2326.66 No.

cutting holes in walls OR GRANITE and

making good the same And Required Size etc

47 Providing and fixing screw down bib taps of 16.00 186.83 No.

following size of jaquar brand product as

approved by engineer in charge (I) 15 mm

48 Providing and fixing SWR nanhi trap of the 8.00 634.17 No.

following nominal dia of self cleaning design

with C L screwed down of hinged grating

including cost of cutting and making good the

walls floos 100 mm inlet and 50 mm out let

etc complete

49 Providing and fixing S.W. gully trap with C.I. 8.00 1246.92 No.

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size

P or R type

50 Providing and fixing brass screw down stop 16.00 220.82 No.

tap.(C) 25mm dia.

51 Providing and fixing UPVC spigot and socket 8.00 741.01 No.

soil, waste and ventilating pipes of the

following nominal size. (B) 75mm dia.

52 Providing and fixing UPVC spigot and socket 8.00 892.39 No.

soil, waste and ventilating pipes of the

following nominal size. (B) 100mm dia.

53 Providing and fixing to wall ceiling and floor 20.00 339.05 Rmt

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

54 Providing and fixing to wall ceiling and floor 32.00 280.23 Rmt

10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(F) 75mm

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

55 Constructing brick masonry chamber for 4.00 3660.76 No.

underground C.I. Inspection chamber and

bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or

two inlets.

56 providing and fixing in position cowl vent to 12.00 505.17 No.

pipe (II) 100mm

57 Providing and fixing G.I. Rain water spout of 99.20 101.91 Rmt

50mm dia. and 30cm. length.

58 Applying two coats of Birla or Asian acrylic 1757.60 123.56 Smt

lappy (putty) and two coats of primer & Wall

painting ( two coats) with plastic emulsion

paint of approved brand and manufacture on

wall surfaces to give an even brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

59 Finishing wall with weather proof exterior 937.20 73.75 Smt

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

60 Constructing Brick masonry road gully 8.00 2017.19 No.

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal

grating wih frame complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

61 Constructing brick masonry chamber for 4.00 43756.23 No.

underground chamber (Kharkuva) with bricks

having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 with (R.C.C. top slab with

1:2:4 mix including Beams (1-cement : 2-

coarse sand : 4-graded stone aggregate

20mm size) foundation concrete 1 : 4 :

inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 2.00 mt. dia x

2.5 mt deep = 7.85 Cu.mt. for pipe line with

one or two inlets.

62 Providing erecting and fixing double coated 4000.00 3.95 Ltr.

Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

63 Dismentaling of Existing Building (flooring, 4.00 15150.00 No.

Brick masonary, RCC roofing , Plumbing Etc.)

including stacking of serviceable material and

disposal of unserviceable material with all

lead and lift.

64 Providing and fixing pre-cast Rubber Dye / 76.32 706.93 Smt

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

65 Providing and fixing pre-cast concrete kerb 127.20 374.92 Rmt

stone of gray cement based concrete block

30cm length, 30cm height and 15cm thick of

M250 grade concret as per approved design

and including excavation for fixing in proper

line and level, filling the joint with C:M 1:3

(1cement: 3fine sand) etc complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

66 Point wiring for Light / Bell with 2-1.5 sq.mm 108.00 485.81 Pt.

& earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular

type switch / bell push & accessories and

earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete.Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

67 Point wiring for FAN with 2-1.5 sq.mm & 44.00 674.68 Pt.

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME

step type electronic fan regulator mounted

and accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed..(f)

with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete.Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

68 Point wiring for Individual Plug with & earth 36.00 510.05 Pt.

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

69 Point wiring for on board Looped Plug with 6A 40.00 257.55 Pt.

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected on

/ in wall / ceiling with following type

accessories.Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

70 Providing following type of Modular Type 8.00 160.59 Ea

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III

(Make:- Honeywell, L&T, Havells, Indoasian,

71 Providing following type of Modular Type 40.00 25.25 Ea

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single

Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

72 Providing following type of Modular Type 28.00 180.79 Ea

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way

switch Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

73 Providing following type of Modular Type 28.00 199.98 Ea

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (10) 6/16Amp. Universal

socket Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

74 Providing and erecting ISI mark Medium class 280.00 33.33 Mtr.

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with

following dia of pipes, in approved manner as

directed (b) 25 mm

75 Providing & erecting PVC Corrugated Flexible 40.00 21.21 Mtr.

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes. (2) 25 mm

76 Providing and erecting Mains with 1.1 KV 1020.00 62.62 Mtr.

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (A) with medium

class Rigid PVC pipe and accessories (A)

wire 1.5 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

77 Providing and erecting Mains with 1.1 KV 164.00 112.11 Mtr.

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for

earth continuity of following size (A) with

medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (Make: - RR

Kabel, Havells, Avocab, KEI, Johnson)

78 Supplying and erecting Flexible PVC insulated 76.00 46.46 Mtr.

multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be

erected as directed. e) 1.50 Sq.mm 3 core

round PVC sheathed

79 Supplying & erecting approved make 200.00 20.20 Mtr.

Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, &

wrapped with FRLS PVC tape & sheathed

with FRLS PVC or HFFR outer Jacket suitable

for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

Unarmoured 2) Two Pairs

80 Providing & erecting Switch board for 16.00 1133.22 Ea

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box with

single mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories. Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

81 Decorative call bell Ting-tong box type 250 8.00 71.71 Ea

volts complete erected

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

82 Supplying and erecting LED indoor fittings 72.00 373.70 Ea

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED LED driver efficiency >

% ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

wattage capacity between the ranges shown.)

(A) Tube Light with integral/ non-integral

driver . (iv) 22-24 Watts, Surge - 2KV, IP-20,

conventional 4 feet Cat III (Make:- Wipro,

LT, Philiphs, Havells, Jaquar)

83 Supplying and erecting led lamps with 12.00 112.11 Ea

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP

holder (i) 5 to 8 watts Cat-III (Make:- Wipro,

LT, Philiphs, Havells, Jaquar)

84 Providing and erecting Miniature circuit 32.00 112.11 Ea

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark Cat-III (Make:- Indoasian, L&T (LK),

ABB, Schneider)

85 Providing & erecting 240 V MCB double pole 8.00 295.93 Ea

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity (B)

40 Amp. Cat-III (Make:- Indoasian, L&T (LK),

ABB, Schneider)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

86 Providing and erecting Sheet Steel powder 4.00 1492.78 Ea

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for (A) single phase

incoming and horizontal single phase

outgoing (b) sheet steel double door (iV)12

way (Make:- Indoasian, L&T (LK), ABB,

Schneider)

87 Providing and erecting Approved make 4.00 2235.13 Ea

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max.

rating erected as directed (iI) 40 Amps. DP

Cat. III (Make:- Indoasian, L&T (LK), ABB,

Schneider)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

88 Supplying & erecting earth pit of minimum 4.00 4591.46 Ea

bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded

by highly conductive compound with high

charge dissipation suitable for following type

of applications with chamber and heavy duty

cover. (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to

retain moisture for long time Necessary test

report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

89 Providing and erecting Approved make 32.00 1596.81 Ea

Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be

approved by Engineer in charge] (Make:-

Crompton, Havells, Orient)

90 Supplying and erecting 19 / 20 mm. nominal 32.00 108.07 Mtr.

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leckage and

91 Supplying & erecting fan hook box of 10 mm 32.00 108.07 Ea

M.S. round bar bounded to the RCC bars up

to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in

Ceiling with necessary finishing.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

92 Providing & erecting open well type horizontal 4.00 9613.18 Ea

mono block pump set with stainless steel

body having following specification (C) 1 H.P.

single phase open well motor pump set

suitable for 185 LPM discharge @ 25 mtr.

head, suitable for 32 mm dia. Delivery pipe

with control panel.Cat. II

Total Rs.

Rupees EightyThree Lakh FiftyNine Thousand TwentyOne and Paisa ThirtySeven Only

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of

my/our tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% Above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. 42000.00 must be recovered from

Contractor's respective R.A. Bill.

Signeture of Contractor

Dy. Executive Engineer Executive Engineer

Panchayat R.&B. Sub Division Panchayat R.&B. Division

Himatnagar Himatnagar