Repairs to various Snow Machines viz. Snow Cat 20 (Preet), Snow Cat 90 HP (Sonalika), Snow Cat 31 (Farmtrac 90 HP), Snow Cat 15 (Farmtrac) and Snow Machine 59 (LPT 715) of Mechanical and Hospital Sub-Division 1st Anantnag.

Repairs to blade assembly by way of dismantling the blade assy. from the machine then cutting of the rear horizontal support brackets 02 no.’s of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8” and replacing the vertical support channels 02 no’s by ISMC 100 L-1000mm 02 No.’s by way of cutting and welding. The job also includes providing and welding of 04 no’s gusset plates of size 250x160mm between the vertical and horizontal support brackets. Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade. It also includes the filling of cracks and recesses throughout the whole blade by filler material. The job also includes P/F of nuts and bolts of required size wherever required and includes primer coating along with required paint (two coats) on the exposed/welded surface of the blade. SNOW CAT 20 (PREET), SNOW CAT 90 HP (SONALIKA), SNOW CAT – 31 FARMTRAC 90HP & SNOW CAT –15

Providing & Fitting of the complete tie rod assembly, the job including dismantling of the defective tie rod assembly, removal of worn tie-rod ends/ball joints, supply and installation of new tie rod assembly (01 No.) replacement of tie-rod end/ball joint set (02 Nos.) castellated nuts, split pins and allied fastening items, grease and including GST. The work shall include proper tightening, greasing, checking of steering play and road/operational testing after replacement SNOW CAT 90 HP (SONALIKA

Repairing to the wiper electric motor this job includes wiper motor repair/servicing with carbon brush, bearing/bush and internal electrical components as required along with repairs to wiper linkage/connecting rod bushes and clips it also includes removal, inspection, servicing and refitting of the wiper motor assembly, wiring, terminals and allied electrical consumables. SNOW CAT 15 HP (Farmtac)

Dismantling of Damaged Wiper Motor Assembly from 90HP Farmtac (S/C 31) and replacing the same with a fresh wiper motor assembly (JCB Type). The job needs to be carried out because the existing motor wiper assembly (turning faulty off and on during clearance operations) is incapable in removing snow-off the wind shield during snow fall. The Job also includes replacing of arms/blades of suitable length which can swing and swept all along the wind shield.

Providing And Fixing Of 3" Thick Foam on The Inside of Seat Covers Which Includes Cutting and Sizing as Per Requirement for Cushion Purpose and Then Providing and Fitting of Seat Covers to Be Fabricated Out of Synthetic Leather Material for Driver Seat of Required Dimension. The Job Also Includes Cutting Sizing and Stitching of Synthetic Leather Material as Per Size Requirements. SNOW CAT –15

Providing and Fitting of new horn Set. LPT-59 (715).

Providing and Fitting of Pre- Cleaner entire assembly (bowl type) for SC 15 Farmtac (60 HP).

Providing and fitting of Cabin Glass 5mm thick (fiber) of size 2x2 feet. The job also includes providing and fitting of rubber beading of required size for LPT 715 (MC 59).

Dismantling, troubleshooting, rectifying, testing and recommissioning of cabin heating unit, including flushing of heater matrix, flushing of pipes & valves, testing electrical continuity, and restoring nominal thermal regulation inside the operator cabin and check for clogged air filters for snow cat Preet 20.

Repairs to Radiator by way of dismantling the radiator from the machine and then shifting the damaged radiator from site at Vailoo to local market for repairs by way of thoroughly washing with caustic soda and then brazing the leaking fins and joints and testing thereof for Snow Cat 15