Submersible motor

Supply and Transportation of 1.00HP 25 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work Makes: Kirlosaker/comption/Texmo/CRI/KSB/Lubi/P&G /ARYEN/Falcon/Prith.

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Supply and delivery of .60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts. for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work Makes: Ashirvad / Finolex / Waterflo /Sudhakar/Precision

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work

Supply of 3 core, 4.0 Sq mm.ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. This rate incluiding cost of all materials all labour charges, transporation charges other incidental charge etc complete as per IE Rules and as directed by the departmental officer incharge of work. Makes: Makes: V-Guard/Bonton/ HPL / Tamra/ /Plaza/ Vihan/Spykaar/ Ollvin /Laser /Beljin /Rhino/ Standard/ Vimal/DEC/Unistar/Fybros/A-Flex//LS cable/ Foursun/Vimcab/Nakoda/Salzar/Vijaya /South king/Millicab/Vasura/Vasavi/AJUSS