REPAIR TO JOINERY AT NORTH OF RAILWAY LINE UNDER GE MISAMARI

Amount

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each.

Taking down shutter of any description n.exc 1 Sqm each complete all as specified and directed.

Refixing of shutter of any description in same opening not exc 1 Sqm each.complete all as specified and directed

Refixing of shutter of any description in same opening exc 1 Sqm and n.exc 2 Sqm each.complete all as specified and directed

Easing of door / window shutter n.exc 1.00 sq m in size without taking down and making operational in all respects complete all as directed.

Easing of door / window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operational in all respects complete all as directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for framed work as in doors or gates of angle iron and MS flat welded thoroughly for jointing angles or other sections, drilled or welded as required and fixing at site with and incl PCC 1:3:6 as bed block for holdfast etc including preparation of steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified/directed

M&L in repairs mild steel as in hold fast, hooks for hanging fans and similar small articles complete all as specified.

S & F 35 mm thick 2nd class HW glazed and Skelton door shutter, open rebated and prepared to receive glass, gauze, etc but divided into square, with plain chamfered or rounded mitered and rebated sash bars any numbers as specified in SSR Pt-I, Sec-8, clause 8.24(a) complete all as specified/directed

S & F 30 mm thick 2nd class HW glazed and and Skelton shutter, open rebated and prepared to receive glass, gauze, etc but divided into square, with plain chamfered or rounded mitered and rebated sash bars any numbers as in windows,ventilators etc are provided with stiles and rails as specified in SSR Pt-I, Sec-8, clause 8.24(b) complete all as specified

S & F plain framed paneled shutter (2nd class H.W). 35mm thick (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial faces veneers.

S&F 30mm thick flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side.

S&F factory made steel window with double shutter (glazed and mosquito proof shutter of stainless steel wire mesh) with side/top hung shutter with projecting type hinges, steel handle steel peg stay with complete (Stainless steel wire mesh will be measured and paid separately).

S & F Mild steel framed work as in grill , grating and guard bars etc. complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including taking down of existing unserviceable door and frames complete all as specified and directed.

S&F Solid PVC Door Frame of size 100mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing ®

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc, complet all as specified and directed.

S&F anodised aluminium door shutters(single/double shutter), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws, hold fast complete all as specified and directed. Note :- (i) Fixing of shutter with all fittings shall be as per manufactures instruction. (ii) Rate quoted is deemed to be inclusive of aluminium hardware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frame, handles, locking arrangment but glass panes in frame shall be measured and paid separately under respective Sch A items separately at supply only rates.

S&F anodised aluminium window/venilator shutter sliding type glazed and gauzed (Combination type) with aluminium deco pattern grils, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws, hold fast complete all as specified and directed. Note :- (i) Fixing of shutter with all fittings shall be as per manufactures instruction. (ii) Rate quoted is deemed to be inclusive of aluminium hardware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frame, handles, locking arrangment but glass panes in frame shall be measured and paid separately under respective Sch A items separately at supply only rates.

S&F 250 mm long Mild steel sliding door bolt, stove enamellrd black with bright bolt not less than 12 mm dia with & incl minimum 6 bols & nuts 4 on bolt plate & 2 on staple plate .

S&F 140mm Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F 100mm size butt hinges cold rolled Stainless steel medium weight, ISI marked complete all as specified and directed.

S & F 75 mm size butt hinges cold rolled Stainless steel medium weight, ISI marked complete all as specified and directed.

S&F aluminium handles cast type anodised size 150 mm long.

-Ditto- all as per item No.25 above but 100mm size

S&F aluminium anodiesed barrel tower bolt of extruded section size 150 mm long .

S&F aluminium anodiesed barrel tower bolt of extruded section size 100 mm long .

S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S & F sheet glass, tinted, 3 mm thick, glazing in aluminium frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

S & F frosted glass, 3 mm thick, glazing in aluminium frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

Welding in repair exc 2.5cm but n.exc 5cm in length

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads etc complete.

S&F in repair Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F repair stainless steel wire cloth 0.36 mm nominal dia of wire and average with of aperture 1.40mm

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average with of aperture 1.40mm

M&L Preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer

M &L preparation of new or previously untreated surfaces steel surface and apply two coat of synthetic enamel paint over a coat of red oxide primer all as directed.

S&F Harrison rails, mild steel, chromium plated or PVC coated with fixing brackets, stops, rollers etc PVC coated curtain rod 20 to 25 mm dia with 6 ring per RM, knobs including PVC hooks and holding brackets complete in repair complete all as specified & directed. complete all as specified and directed.

S&F 18mm thick prelaminated(both sides) colour PVC board for cup board incl frame & fixed at site including PVC beading half round decorative type including hasps, stapples, continuous piano hinges,40 mm MS coated cup board knobs etc all as required complete all as specified and directed(Density of board not less than 600 Kg/Cum)

S&F magnetic PVC catcher for kitchen cup board complete.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as spd

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of MS polished.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

M&L glazed ceramic coloured tiles (300/450x7mm/ 300x600x7mm) thick as in vertical surfaces including 10 mm thick rendering in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even & smooth including taking down of existing plaster complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, with and finished even & smooth , without using extra cement incl mixing of WPC, incl taking down of existing plaster complete all as specified & directed.

M & L preparation of new/old surface and applying two coats of oil bound distemper on newly plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified & directed.

M & L preparation of new/old surface and applying two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified & directed.

S & F in repairs door closer hydraulically regulated designation no. 1 universal type , suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed

S&F in repair butt hinges 100mm long medium weight cold rolled mild steel and fixed.

S&F in repair mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt and fixed complete all as specified

M & L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified & directed.

Repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by necessary joining cleat/ glazing clips/ rubber neoprene /packing handles 2 Nos in each doors/ hinges/ anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass complete all as specified.

Repairs to Aluminium doors n exc 1.50 Sqm by necessary joining cleat/ glazing clips/ rubber neoprene /packing handles 2 Nos in each doors/ hinges/ anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass complete all as specified.

Sunrise Enterprise

M/S RANA ENGINEERING ENTERPRISE

Markson