PERIODICAL SERVICES WELCOME MAINTENANCE TO MD ACCN BLDGS AND BOUNDARY WALL DWARF WALL IN DERA COMPLEX VARSHA AND VARUNA APARTMENTS AT SATELITE AREA UNDER GENW KOCHI

Amount

M&L for preparing old decorated plastered surfaces of wall and applying one coat of white wash upto and incl 4th storey complete all as specified and directed.

All as per Item No 1 above but from Vth to VIII the storey

All as per Item No 1 above but from IX to XII th storey

M& L for preparation of old decorated plastered or un plastered surfaces of ceiling and applying one coat of white wash upto and including 4th storey complete all as specified and directed.

All as per Item No 4 above but from Vth to VIII storey

All as per item No 4 above but from IX to XII th storey

All as per item No 4 above but XII th storey and above

M&L for preparation by washing, rubbing down and stopping of old distempered and painted wall surfaces and applying one coat of acrylic washable distemper upto and incl 4th storey complete all as specified and as directed.

All as per item No 8 above but from Vth to VIII storey

All as per item No 8 above but from IX to XII storey

All as per item No 8 above but from XIII storey and above

M&L for preparation by washing ,rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of acrylic washable distemper any storey complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint upto and including IV th storey all as specified and as directed.

All as per item No 13 above but from Vth to VIIIth storey

All as per item No 13 above but from IX th to XIIth storey

All as per item No 13 above but from XIII th storey and above

M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint upto and including IV th storey all as specified and as directed.

All as per item No 17 above but fromVth to VIII storey

All as per item No 17 above but from IX th storey and above

M&L for complete removal of existing treatment of wall and applying two coats of acrylic washable distemper over and incl a coat of primer as preparatory to receive distempering upto and incl 4th storey complete all as directed.

All as per item No 20 above but from Vth to VIIIth storey

All as per item No 20 above but from IX th to XII th storey

All as per item No 20 above but XIII storey and above

M&L for preparation by washing rubbing down and stopping of old treated surfaces of wall and applying one coat of cement base paint white/tinted in any storey/ in any position complete all as specified and directed

M&L for preparation of old treated wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic varnish complete all as specified and directed

M&L for writing letters or figurers (Block Roman, Italic, or Indian) n exc 30cm height complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for glazed ceramic coloured designed straight edge tiles 7mm thick area of tiles exc 0.06 Sqm and n exc 0.18 Sqm on vertical surfaces such as skirting or dados laid over and incl cement mortar backing coat 10mm thick in CM 1:3, set and jointed with neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors laid over and incl cement mortar screed 10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed..

S&F vitrified tiles light shade polished, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and as directed..

S&F vitrified tiles light shade polished, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sqm, in vertical surfaces as in dado, skirting including provn of 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed..

Demolition of brick work/ stone /boulders built in cement mortar including all quoins, arches , pillars etc. complete all as specified and as directed.

M&L pre cast cement concrete block masonry 1:3:6 Type C1 with solid blocks exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan pedestal pattern (EWC), any colour complete all as specified and as directed.

S & F in repairs Plastic seat cover, any colour closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc. including fixing bolts complete all as specified and as directed..

S & F in repirs PVC valveless, syphonic action type, flushing cistern, low level, any colour, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and as directed..

S & F in repairs PVC connection 15mm bore 45cm long with brass coupling complete all as specified and as directed.

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc. incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified and as directed..

S&F in repairs 125 mm dia stainless steel grating complete all as specified and as directed.

S&F in repairs Brass Chromium plated waste coupling for WHB/ sink 32 mm dia complete all as specified and as directed.

S&F in repairs 32 mm dia and 90 cm long size PVC waste pipe with cup head for Wash Hand Basin complete all as specified and as directed..

M&L in repars PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and as directed..

S&F stainless steel sink with draining board made out of 1.0mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm complete all as specified and as directed..

S F Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed in repairs.

S&F CP tubular towel rail 20mm dia , 600mm long all as specified as in repair.(Brass chromium plated) complete all as specified and as directed.

S&F in repairs CP health faucet including flexible pipe and fittings all as directed

S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm . Make:- L&K code No 0327 or equivalent of make Jem/Soma/Parko

S&F in repair Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete. Make : L&K Cat No 0077 or equivalent makes as approved.

S&F in repair Bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, fixed in repairs complete. Make : L&K Cat No 0057 or equivalent in specified makes as approved.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repair complete. Make : L&K Cat No 0047 or equivalent makes as approved

M&L in repairs Chromium plated brass shower rose100 mm dia with swivel joints, fixed in repairs complete.

MS stainless steel end brackets for certain rods 25mm dia fixed with screws to pelmet boxes fixed in repairs complete.

25 mm dia stainless steel curtain rods supply only fixed in repairs complete.

M&L for cutting grinding of terrazzo tiles or kota stone floor etc. with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc. complete all as specified and as directed.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters,etc incl all fittings

M&L for PVC(SWR) junctions(single T) equal or unequal to fit 110mm bore PVC pipes etc. complete. Mak

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints laid in floors 110mm bore.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore.

S&F PVC(SWR) bends any radius to fit to 110mm bore pipe with access door.

S&F PVC(SWR) bends any radius to fit 75mm bore pipe with access door.

M&L cover fillets of 3mm thick standard hard board 20mm thick fixing with screws

M&L PVC(SWR) branch piece, single (Single Y ) equal or unequal 75mm bore

M&L PVC(SWR) branch piece, single (Single Y ) equal or unequal 110mm bore

M&L PVC (SWR) junction single, (Single T ) equal or unequal 75mm bore

M&L PVC (SWR) junction single, (Single T ) equal or unequal 110mm bore

Taking down chowkats area n.exc 1.5Sqm with shutters (without taking off shutters from the frames)

Taking down chowkats area exc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames) complete.

Taking down shutters of any description area n.exc 1 Sqm each complete.

Taking down shutters of any description area exc 1 Sqm but n.exc 2 Sqm each

M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M&L 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

M&L 2nd class HW 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (B); supplied and fitted to chowkats.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm including re-securing or easing and adjusting in same opening.

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F in repair for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing(Make-Festel/Polycast)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board(stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing(Make-Festel/Polycast)

M&L for repair to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot,repairs to lock, handle, rubber beadings etc. all as directed

M&L for repair to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot,repairs to lock, handle, rubber beadings etc. all as directed

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, Aluminium(Die cast) body. (Make: Everite/Universal/Dyana)

M&L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing holdfast including necessary form work

S&F MS holdfast made out of FI 25x3mm complete all as specified and as directed.

S&F in repairs 200mm long Aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F in repairs 100mm long Aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F in repairs 200mm long Aluminium anodised sliding bolt complete all as specified and as directed.

S&F in repairs 125mm long Alum anodised handle complete all as specified and as directed.

S&F in repairs 100 mm long Alum anodised handle complete all as specified and as directed.

S&F in repairs 100mm stainless steel butt hinges complete all as specified and as directed.

S&F in repairs 75mm stainless steel butt hinges complete all as specified and as directed.

S&F Continuous (Piano hinges 30 cm width of flaps) MS, bright finish or electrogalvanized

S&F in repairs 375mm mild steel, ordinary rat tail pattern springs including roller and plate complete

S&F in repairs mortice lock vertical type, size 75mm 2 levers brass complete all as specified and as directed.

S&F repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer of brass polished

S&F hasp and staple 100mm, safety type aluminium anodised within hinges incl bolt to hinges plate and fixed with screws

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 140mm

S&F in repair PVC flush valves syphon set complete internal for flush tank 10 Litres capacity push button for single layer for PVC flush.

Taking down cement plastered on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:4) and wick @3% by weight finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for Liquid water proofing compound complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of ceiling including cornices and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls including cornices and applying two coat of cement base paint over a coat of suitable primer complete all as specified and as directed by Engr-in-Charge.

Removal of vegetation /shrubs on inaccessible roofs or protections etc. and spraying of acid of required qty complete from any location of building and making good disturbed surfaces with cement mortar 1:4 or cement concrete 1:3:6 type C1 , using 20mm graded aggregate including necessary scaffolding complete all as specified and as directed.

Repair to shutters without taking down of any description not exceeding 1.0 Sqm including re-securing or easing and adjusting in same opening.

S&F in repair 2nd class hard wood, small fittings such as brackets of any type latch and hinge blocks, shaped door and windows stops and the like including all necessary labours articles not exceeding 200 CUcm each.

S&F in repairs 18/19 mm thick MDF board, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work / door shutters etc. complete all as specified and as directed .

S&F in repairs 12 mm thick MDF board , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete.

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engr -in-charge.

M&L for Rehabilitation for minor cracks in following 05 stages:- (i) Removing cover concrete portion in the structural elements carefully with mechanical arrangements and hand chiselling, clean the loose dust and clean the reinforcement (ii) Applying anticorrosive coating Nitrozinc primer manufactured by M/s Fosroc Chemicals or equivalent, including providing sacrificial Zinc anode Galvashield XPI before application. (iii) Applying epoxy based bond coat Nitrobond EP manufactured by M/s Fosroc or equivalent as per manufactures instruction (iv) Preparation of Polymer modified mortar by mixing 3 litres of Nitrobond SBR manufactured by M/s Fosroc chemicals or equivalent as per manufactures instruction per bag of cement in cement and sand mortar 1:3 and rendering with trowel . (v) Membrane curing by 'Concure' manufactured by M/s Fosroc chemicals or equivalent up to 4th storey

M&L for Micro concreting in RCC columns and Beams including chemicals, reinforcement, form work averaging thickness not exceeding 100 mm as in following stages ( Upto 4th storey) :- (i) Support the slab and beam which is contributing the load for the column under rehabilitation. (ii) Remove the damaged concrete portions completely (till the reinforcement is exposed from the member) carefully with mechanical arrangements or hand chiselling and clean the dust particles. (iii) Anchoring shear connectors in the form of 'L' shaped bars of 10 mm dia HSD in to the existing concrete by drilling holes not less than 75 mm depth 12 mm dia in staggered position along the perimeter and height of member. Spacing shouldn't be less that 300 mm for all sides. Before anchoring clean the holes with Jet compressed air to remove dust particles and anchor the dowel bars serve as shear connectors with chemical resin capsules manufactured by M/S Fosroc chemicals or equivalent. (iii) Clean the reinforcement and apply Nitrozinc primer manufactured by M/S Fosroc chemicals or equivalent with providing sacrificial Zinc anode Galvashield XPI (iv) Providing leak-proof shuttering system for the jacket portion of the members and micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent( compressive strength of Micro concrete should be 45 MPa at 28 days) Note: Reinforcement shall be measured and paid in connected item separately

S&F Powder coated aluminium frame for doors/windows/ cup boards with one or more rebates including joining cleat for fixing & locking arrangement and sliding channels when required for shutter etc. complete all as specified

Dismantling boarding, any description, fixed in any position

S&F anodised aluminium cupboard shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, Locking handle in each door, hinges/rollers, anodised aluminium snap beading screws etc. including panel inserts of prelaminated MDF board interior grade both side lamination of approved make of thickness not less than 5.50mm thick all as specified

S&F 17.5mm thick solid plain PVC sheet suitably fixed as in shelves & partitions in cupboards with stainless steel screws & glue complete all as specified & directed.

S&F stainless steel plate rack of size 1.2 m X 1.00 approx. complete all as specified

M&L stainless steel auto hinges for CB/ Kitchen cabinet shutter complete all as specified

M&L 30 cm stainless steel 'C' channel slider hinges for kitchen cabinets complete all as specified

M-TECH ENGINEERS

Jack Electrolinks Private Limited

BOB ENTERPRISES

REIGN CONSTRUCTIONS

Dhanyaconstructions

mahadeva traders cotractor and suppliers