Renovation of Police choki ,construction of compound wall at sector 12 and Providing and fixing chanlink jali and ms parking shed at sector 27 Dist: Gandhinagar ( Incl.Electrificaton)

No. In Figure In Words

Dismentaling tiled or stone floors laid in mortar including stacking of

serviceable material and disposal of unserviceable material with all lead Rs. Forty Nine &

and lift. Paise Sixty One Only

2 Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work Rs. One Thousand

2.00 Cmt 1099.75 Ninety Nine & Paise

Seventy Five Only

3 Demolition and disposal of unserviceable materials with all lead and

lift.(i) Lime concrete. Rs. Six Hundred

34.00 Cmt 633.39 Thirty Three & Paise

Thirty Nine Only

4 Dismantling Sanittary fitting like wash basin, W.C. pan indian and

europion type, flushing tank etc. including staking the material with all Rs. Four Hundred

lead and lift. 9.00 Nos 421.71 Twenty One & Paise

Seventy One Only

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings Rs. Seventy Seven &

and clamps including stacking the materials with all lead and lift ( for

24.00 Rmt 77.73 Paise Seventy Three

any dia, of pipe)

6 Removing and scraping of old deteriorated plaster of any thickness from

wall/rcc member includind stacking of serviceable materials and Rs. Twenty & Paise

disposal of unserviceble from site of work with all lead and lift Thirty Five Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

7 BRICK work masonary in common brunt clay building bricks Rs. Four Thousand

having crusing strength NOt less than 35 kg./sq.cm.in cement Four Hundred Fifty

mortar 1:6 (1 cement : 6 coarse sand ) (conventional bricks for 12.00 CMT 4458.23

Eight & Paise Twenty

GROUND FLOOR)

Three Only

8 Providing and Fixing Granite Telephonic Black Colour 18 mm thick

for jambs and sills of doors & windows using neat cement slurry

laid over 20 mm average base of cement mortar 1:1(1 cement:1

Coarse Sand) and jointed with grey cement slurry including Rs. Two Thousand

racking(Tancha Work) rubbing and polishing,scaffoldings,tools 34.00 smt 2428.00 Four Hundred

and tackles,scaffolding etc. complete(with base of neat cement) as Twenty Eight Only

per direction of Engineer in charge including rounding the exposed

edges as directed.

9 Providing and laying Telephonic Black Granite 15mm to 18mm thick

STONE SLAB FLOORING over 20mm average thick base of cement

Rs. Two Thousand

mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey One Hundred Fifty

cement slurry including rubbing & polishing etc. Complete.for all floor. Eight & Paise Forty

10 Providing and laying Granite slab (18mm thick)in Riser of steps ,dado Rs. Two Thousand

and pillares laid on 10 mm thick cement mortar 1:3 (1cement : 3 coarse

Three Hundred Sixty

sand) and jointed with grey cement slurry including rubbing, mouling 26.00 Smt 2363.47

and polishing complete. Three & Paise Forty

Seven Only

11 Providing 3 Nos groove in total length of staircase Tread of size

10mm*10mm finished Smooth in Parallel line, equally spaced as Rs. Eighty Two &

per directed eingineer in charge in all types at flooring etc. comlete.

Paise Eighty Only

12 URINAL PARTITION Providing and fixing true line & slope 18mm thick

double side polished JET BLACK COLORED GRANITE STONE as a urinal

partition with machine cut edge to all sides including polishing exposed Rs. Two Thousand

edge of elevation, making necessary cutting in wall, floors or where even

3.00 Smt 2115.40 One Hundred Fifteen

required fixing the same with CM 1:2 (1 Cement : 2 Fine sand) & making

the adjoining surface as per original including curing etc. complete as & Paise Forty Only

directed by Engineer in Charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

13 Providing & laying Printed / Coloured Glazed 8mm thick

TILES in skirting, risers of steps and DADO on 10mm thick

Rs. One Thousand

cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with

white cement slurry. ( Size of Tiles shall be 600 mm x 300mm ) Four Hundred Ninety

for all Floors. Size & Shade of tiles shall be as per Approved Eight & Paise Thirty

Architecture drawing & as per direction of Engineer in Only

14 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick

tile flooring over 20 mm (average) base of cement mortar 1:6

( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive including dismentaling of Rs. One Thousand

existing flooring and material jointed with color cement slurry Four Hundred Fifty

including finished with flush pointing & cleaning the surface 27.00 Smt 1453.19

Three & Paise

etc. complete for all Floors. Size & Shade of tiles shall be as

per Approved Architecture drawing & as per direction of

Ninteen Only

Engineer in charge.

15 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick

tile flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface orfixing on existing flooring by Rs. One Thousand

adhesive including dismentaling of existing flooring and material jointed

295.00 Smt 1580.10 Five Hundred Eighty

with color cement slurry including finised with flush pointing & cleaning

the surface etc. complete for all Floors. Material shall be used as per & Paise Ten Only

approved make list by GSPHCL.

16 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick

tile Skirting riser of Step and Dedo On 10mm Thick Cement plaster Rs. One Thousand

mortar 1:3 ( 1 cement: 3 coarse sand) & Jointed with Colour Cement Three Hundred

Slury including finised with flush pointing & cleaning the surface etc. Seventy One & Paise

complete for all Floors. Material shall be used as per approved make list

Thirty Only

by GSPHCL.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

17 Provinding and laying inegrated cement based proofing treatment of

required thickness over the roof including 10mm thick waterproofing

cement plaster in cement plaster in cement mortar1:3 and chaina mosaic

fitting and finally finishing the surfase with white cement slurry and

slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment

near rainwater outlet or the lowest point of the finishedslope shall not Rs. Nine Hundred

be less then 45mm, including treating the vertical surfaseof the parapet 260.00 Smt 912.58 Twelve & Paise Fifty

wall up to 20cms . height above finished level of terracing including Eight Only

finishing the top with joint less water proofing plaster , curing , testing

etc. complete. Rate is including ten years performance of guarantee bond

to be given on stamp paper. (No extra shall be paid for increase in

thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using

kg/sqm. of cement admixed with properly water proofing compound

conforming to IS -2645 and 10 mm thick water proofing cement plaster

in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the surface before

(B) Layign cement corcretre using broken brick bats 25mm to 40mm

size with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over

10mm thick water proofing cement plaster in cement mortar 1:3 (1

cement ,3 coarse sand) admixed with proprietary water proofing

compound conforming to IS 2645 to required slope and treating

similarly the adjoining walls up to 200mm height incl. rouding of

junction of walls.

C) After Two Days of proper curing applying a second floor of cement

(D) Finishing the surface with china mosaic pieces laid on 10mm thick

joint less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed

with proprietary water proofing compound conforming to IS :2645 and

finally finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and specified by

the Engineer In Charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

18 Provinding 15 mm thick cement PLASTER in single coat on brick or

concrete wall for interior plastering and finished even and smooth in

Rs. Two Hundred

C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating coat of 1624.00 Smt 213.51 Thirteen & Paise Fifty

neat cement slurry at GROUND FLOOR. One Only

19 Synthetic Texture Plaster with Double Coat Smooth plaster :

Providing 20mm thick cement plaster in single coat plastering upto

floor two level Outside and finished even and smooth in (i) Cement

mortar 1:3 (1-cement : 3-sand) as Base Coat and providing 2-3 mm

thick synthetic texture plaster of approved texture (Material Shall Rs. Five Hundred

be Used as Approved By GSPHCL Only ) including cost of all 280.00 Sqm 509.43 Nine & Paise Forty

materials, labour, conveyance, loading and unloading, taxes, Three Only

royalties, scaffolding, watering etc.complete for any Height as per

Drawing and instructions of Engineer -in -Charge.

20 Providing 10 mm thick cement PLASTER in single coat on ceilings for

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 Rs. Two Hundred

sand ) including finishing with a floating coat of neat cement slurry at 90.00 Smt 209.88 Nine & Paise Eighty

GROUND FLOOR. Eight Only

21 Providing and fixing solid PVC Flush Door shutter 24mm thick.

made from Co-extruded three layer rigid PVC foam sheet(single

Extruded) with density not less than 600kg/cbm outer layer (0.8-

1mm)thick should be rigid PVC with density of not less than

1400kg/cbm. Door should be water proof, Termite proof, fire Rs. Four Thousand

retardant & having good screw holding capacity(200 kgf).

Five Hundred

Providing and fixing 100% Solid Wood Plastic composite (WPC) 192.00 Sqm. 4514.20

Door Frame 90mmx45mm made from wood plastic Fourteen & Paise

composite(single Extruded Process) material with density Twenty Only

780kg/cbm. As per drawing as directed by the engineer in

charge.(Material Shall be Used as Approved By GSPHCL Only )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

22 Providing, Supplying and Fixing of 32mm (Total) Thick Flush Door Shutter

with 1mm Thick Laminates on Both Side of Shutter. Making / Construction

of Flush Door is with Pine or southern Yellow Pine Filler and 2.5mm core

veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm)

on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of

size 120mm x 65mm with Chemically Treated and Seasoned Including Paint

Matching with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi

and harmful insects also warranty against seasoning related issues like

crack, bending, twisting, warping. Laminates on shutter shall be press by

Rs. Eight Thousand

cold press method. Shutter shall be brought to site in packed PVC bags & pvc

coating shall be removed on completion of work in such a way that shutter & Nine Hundred

Frame is free from nail mark & any damages etc. Rates are also Inclusive of Seventy Six & Paise

all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No

Forty One Only

of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw &

Nails per Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No,

100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle

No, 150mm Long X 10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is to be

Obtained from Vanil Udhyog Maked Only.

23 Providing , Fabricating and fixing M.S. GRILL/GATE of approved

pattern fabricated from M.S. flat,square bars, round bars,c-channel,

square/round box pipe as per detail Drawings. Rate is inclusive of

welding with grinding smooth surface, two coats of Oil paint and Rs. Seventy Five &

one coat of yellow Zinc primer coat of approved brand only. all

Paise Eleven Only

paint & Structural Steel shall be & ISI Marke used as per Approved

Material List By G.S.P.H.C.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

24 Providing and fixing Alluminium section window having extruded

Aluminum Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x 1.30mm (of

Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm

x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Rs. One Thousand

Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 44.00 Sqm. 1902.50 Nine Hundred Two &

40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of Paise Fifty Only

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details including one

mosquitoe jali shutter With Both Side Locking Arrangment FOR ALL

25 Providing and fixing standared extruded of alluminium section of size

63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094Kg / Rmt Rs. One Thousand

with colour anodized alluminium frame with 5 mm thick transparent 18.00 Sqm. 1509.90 Five Hundred Nine &

bronze colour tinted float glass as details etc complete for Fix window

Paise Ninety Only

26 Providing and fixing to wall, ceiling and floor trenches blue threaded

C.PVC SDR-13.5 I.S.I mark of following in side dia. Tube fitting & clamps

will all required fitting such as reducing coupler, Union, band plug, end Rs. Two Hundred Six

cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using

40.00 Rmt 206.73 & Paise Seventy

bonding material. Rates are including of making good the wall ceiling &

floor etc. complete. (excavation of fearth in trenches & filling will be paid Three Only

separately where ever required (A) 20mm dia.

27 Providing and fixing to wall, ceiling and floor trenches blue threaded

C.PVC SDR-13.5 I.S.I mark of following in side dia. Tube fitting & clamps

will all required fitting such as reducing coupler, Union, band plug, end Rs. Two Hundred

cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using

40.00 Rmt 251.31 Fifty One & Paise

bonding material. Rates are including of making good the wall ceiling &

floor etc. complete. (excavation of fearth in trenches & filling will be paid Thirty One Only

separately where ever required (A) 25mm dia.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

28 Providing and fixing to wall, ceiling and floor trenches blue threaded

C.PVC SDR-113.5 I.S.I mark of following in side dia. Tube fitting & clamps

will all required fitting such as reducing coupler, Union, band plug, end Rs. Four Hundred

cap, pipe clip, tee, hex nipple, elbow, coupler etc. complete with using

83.00 Rmt 443.29 Forty Three & Paise

bonding material. Rates are including of making good the wall ceiling &

floor etc. complete. (excavation of fearth in trenches & filling will be paid Twenty Nine Only

separately where ever required (A) 40mm dia.

29 Provinding and fixing gun metal check or non return full way

WHEEL / HANDLE VALVE 40 mm dia. Rate are inclusive of all Rs. Six Hundred Fifty

matreials, Labour & Necessary Fittings etc. Complete as per

3.00 No 656.86 Six & Paise Eighty Six

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. All material used as per approved make list Only

by GSPHCL.

30 Provinding and fixing gun metal check or non return full way

WHEEL / HANDLE VALVE 25 mm dia. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per

Rs. Four Hundred

Detailed Drawings, Specifications and as per the Instruction of 2.00 No 416.47 Sixteen & Paise Forty

Engineer In charge. All material used as per approved make list Seven Only

by GSPHCL.

31 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste

pipe with 'O' ring 110mm dia of ISI 13592/92. Rate inclusive of all Rs. Four Hundred

fittings like single or double "Y" with door, reducer, coupler single

T with door bend, pipe clip on wooden patti etc.complete and

17.00 Rmt 485.22 Eighty Five & Paise

making good the wall,ceiling and floor. Twenty Two Only

32 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste

pipe with 'O' ring 75mm dia of ISI 13592/92. Rate inclusive of all Rs. Two Hundred

fittings like single or double "Y" with door, reducer, coupler single

T with door bend, pipe clip on wooden patti etc.complete and

32.00 Rmt 256.81 Fifty Six & Paise

making good the wall,ceiling and floor. Eighty One Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

33 P & F to Wall Ceilling and Floor SWR Rain Water Pipe as Per IS-

13592 of 90mm Dia. Complete with Special Flings, Compressor

type Fittings, Wall clips on wooden patty including making good Rs. Three Hundred

the ceiling and floor on terrace rain water pipe shall be 90 mm Dia.

SWR horizontal pipe and vertical pipe and 90mm bend at the end

30.00 RMT 314.52 Fourteen & Paise

near by Ground level rate are Inclusive of all Necessary Fittings Fifty Two Only

required for ALL FLOORS. Including Z Patti

34 Providing & fixing in position ISI marked Rotational moulded

Polyethylene double layer cylindrical vertical storage tank (IS :

12701) water tank size inlcuding making inlet and outlet. Over

flow and washout arrangement with G.I. connection inlcuding Rs. Three & Paise

using necessary M.H. for connection etc. complete with closed

2000.00 Liter 3.91

Ninety One Only

cover including applying two coats of oli painting outside the tank

etc.complete.

35 Providing & Fixing Shower with Arm. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per Rs. Nine Hundred

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Shower with Arm Shall

2.00 No. 931.79 Thirty One & Paise

be as per the Approved Make List of GSPHCL. Seventy Nine Only

36 Angular Stop Cock (CON-CHR-053 Jaquar) Providing and fixing Auto

Closing Bib Cock with necessary concealed fitting and cover panels. All

the damages incurred while fixing shall be repaired to the satisfaction of

Rs. Six Hundred Sixty

the engineer in-charge and consultant. Auto Closing Bib Cock shall be of 6.00 No 665.51 Five & Paise Fifty One

Jaquar, Ess Ess, Marc made or is equivalent as approved by engineer in- Only

charge and consultant.

37 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with

Exposed Part & Other Accessories (Sleeve, Lever, Wall Flange).

Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Rs. Nine Hundred

Complete as per Detailed Drawings, Specifications and as per the

2.00 No. 942.54 Forty Two & Paise

Instruction of Engineer In charge. The Model & Make of Concealed

Heavy Stop Cock Shall be as per the Approved Make List of Fifty Four Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

38 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate

are inclusive of all matreials, Labour & Necessary Fittings etc. Rs. Nine Hundred

Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Bib Tap

4.00 NO 990.61 Ninety & Paise Sixty

Shall be as per the Approved Make List of GSPHCL. One Only

39 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Rs. One Thousand

Complete as per Detailed Drawings, Specifications and as per the Three Hundred Nine

Instruction of Engineer In charge. The Model & Make of Two way

& Paise Thirty Nine

Bib Tap Shall be as per the Approved Make List of GSPHCL. Only

40 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of

all matreials, Labour & Necessary Fittings etc. Complete as per Rs. Five Hundred

Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Health Faucets Shall be

2.00 NO 565.51 Sixty Five & Paise

as per the Approved Make List of GSPHCL. Fifty One Only

41 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete

& M. I. fisher union, P.V.C water pipe with Connection from Stop

Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P.

brassa waste coupling etc. Complete. Rate are inclusive of all Rs. Three Thousand

matreials, Labour & Necessary Fittings etc. Complete as per Nine Hundred Thirty

Detailed Drawings, Specifications and as per the Instruction of

Five & Paise Thirty

Engineer In charge. The Model & Make of Wash Basin Shall be as Three Only

per the Approved Make List of GSPHCL. including pillar cock angel

cock bottale trap

42 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover &

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil

pipe. Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm Rs. Five Thousand

dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Four Hundred

Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 2.00 No. 5470.90

Complet as per Detailed Drawings, Specifications and as per the Seventy & Paise

Instruction of Engineer In charge. Materials used for the above items Ninety Only

Must be list approved by G.S.P.H.C.L.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

43 Providing and fixing SS Sink Glosy 304 Grade x 1mm thick with over

all size 610x460 mm & bowl size 560x410x200 including C.I./M.S. Rs. Three Thousand

Brackets (duly painted with 2 coats of paint over a coat of primer), C.P.

brass waste, 32 mm dia pvc flexible pipe, rubber adaptor, wall flange,

1.00 Nos 3695.00 Six Hundred Ninety

union, C.P. brass chainrubber plug & making good. Five Only

44 Providing & fixing SS Jali Floor Drain Jali For Nanhi Trap including Rs. Five Hundred

cutting & making good the walls

4.00 No 593.70 Ninety Three & Paise

Seventy Only

45 Constructing Brick masonry road Gully chamber 500mm x 450 X 600 Rs. One Thousand

mmincluding 500x450 mm CI horizontal grating with frame complete

One Hundred

Seventy Six & Paise

Ninety Four Only

46 Construction brick masonary chamber for under ground C. I.

Inspection chamber and bends with brick having crushing strength

not less than 35 kg/cm2 in CM 1:5 RCC top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size) with 8 mm dia steel at 15 cm. C/C and providng and fixing

precast RCC cover size 0.60 x 0.45 x 0.07 m with 40 x 40 x 5 mm Rs. Three Thousand

angle frame and foundation concrete 1:5:10 inside plaster 15 mm Seven Hundred

thick with cement with a floating coat of neat cement walls and bed

Ninety Three & Paise

concrete etc. complete. Rates are also includsive of out side 15 mm Eighteen Only

thick in C:M 1:3 from top of chamber and all side upto 45 Cms. deep

below ground level (A) Inside dimensions, 455 mm. x 610 mm. and

450 mm. Deep for multi purpose pipe line.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

47 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class

SN8 Structured Wall polyethelene Piping systems (Pipe with

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application

as per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (100mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene

Rs. Two Hundred

Piping and fittings with the help of coupler ( on line / off line ) attached 50.00 Rmt. 229.00

with one end of pipes, sliding over the elastomeric sealing rubber ring Twenty Nine Only

placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction

of Engineer-in-charge.

48 Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler

and elastomeric sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores etc. complete. (150

mm ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall

( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line ) attached with one end Rs. Three Hundred

of pipes, sliding over the elastomeric sealing rubber ring placed on the specified Ninety Six Only

valley of the corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints, ensuring

the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes &

fittings from site stacks to the place of laying etc. as per direction of Engineer-in-

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

49 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on

Ceilling/Slop Surface (two coats) to give an required shap even

shade after throughly brushing the surface to remove all dirt and

remains of loose poweder material etc. complete. Rate are inclusive

of applying two coat of lapy (Putty) and one coat of primer on new Rs. One Hundred

Ceilling/Slop Surface to give and even shade including thoroughly 210.00 Sqm. 193.29 Ninety Three & Paise

brushing the surface free from mortar dropping andother foreign Twenty Nine Only

matter and sand papered smooth. Fine Putty primers and Plastic

Emulsion Paint Shall Be Used As Per approved Material List By

50 Finishing Wall with Plastic Emulsion Paint on Wall Surface

(two coats) to give an required shap even shade after throughly

brushing the surface to remove all dirt and remains of loose

poweder material etc. complete. Rate are inclusive of applying two Rs. One Hundred

coat of lapy (Putty) and one coat of primer on new wall surface to

give and even shade including thoroughly brushing the surface free

690.00 Sqm. 180.25 Eighty & Paise

from mortar dropping and other foreign matter and sand papered Twenty Five Only

smooth.primers,Putty and Plastic Emulsion Paint Shall Be Used As

Per approved Material List By G.S.P.H.C

51 Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) over and above applying One Coat Of

Primer to give an required shape even shade after thoroughly Rs. One Hundred

brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete.primers and exterior Emulsion

1357.00 Sqm. 153.35 Fifty Three & Paise

Paint Shall Be Used As Per approved Material List By G.S.P.H.C Thirty Five Only

52 Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work

concrete in base and making good the disturbed ground

Rs. Sixty Nine & Paise

stacking useful materials as directed and disposing as directed and 180.00 Rmt 69.46

disposing of the Forty Six Only

unserviceable materials with all lead and lift.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

53 Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other Rs. Two Hundred

attachment etc. complete and stacking them within all lead and 45.00 Nos. 261.29 Sixty One & Paise

lift. (i) Not exceeding 3 Sq.M. in area. Twenty Nine Only

54 Excavation for foundation upto 1.5 mt depth including sorting out

and stacking of useful materials and disposing off the excavated stuff Rs. One Hundred

upto Any lead & Lift (A) LOOSE OR SOFT 189.00 Cmt 121.91 Twenty One & Paise

Ninety One Only

55 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 Rs. Two Thousand

crushed stone aggregates 40mm nominal size) and curing complete

Seven Hundred

including cost of form work in foundation and plinth. 46.00 Cmt 2732.02

Thirty Two & Paise

56 Brick work using common burnt clay building bricks having crushing

strength Not less than 35 Kg/Sq.cm.below plinth level conventional Rs. Four Thousand

bricksin cement mortar 1:6(1-cement;6-fine sand) in foundation and One Hundred

plinth. 147.00 Cmt 4172.37

Seventy Two & Paise

Thirty Seven Only

57 PROVIIDNG AND FIIXNG chainlink type fencing of 10 guage (3mm) 2"x2"

mesh as per design including necessary fitting with nuts & bolts etc. Rs. Five Hundred

Complete with approved brand of oil paints on oil surface painting two 440.00 Smt 551.45 Fifty One & Paise

coats etc. Complete to m.s. Angle post as per approved pattern etc. Forty Five Only

58 Providind & Laying Cement Concrete work (1:2:4) and curing complete

excluding cost of form work and reinforcement for reinforced concrete Rs. Seven Thousand

work in (A) Foundations, Footings, Base of Columns and Mass Concrete. Four Hundred

Seventy Nine & Paise

Eighty Two Only

59 Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even Rs. One Hundred

shade including cleaning the surface an even shade including Twenty Seven &

cleanicn the surface of all dirt, dust and other foreign matte all

Paise Thirty Five

material shall be used as per approved kale list by GSPHC. Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

60 Providing and Fixing corrugated JSW pre coated sheet roofing

fixed with galvanised iron J or L hooks, bolts and Nuts 8 mm Rs. One Thousand

dia with bitumin and G.I. Limpet washer or G.I. limpet washer 413.00 Smt 1022.75 Twenty Two & Paise

with white lead complete excluding the cost of Purlines

Seventy Five Only

rafters and trusses (0.60mm thick)

61 Providing and laying 25mm thick Pre polished Dimond cut kota

stone in green colour flooring over average 20mm thick base of Rs. One Thousand

cement mortar 1:6 (1 cement : 6 coarse sand) & joined with grey cement

slurry including rubbing polishing etc.complete All Kota Stone edges

80.00 Smt 1108.30 One Hundred Eight &

Shall Be Hand Cut ,Machine Cut Shall Not Be Allowed etc Complete For Paise Thirty Only

All Floors.

62 Providing and Laying Double Pre Polished (Dimond Polished) 25mm Rs. One Thousand

Thick Polished Kota Stone in Skirtings over 10mm thick base of cement

Three Hundred

mortar 1 : 3 (1-Cement :3-Coarse Sand) laid over and jointed with grey 4.00 Smt 1313.40

cement slurry including Rubbing and Polishing etc. Complete for ALL Thirteen & Paise

FLOORS. Forty Only

63 Providing & laying Controlled Cement Concrete M 150 and

curing complete including cost of Formwork of Plywood only with

fair finish so as to give fair finish and Excluding cost of Rs. Four Thousand

reinforcement for reinforced concrete work in foundation & 15.00 cmt 4061.02 Sixty One & Paise

plinth. Rate are also inclusive of providing and mixing Plasticizer Two Only

of approved make in proportion as Per Mix Design.

64 Provinding and Laying controlled cement concrete M-200 and

with curing etc.complete. Including the cost of plywood Rs. Six Thousand

formwork only with fair finish but excluding the cost of

11.00 cmt 6051.15 Fifty One & Paise

reinforcement for R.C.C work in Coping . Rate are inclusive of

providing and mixing plastisizer of approved make in propertion Fifteen Only

as per mix design.

65 Providing & laying Controlled CEMENT CONCRETE M-250

and finishing smooth with curing etc complete including cost of Rs. Four Thousand

Formwork with Sheathing Steel Sheets so as to give fair finish

Six Hundred Seventy

but excluding the cost of reinforcement in column FOOTING 4.00 cmt 4674.84

base of columns and Mass concrete. Rate are also inclusive of

Four & Paise Eighty

providing and mixing Plasticizer of approved make in proportion Four Only

as Per Mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

66 Providing and laying controlled cement concrete M-200 and

finishing smooth with curing etc. complete Including the cost of Rs. Ten Thousand

plywood formwork only with fair finish but excluding the cost of Seven Hundred

reinforcement for R.C.C. work in COLUMNS for any cross 3.00 cmt 10723.87 Twenty Three &

sectional area at GROUND FLOOR. Providing and Mixing Paise Eighty Seven

Plasticiser in cement concrete including rate of labour,material Only

etc.as per direction of Engineer in charge.

67 Providing & laying Controlled CEMENT CONCRETE M-250 &

finishing smooth with curing etc. complete including cost Rs. Seven Thousand

ofplywood formwork only with fair finish but excluding cost of Two Hundred Fifty

reinforcement For Plinth Beam Having any C/s Area. Rate are 2.00 Cum 7257.99

inclusive of Pro.& Mix plastisizer of approved make in proportion

Seven & Paise Ninety

as per prescribed by manufacture. Nine Only

68 Providing TMT Bars Fe -500 reinforcement of any other approved

brand of GSPHC ONLY for RCC work including cutting, bending, Rs. Seventy Six &

binding and placing in position etc.complete for all floors.

Paise Fifty Two Only

69 Filling available excavated earth (excluding rock)in trenches plinth Rs. One Hundred

sides of foundation etc. in layer not exceeding 20cm. In depth

consolidating each deposited layer by ramming and watering.

181.00 cmt 135.56 Thirty Five & Paise

Fifty Six Only

70 Provinding 20 mm thick SAND FACED cement PLASTER on walls above Rs. Three Hundred

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement

: 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand )

174.00 Smt 312.56 Twelve & Paise Fifty

etc. Complete for any height. Six Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

71 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Rs. Six Hundred

Confirming to IS 15658 : 2006 including 35 mm Sand layer for 300.00 Sqm 699.90 Ninety Nine & Paise

levelling and filling the joint with sand in proper line and level as Ninety Only

per guidlines of IRC : SP 63-2018 etc. Complete.

Total Civil Amt=

Electrification

72A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 35.00 Point 403.00 RS: Four Hundred Three

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC only

insulated FRLS wire for earth continuity in 20/25/32mm ISI mark PVC casing

capping double lock type & necessary accessories erected flushed on

wall/ceiling complete with approved make 5/6 Amp. ISI mark modular type

switch and accessories mounted in company made PVC box covered with

appropriate front plate modules erected flushed with necessary modular

lamp holder / modular ceiling rose / HD Connector( make & Model approved

by EIC & matching colour with switch accessories) wth PVC box as directed

for casing caping wiring. Length of point wiring must not increase than

mtr. For that necessary switch boards and their locations must be finalised

before execution by agency otherwise payment will not be done for extra

long point. Light point. Cat.-III.(Conductor resistance should be as per

72B For secondary light point Cat.-III. 5.00 Point 110.00 RS: One Hundred Ten

72C For Bell Point Cat-III 2.00 Point 403.00 RS: Four Hundred Three

72D For Fan Point (with 6 A. Modular type switch and two module hum free EME 10.00 Point 590.00 RS: Five Hundred Ninty

Five step type Electronic fan regulator both having ISI mark) Cat.-III only

72E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 12.00 Point 427.00 RS: Four Hundred

mark) Cat.-III Twenty Seven only

72F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both 15.00 Point 255.00 RS: Two Hundred Fifty

having ISI mark) Cat.-III Five only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

73 Providing and erecting Medium Class FIA approved and ISI mark white 150.00 Mtr. 24.00 RS: Twenty Four

colour (embossed) RIGID PVC PIPES of following size complete erected with only

necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

74 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having 100.00 Mtr. 31.00 RS: Thirty One only

double-locking arrangement with grooves, trunking of size not below

mm in height as per IS with accessories of PVC/Resin polypropylene not

below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of

following size .(a)25mm

75A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 180.00 Mtr. 56.00 RS: Fifty Six only

grade with ISI mark 20/25/32mm PVC casing capping double lock type with

necessary accessories erected flushed on wall/ceiling complete with FRLS

PVC insulated wire for earth continuity. [a] 2 x 1.5 sq.mm. FRLS copper

multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code.(Conductor

resistance should be as per IS:8130/1984)

75B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 150.00 Mtr. 82.00 RS: Eighty Two only

sq.mm. FRLS copper multi stranded conductor for earthing as per standard

colour code(Conductor resistance should be as per IS:8130/1984)

75C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 70.00 Mtr. 135.00 RS: One Hundred Thirty

sq.mm. FRLS copper multi stranded conductor for earthing as per standard Five only

colour code.(Conductor resistance should be as per IS:8130/1984)

76 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe 30.00 Mtr. 31.00 RS: Thirty One only

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of

following sizes.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

77 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved 12.00 Each 608.00 RS: Six Hundred Eight

make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) only

copper PVC insulated FRLS wire for earth continuity in ISI mark PVC casing

capping double lock type with necessary accessory erected flushed on

wall/ceiling complete with 16 Amp Modular type Swich and accessories

mounted in company made PVC box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp. Indicator switch & 1 No.

6/16 A universal socket white colour suitable for 3 pin top duly both having

ISI mark. Cat.-III

78 Providing following type of Modular Type Accessories mounted with 20 G 50.00 Each 25.00 RS: Twenty Five only

G.I. company fabricated metalic box/Company made PVC box , single

mounting base frame covered with textured / metallic front plate, modules

erected with necessary connection. As desired by Engineer in charge. Blank

Plate Single. Cat.-III

79 Providing & erecting Switch board for Computer or electric apparatus 8.00 Each 1122.00 RS: One Thousand One

consisting of following items in single board erected on Metal board erected Hundred Twenty Two

as directed. 1 no. 6/16 Amp. universal Socket, 1 nos. 16 Amp. indicator only

switch, 3 nos. 6 Amp. Switch & 3 nos. 6 Amp. 5 pin Plug.

For Computer power Supply board. Cat. III

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

80 Providing & erecting Approved make 16 Way Double Door metal clad D.B. 1.00 Each 5536.00 RS: Five Thousand Five

company prewired having Incoming MCB DP 40 Amp. 30 mA double pole Hundred Thirty Six only

ELCB, 40 Amp. DP MCB (C curve) and 12 Nos. S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 230 Volt A.C. power and having

overload and short circuit tripping element breaking capacity 10KA to be

erected in flush/ Surface type(Erecting on Polish wooden board) and

company fabricated sheet box with powder coated inside and outside after

apply seven tank chemical process of CRCA. sheet cover complete with

suitable integral single piece construction tinned copper busbar- and link

with all necessary interconnection loose wire box, terminal connectors for

all incoming and outgoing circuits, with suitable size FRLS PVC insulated

copper conductor up to terminal blocks & internal connection .and

necessary size metalic frame for surface mounting MCBDB. Manufacturer

must be Provided.MCBDB door,back side & body of MCBDB must be made

of 1.2 mm thick CRCA sheet (1) IP 43 protection as per IS: 8623-183,IEC

61439-183 Certificate having D type PU gasket.

(2) Seven tank Power Coating cerificate. (3)tinned plated Coppper busbar &

Brass Neutral & Earthing link with isolation and Protecting Cover.(MCBDB

must be erected in line level & level with spirit level and finish the external

edge with box cutting plaster)( Same color MCB(SP/DP) should be used as

same as MCBDB)( Incl. necessary numbiring /marking on box done with RED

colour radium sticker as per site requirement & instruction given by EIC on

site. Font/ Number size given by EIC on site as per requirement) For 16 Way

MCBDB with I/c:-40 Amp-DP 30 mA-10 KA ELCB - 01 no. & 40-Amp-DP MCB

(C curve) - 01 no. & O/G:- 6 Amp-SP MCB=6 Nos. 16 Amp-SP MCB=6 Nos

81 Providing & erecting 240 V MCB Double pole switch for Motor and inductive 2.00 Each 502.00 RS: Five Hundred Two

load (C curve) having 10 KA breaking capacity & confirms to IS:8828 with only

same company metal box with earthing terminal having following capacity

with necessary Numbering with oil Paint by painter. For 40 Amp.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

82 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore 1.00 Each 7025.00 RS: Seven Thousand

of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Twenty Five only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal

Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must

be done after above process.Galvanised thickness must be minimum

micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia.

hole must be provided at terminal. total minimum Weight(approx.) of earth

electrodewith inside conductive material minimum should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 50 Kg. Necessary

test report must be submitted.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

400mmX400mmX400mm depth and Cover should be heavy duty cast iron

with required size of 300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail &

sample for approved before supplying

Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to

at least 02 ohms & voltage between neutral &Earthingupto 02 volt. Agency

has to maintain earthing& its value for one year. If required. Earthing must

be done in the presence of A.E (GSPHCL)

83A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 50.00 Mtr. 56.00 RS: Fifty Six only

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

For One wire 6.00 Sq.mm

83B For One wire 16.00 Sq mm 50.00 Mtr. 141.00 RS:One Hundred Forty One

84 Supplying and erecting 8 W LED lamps of 220 to 240 voltage, minimum 15.00 Each 111.00 RS: One Hundred Eleven

15000 burning hours life, 500 V in built-surge protection,Polycarbonate only

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)

LED Lamps integral type, with PC diffuser suitable LAMP holder

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

85 Supplying and Erecting LED indoor fitting of approximately 4feet long with 20.00 Each 370.00 RS: Three Hundred

LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use Seventy only

as a heat sink shall be made from Aluminum extrusion having enough

strength (sample must be approved by EIC)with polycarbonate diffuser with

following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D)

Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD :Max.

15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min.

80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L)

Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge

protection : Min. 2KV(N) IP rating: IP 20(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

provided(Q) Fixing clamp design & strength should be sufficient to hold the

fitting erected on wall or ceiling.(R) 3 core copper wire of appropriate size

with earthing connector

(Note: The manufacturer/ authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete

Fixture)(Model approved by Engineer in Charge subject to above

Specification.)[Approval will be given strictly subject to item specification]

86 providing and erecting Polycarbonate body surface mounting LED Bulk head 2.00 Each 780.00 RS: Seven Hundred

type 9 watt Lighting Fitting with electronic driver having THD<15% Eighty only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , input voltage

range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver having

THD > 80lm/w., -20degC to +60degC working temperature, AL frame with

Beam Angle 120deg.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

87 Providing, erecting, testing ceiling Fan confirming to IS: 374/1979 AMDT No. 6.00 Each 1929.00 RS: One Thousand Nine

1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Hundred Twenty Nine

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > only

0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum 350, (6)

Service Value : Mini. 4.3 m3/mtr (7) Class of insulation: 'B', (8) No. of heavy

duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom

should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy

duty, (13) Condenser: Minimum 1.5 mfd (15% Tolerance) as per IS: 1709-

1984, Aluminium body premium quality Branded make,(14) Down road: up

to 1.0 mtr as per site tequirment, (15) Required fixing accessories etc. (16)

3 core 1.0 sq.mm wire as per site requirment,(17) no vibration and noise

due to mechanical parts. (18) Necessary safety wire shoud be erected with

fan for safety & Check with EIC (19) BEE Star Rated (OEM has to approved

model as per tender specification and tested at ERDA) model approved by

engineer in charge subject to above specifications)

88 Providing & erecting Fan clamp of 30 x 5 mm flat of required length & 10 10.00 Each 98.00 RS: Ninty Eight only

mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

89 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt 2.00 Each 170.00 RS: One Hundred

complete erected on existing polished wooden block or in M.S. box with Seventy only

3mm thick white ISI mark laminated sheet. (Anchor-Chime

model,Rider,Vision)

90 Supplying & erecting 12 mm thick backelite sheet of approved make and 1.00 Sq.Mtr. 2289.00 RS: Two Thousand Two

grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for Hundred Eighty Nine only

fixing ICDP SWITCH and energy meter (contractor shall make approved

drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP

switch -busbar etc. as per Actual space available in electrical room at site)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

91 Providing, erecting, fabricating the M.S. structure as per requirement of site 30.00 Kg 75.11 RS: Seventy Five and

as per structure design Including proper size approved by EIC of M.S. Paise Eleven only

angles, flats, bars, square pipe, channels, sections (Tata,Zindal,Asian,Jsi

Make) complete with cutting, welding, grinding and finishing duly painted

with Asian/Nerolac make premium quality oil paint and true care red oxide

metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with

M.S plate welding. Payment will be done on KG as per Actual weight.

92 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm 4.00 Each 487.00 RS: Four Hundred Eighty

outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick Seven only

and required size and length suitable for 76.5 / 80 mm. required size of pole

top or pipe in pipe surface for terrace as per instruction of EIC or wall

bracket as per instruction of EIC having nuts and bolts for fixing the brackets

and having spread of Upto 0.70 mtr. length with suitable degree angle as per

site situation suggested by EIC.Vertical plane and suitable welded stiffner

reducer and nipple with check nut complete painted with one coat of red

oxide and two coats of alluminium paint( Zinc coating before alluminium

paint in mandatory)with with 150X150X2mm thick G.I plate with 4 nos

heavy duty galvanized zatis khilla required size or Single arm bracket (pipe in

pipe type )suitable for terrace as per design given by EIC For single arm

bracket. (Fabricators: Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test

certificate to be submitted)(For wll bracket)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

93 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 4.00 Each 3512.00 RS: Three Thousand Five

consumption of Max. 45 W with broad single piece die cast aluminium Hundred Twelve only

housing of broad size for better thermal managment (Appr.by EIC) , LED's

mounted on high quality metal core PCB with extremely precison designed

heat sink complete with IP66 protection Class with polycarbonate /

Toughned glass cover. the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with high

power LED module min. 130lumen/watt with toughen Glass L70 at

hrs, provided with individual high quality polycarbonate lenses for better

light distribution. The watt of each LED must be >= 4 watt in street light

fitting.The Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality driver for protection against mis

Wiring,over voltage high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver should be less than

10% and P.F greater than 0.95. Also the Fixture should meet the following

technical criterias Oprating range Voltage 160 to 270 V, system efficiency

greater than 110 lm/w,Operation current less thanequal to700MA, and

Lumen Output of mini. 4950 Lumes, CCT greater than 5000K, CRI greater

than 65, seperate high quality lense,beam angle 120 deg, surge immunity

level at least 10 KV non integral & 4 KV intrgral

so that the fixture recovers once the fault is removed, over voltage

protection. In addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to 90%

RH. [Note: The manufacturer / authorised Channel partner of the

manufacturer has to submit 5 yr free replcement Guarantee for complete

Fixture]( model approved by engineer incharge subject to above

specification )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

94 Providing & Erecting Fabricating terminal box for street light pole made from 5.00 Each 702.00 RS: Seven Hundred Two

16 G. (1.5 mm.) thick M.S. sheet having following size complete with fixing only

arrangement for terminal board, with necessary hole for 4 core 4 sq.mm.

armoured copper cable entry and exit with 10 mm nipple from the box. The

box shall be provided with cover having up down movement with suitable

mechanism and hinges on Top and bolting lock at bottom end. The box shall

be fixed by 2 nos.clamps fabricated from 25 x 6 mm flat. The box shall be

powder coated paint or good oil paint inside & outside of the box. The size

of box should be 300 x 240 x 140 mm. (depth). Also providing & fixing

terminal board of size 230 x 125 x 6 mm bakelite sheet with 15 Amp.

copper/brass kitkat pattern porcelain fuse unit mounted on suitable size of

bakelite terminal plate. (Asian colour must be used)

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 40.00 Mtr 46.00 RS: Forty Six only

grade ISI marked copper wires of following size to be erected as directed.

For 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

Providing and erecting open well type horizontal submersible mono block 1.00 Each 7856.00 RS: Seven Thousand Eight

pump set with cast iron body having following specification For 1 phase Hundred Fifty Six only

open well horizontal mono block pump set suitable for 115LPM discharge at

required head as per plumbing length and vertical & Horizontal head.

Agency has to submit the details calculation of head to GSPHCL and get

approval of make and model of pump having tender specification with TDS

& GA drawing. Suitable for 32mm dia delivery pipe with 10 mtr. necessary

Size 3 Core Flat copper flexible cable & with control panel. (Body: Cast iron /

Winding : Copper / stator : Copper / rotor : Copper / shaft : SS / Carbon

material test certificate from manufacture shall be submitted).

Lifting of submersible motor pump set complete with required No .& size 1.00 Per Job 848.00 RS: Eight Hundred Forty

of casing pipes by means of proper chain pulley block and pipe. wrenches. Eight only

97 Job includes stacking of pipes chronologically after due checking of

threads.For Open well Horizontal submersible pump set for sump wel For

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 20.00 Mtr. 65.00 RS: Sixty Five only

98 Submersible copper cable approved make of following Size. For 3 Core x

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & Erecting Universal Astro 5 KVA intelligent streetlight control 1.00 Each 12895.00 RS: Twelve Thousand

system insu with weather proof box for outdoor application. (As per Eight Hundred Ninty Five

specification attached separately) (Make and model approved by EIC) only

Providing & fixing Solderless crimping type Copper lugs conforming to IS 40.00 Each 8.00 RS: Eight only

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner.

For 1.5/2.5 to 6 Sq.mm

Providing & erecting XLPE (IS : 7098) (I) 88 ISI marked armoured Copper 170.00 Mtr 213.00 RS: Two Hundred

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall Thirteen only

with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC

pipe underground or road crossing or floor of following size of cables For

core x 2.50 sq.mm.(For Street light)

Total Ele Amt=

Total Civil+Ele

D.Y.Executive Engineer Executive Engineer

G.S.P.H.C.Ltd., G.S.P.H.C.Ltd.,

Gandhinagar. Gandhinagar.