Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹43.1 L+₹1.7 L (4.03%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹47.7 L+₹6.3 L (15.1%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO BLDG NO P 144 P 146 COOK HOUSE AND CDO CLUB OF PARA SF AND OTHER CERTAIN SANCTIONED WORKS IN THE AREA OF AGE B R II UNDER GE ARMY CENTRAL JODHPUR
2022_MES_546427_1
GE/J/A OF 2022-23 (9131/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹1 L
Yes
4 Oct 2022
20 Aug 2022
24 Sept 2022
20 Aug 2022
17 Sept 2022
3 Sept 2022
Amount
B/R WORK Demolition of Cement concrete in ground floors and pavings not exc 15cm thickness below or above ground level) and removing debris out of MOD land, complete all as specified and as directed by Engr-in-Charge.
Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land, complete all as specified and as directed by Engr-in-Charge.
M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) to receive floor finishes etc., including necessary formwork, complete all as specified and as directed by Engr-in-Charge.
M&L for 16-18mm thick Udaipur green marble machine cut in cooking platform laid including & over 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and as directed by Engr-in-Charge.
M&L for light shade, single charged, Vitrified Ceramic tiles, 9-10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, including & over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Somany/ Kajaria/ Orient as approved by GE.
M&L for coloured glazed ceramic tiles (Premium quality) 300 x 450 x 6-7 mm thick, as in verticle surface/skirting/dado, including & over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE, complete all as specified and as directed by Engr-in-Charge. Make : Kajaria/ Somany/ Orient as approved by GE.
M&L for coloured non skid ceramic tiles (Premium quality) 400 x 400 x 6-7 mm thick, as in floor etc set jointed and pointed in white or coloured cement to match the tile over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson as approved by GE.
M&L of 20-25 mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, including rubbing and Mirror polishing, complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and as directed by Engr-in-Charge.
M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L Rendering 10mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed by Engr-in-Charge.
Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed by Engr-in-Charge.
M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed by Engr-in-Charge.
M&L for three coats of white wash including preparation of new surfaces on walls all as specified and as directed by Engr-in-Charge.
M&L for three coats of white wash on ceiling including preparation of new surfaces, complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over one coat of primer, complete all as specified and as directed by Engr-in-Charge.
M&L for one coat of white wash on ceiling including preparation of old surfaces, complete all as specified and as directed by Engr-in-Charge
Preparation of new stone/ old stone surfaces and applying two coats of cement based paint, complete all as specified and as directed by Engr-in-Charge.
M/L one coat cement based paint on old plastered/ unplastered surfaces of wall including preparation of surface, complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil based emulsion paint, white or tinted, over a coat of 2 mm thick (Birla/JK) wall care putty on wall, complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying Two or more coats of 100% Premium acrylic emulsion paint (plastic paint) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,.complete all as specified and as directed by Engr-in-Charge
Taking down chowkhat with shutters (without taking off shutter from frame) size area not exc1.50 Sqm each, complete all as directed by Engr-in-Charge.
Taking down chowkhat with shutters (without taking off shutter from frame) size area exc 1.50 sqm but not exc 4.0 sqm each, complete all as directed by Engr-in-Charge.
S&F PVC door frame finish of size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in bed block for hold fast including necessary form work, complete all as specified and as directed by Engr-in-Charge.
Taking down of steel window and ventilators carefully, complete all as directed by Engr-in-Charge.
S&F factory made box type steel windows (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F factory made box type steel windows (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed by Engr-in-Charge.
S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and as directed by Engr-in-Charge.
M&L mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered, welded towindow framr & door frame, and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.
S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge.
M & L for pressed steel door frames (105X60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, PCC etc, complete all as specified and directed
S & F for IInd class hardwood, thickness of shutter in 30 mm, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as spd and directed.
S&F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and as directed by Engr-in-Charge.
S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm double action spring hinge, brass with phosphorus bronze wire spring bright polished, complete all as specified and as directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed by Engr-in-Charge.
S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.
S&F 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of the new steel surfaces & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth, complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .
Taking up or down GI steel /CPVC water tubing 15 mm bore and connection, including cleaning for refixing or remove to site or credit, complete all as directed by Engr-in-Charge.
Taking up or down GI tubing/CPVC 20 mm bore and connection, including cleaning for refixing or remove to site or credit, complete all as directed by Engr-in-Charge.
Supply, laying, testing & commissioning of 16 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ORP-10037PM or its equivalent model in Kohler/ Cera as approved by GE.
S&F in replacement Fancy type Chromium plated over head shower 120 mm dia with arm, round shape, single flow (ABS body CP with gray face plate) with Rubit cleaning system, suitable for 15mm bore pipe, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. OHS-1789 or equivalent in Kohler/ Cera as approved by GE.
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 20/25mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.
S&F in replacement pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed . Make : Jaquar Cat No. ALI-85001 or its equivalent in equivalent in Kohler/ Cera as approved by GE.
M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.
S&F CP towel rail (single) 600mm long fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Kohler/ Cera as approved by GE.
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed by Engr-in-Charge.
M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.
S&F of Vitreous China wash basin size 450 x 300mm with padestal, white, flat back, including CP waste coupling, waste pipe, PVC Connection 300 mm long, brackets, complete all as specified and as directed by Engr-in-Charge. Make : Hindware/ Parryware/ Cera as approved by GE.
S&F in replacement vitreous china wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc.,& provision of cement concrete making good to as existing floor, complete all as specified and as directed by Engr-in-Charge. Make:- Hindware / Parryware / Cera as approved by GE
S&F in replacement vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in replacement Including connection to trap etc and provision of cement concrete bedding and making good to floor, complete all as specified and as directed by Engr-in-Charge. Make : Hindware/ Parryware/ Cera as approved by GE.
Dismantaling of cast iron/PVC soil waste & vent pipes 100/110mm dia including all fittings etc., complete all as specified and as directed by Engr-in-Charge.
Dismantaling of cast iron/PVC soil waste & vent pipes 75mm dia including all fittings etc., complete all as specified and as directed by Engr-in-Charge.
S&F in replacement 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F in replacement 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .
S&F in replacement 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F in replacement 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed by Engr-in-Charge.
S&F 110 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed by Engr-in-Charge.
S&F for 100mm dia PVC cowls, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed by Engr-in-Charge.
S&F 10 ltrs capacity flushing cistern, low level, PVC valve less(Super special colors), (ISI Marked) syphonic action type, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed. Make:- Cera cat. No. B1010102 CIENA PREMIUM or its equivalent model in Parryware / Jhonson as approved by GE
S&F in replacement 15mm bore PVC connection for flushing cistern 600mm long best quality with PTMT nuts, complete all as specified and as directed by Engr-in-Charge.
M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished complete including forming joints in 2 mtr interval including necessary formwork laid in alternate bays and filled with bitumen mastic any description, complete all as specified and as directed by Engr-in-Charge.
Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land, complete all as directed by Engr-in-Charge.
Dismantling existing water tank of capacity exc 500ltrs but not exc 1000 ltrs and removing from site, complete all as directed by Engr-in-Charge.
S&F 500 ltrs capacity rotational moulded polythene water storage tank (white colour) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed by Engr-in-Charge. Make:- Sintex / Rotex as approved by GE
S&F 1000 ltrs capacity rotational moulded polythene water storage tanks (white colour) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE
M&L for carrying out roof treatment in the following stages:- Applying neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following stage as roof treatment complete all as specified and as directed by Engr-in-Charge : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 2.25 Kg/Sqm using butane torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause No. 21.3, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item. 3. Work of roof treatment shall be carried out by authorize applicator of APP manufracturer company.
M&L for Plain cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) over roof for making good depression/undulation and as in roof kerb to match the existing, complete all as specified and as directed by Engr-in-Charge.
"Supply only" integral water proofing compound (ISI marked), complete all as specified and as directed by Engr-in-Charge.
Demolition of brick work/stone masonary built in cement mortar including all quoins, pillars, etc., removal of unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.
M&L for squared rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed by Engr-in-Charge.
M&L for Precast cement concrete solid building blocks 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete all as specified and as directed by Engr-in-Charge.
M&L for providing Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone etc., (of any section as approved) with plain faces, including rounded or chamfered angles, weathering, throating etc., and setting in cement mortar 1:4 complete with joints to match, complete all as specified and as directed by Engr-in-Charge.
M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm gradded crushed stone aggregate) as in sub base for flooring, complete all as specified and as directed by Engr-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-Charge.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed by Engr-in-Charge.
M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning the existing reinf of slabs, chajjas etc., & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed by Engr-in-Charge.
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed by Engr-in-Charge.
M&L for 15-20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed by Engr-in-Charge.
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed by Engr-in-Charge.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed by Engr-in-Charge.
S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed by Engr-in-Charge.
S&F Soap Dish, viterous china white, approximate size 160 x 160 x 90 mm, fixed with CP brass screws, complete all as specified and as directed by Engr-in-Charge. Make : Cera / Hindware / Parryware as approved by GE
Use and waste of formwork to sides and soffits of slabs not exc. 200mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed by Engr-in-Charge.
Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs not exc 20cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10cm but not exc 20cm wide with fair finished surfaces, complete all as specified and as directed by Engr-in-Charge.
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed by Engr-in-Charge.
M&L RCC, M-25, design mix (using 20mm graded aggregate) as in slab supported on wall, roof slab, chajja and in shelve etc., complete all as specified and as directed by Engr-in-Charge.
M&L RCC, M-25, design mix (using 20mm graded aggregate) as in beam, cantilevers, bressummers, lintel overone meter span, complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
S&F mild steel TMT bar 5 dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.
Writing letters or figures (Black Roman, Italic or Indian) not exc 30cm high with thick paint, complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed .
M&L for salt glazed stoneware drain pipes 150mm dia (internal) grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork, complete all as specified and as directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and as directed by Engr-in-Charge.
Removing excavated soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in hard/dense soil, complete all as specified and as directed by Engr-in-Charge.
Anti Termite treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed by Engr-in-Charge.
Anti Termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed by Engr-in-Charge.
Anti Termite treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and as directed by Engr-in-Charge.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation and filling of manholes and in haunching against the sides of pipe on existing PCC bed , complete all as specified and as directed by Engr-in-Charge.
M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in Damp proof course, to horizontal or vertical surfaces including necessary form work , complete all as specified and as directed by Engr-in-Charge
Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
M&L for hard core broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface, with power roller, complete all as specified and as directed by Engr-in-Charge.
M&L for roguhly squared stone lintels hammer dressed on face and soffits hoisted, set and pointed incm 1:6 complete n.exc 3.00 m in length, complete all as specified and as directed by Engr-in-Charge
M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately.
M&L for Jodhpur stone of roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3, complete all as specified and as directed by Engr-in-Charge.
S&F of Flush pipe of polythylene of low or high density or PVC 32mm dia for WHB, complete all as specified and as directed by Engr-in-Charge
M&L PVC floor trap with grating including jointing to waste pipe fixed in cement concrete with outlet dia 100mm, complete all as specified and as directed by Engr-in-Charge
M&L for SGSW gully trap , square or round mouthed, type "P" 180x150 mm,complete all as specified and as directed by Engr-in-Charge
M&L for 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in roofs, finished the surface even and smooth with WPC, complete all as specified and as directed by Engr-in-Charge.
S & F CP two way angle bib cock with wall flange, screwed down high pressure,screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. Make: JAQUAR Cat No.LYR- 38041 of make or equivalent model in Kohler/ Cera as approved by GE
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed by Engr-in-Charge
M&L for Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6, complete all as specified and as directed by Engr-in-Charge
S&F TMT bars 6mm dia to 8mm dia , cut to length , bent to shape required, incld cranking, bending spirally for hooping for columns, hooking ends and binding with and incld mild steel wire (annealed) not less thaan 0.90mm dia or securing with clips
Cutting into existing manholes for connecting new drain pipe and making good to pipe and rendering cutting out existing benching for and forming branch (1/2type B-1 smooth finished, and reforming benching as required] round or 3/4th Section) in cement concrete 1:2:4 channel , complete all as specified and as directed by Engr-in-Charge
M&L for connecting 20 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line, complete all as specified and as directed by Engr-in-Charge
Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed, complete all as specified and as directed by Engr-in-Charge
M &L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil, complete all as specified and as directed by Engr-in-Charge.
M&L for rolled mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position ,complete all as specified and as directed by Engr-in-Charge.
M&L for pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with J or L hooks complete all as directed, complete all as specified and as directed by Engr-in-Charge
M&L for Mild steel framed work as in gate, railings etc using MS angle iron, holo pipes, flat iron, nuts & bolts, MS Sheet etc complete all as specified & directed incl necessary welding etc, complete all as specified and as directed by Engr-in-Charge
S&F of Iron plates, any size, of galvanised iron sheet 1mm thick, fixed with galvanised screws in iron gate, complete all as specified and as directed by Engr-in-Charge
M&L for Machine cut kota stone slab flooring 18-20 mm thick over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing ,complete all as specified and as directed by Engr-in-Charge.
All as per Item No. 146.00 here-in-above, but as in skirting, dado over and including 15mm thick rendering in CM (1:4) and polishing ,complete all as specified and as directed by Engr-in-Charge.
Removing of existing filling in sunken floor of wc/bath/kitchen and in replacement to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with PC than painting with bitumen 30/40 over a coat of bitumen primer putting 50 micron polythene than filling with pcc 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50 mm bore GI water pipe light grade spout complete all as specified and as directed by Engr-in-Charge
Excavating in post holes or similar holes each not exc 0.50 cu.m, getting out soft/loose soil, returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing srplus soil soil to a distance not exc. 50 m, complete all as specified and as directed.
Plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, concrete block for iron strut or post complete all as specified and as directed .
M&L mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 or E 165-0, complete all as specified and as directed by Engr-in-Charge.
M&L for rolled mild steel confirming Fe-290 (Gde E-165) in door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclding of steel, sheeting or other covering ) and hanging also fastening and fixing complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.
"Supply only" chain link MS Galvanised fencing any size or type, complete all as specified and as directed by Engr-in-Charge. Note:- BOO will be consituted to determine the weight of chainlink fencing.
"Fixing only" chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and as directed by Engr-in-Charge.
S&F MS round bars 10mm dia cut to length bent to shape required including cranking bending spiarally for hopping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS, complete all as specified and as directed by Engr-in-Charge.
E/M WORK Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.
Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed .
Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.
M&L point wiring using approved colour coding as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories surface mounted or concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/ prestressed steel sunken / concealed box (with earth dolly) with 3 mm thick plastic laminated sheet (ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & unsheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and as directed.
All as per serial Item No.159.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and as directed.
All as per serial Item No.159.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and as directed.
All as per serial Item No.159.00 above but for 15/16 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 4.00 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 3 Pin, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed.
S&F socket outlet, flush type, single pole, 2 in 1, 6 Pin, 6/16 Amps, 230 Volts,ISI Marked, complete all as specified and as directed.
S&F Lamp holder, metal cased, bakelite body, 230 volts,, complete all as specified and as directed by Engr-in-Charge.
S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.
S&F in replacement of round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by Engr-in-Charge. Make: Philips/Havells/Bajaj
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed.
S&F Electronic fan regulator, 120W, modular type, 2 module and connecting electrically, ISI Marked, complete all as specified and as directed by Engr-in-Charge.
S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down old u/s material, complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.
S&F in replacement of LED street light fitting 30/35/45 Watt 230 V AC outdoor type with high pressure die cast aluminum housing with surge protection, toughed glass, and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, including 1.20 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts, nuts & washers, complete all as specified and as directed. Make : Bajaj / Philips/ Havells as approved by GE.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Philips/Havells/Bajaj
Supply, fixing, connection & testing of 36 watt LED luminaire 600 mm x 600 mm, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.incld taking down old existing light fitting complete all as specified and as directed . Make : Philips/Havells/Bajaj
Supply and Fixing LED miror light 8/10 watt, .incld taking down old existing light fitting complete all as specified and as directed . Make : Philips/Havells/Bajaj
Taking down old serviceable fan and refixing in same position after painting including connectoin from celing rose to fan connector all as per directed by Engr-in-Charge
Supply and fixing wall mounting fan with 3 blades, electronic regulator and accessories, 230 V, 400 mm sweep, BEE, 3/5 star rated with brushless direct current motor (BLDC) connecting up with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan (earth wire to connected to fan hook), ISI marked, complete all as per directed and specifed Make :- Havells/Orient/Usha.
S&F exhaust fan, heavy duty steel body, AC single phase 300 mm sweep, 900 RPM complete with louvers including cutting / making holes in wall fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg.-in-charge. Make : Havells/ Bajaj/ USHA
S&F exhaust fan, heavy duty steel body, AC single phase 450 mm sweep, 900 RPM complete with louvers including cutting / making holes in wall fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engg.-in-charge. Make : Havells/ Bajaj/ USHA
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider Note : MCCB & MCB shall be measured and paid for separately.
S&F MCCB, 'A' Frame, thermal adjustable magnectic setting, Ics = 75%, 25 kA, 415V, 100 Amp, 4 Pole with over load and short circuit protection, suiatble for item No.161.00, (ISI marked), as in replacement, complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB SPN 240 volts rating from 40 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB SPN 240 volts rating from 63 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F MCB single pole 240 volts rating from 6 to 32 Amps, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, as in replacement, including taking down old u/s materialcomplete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
S&F in replacement of Prewired distribution board (sheet metal enclosures) SPN 8 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, including taking down old u/s material, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F in replacement and connecting and testing of bollard light fitting IP65 rated inverted pyramid tripod type LED 10W bollard with soft 360° light distribution along with connected items and mounting arrangement complete all as specified and directed .Make : Bajaj/Philips/ Havells
S&F in replacement of FRP pole mounting box weather proof BSES type of size 300mm x 200mm x 105mm hinge type with connector 4 way mounted inside complete all as specified and as directed.
S&F in replacement sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade, as per IS code 694 with valid CML No. & ISI Marked, of size 6.00 Sqmm and one run of 6.00 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 6.00 sqmm cable with one run of 6.00 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.
M&L for disconnecting and taking down carefully the existing old serviceable geysers of any storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldgs) and transporting the same to AGE E/M Central Jodhpur Store Yard for carrying out repair work such as over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete all as specified and as directed. Note : - (i) Quoted rate is deemed to be inclusive of replacement of 2 Nos braided hose flexible pipe for hot & cold water (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts,nuts,washers of suitable size, with grouting.
M&L in replacement for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron earth lead wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Supply and laying in trenches or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 3.5 Core 35 Sqmm in service connections, as in replacement, including taking down old u/s cable, complete all as specified and as directed. Note : Earth work and PCC work measured and paid separately
Supply and laying in trenches or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 2 Core 10 Sqmm in service connections, as in replacement, including taking down old u/s cable, complete all as specified and as directed. Note : Earth work and PCC work measured and paid separately
M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed by Engg.-in-charge. Note :- Punned thickness shall only be measured and paid.
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed.
M&L for galvanised steel tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed. Make : Prakash/ Tata/ Jindal
S&F exhaust fan, made of sturdy Engineering plastic body, complete with louvers shutter, 250 mm sweep, 1200 RPM, 230 V 50 Hz, AC single phase, complete with louvers including fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed. Make : Havells/ Bajaj/ CG
S&F in replacement of Prewired distribution board (sheet metal enclosures) SPN 8 way with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 protection, 240 volt, including taking down old u/s material, complete all as specified and directed by Engr-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
S&F in replacement sub main wiring with two runs of 4 sqmm PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade, as per IS code 694 with valid CML No. & ISI Marked, of size 4.00 Sqmm and one run of 2.050 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 4.00 sqmm cable with one run of 2.50 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.
NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 53 (R),54, 55(R), 56 & 57 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount
M/s Ajay kumar Garge
M/S KAUTILYA GARG
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .