PROCURMENT OF FURNITURE/INFRASTRUCTURE REQUIREMENTS

Movable Partition

P & F Cabin Doors Providing and fixing Cabin Doors sturdy and matching with partitions having overall size 800X2400mm, including hardware like hinges, handles and dead lock, etc.(Without Door closer) DOOR FRAME :Aluminium extruded section having overall size 80X35X1.25 mm in curved contour with overlap pocket to mount door. It should have pocket to encapsulate wooden board for mounting Hinges and Lock. Door : Laminated (both side) Flush door with 30 mm core thickness covered with 3mm MDF board shall be provided including 4 no heavy duty hinges and dead lock. Edges of the door should be covered with 2mm PVC edge bands glued on door with hot melt glue on automatic edge banding machine after preparing the edge on milling machine.

TERRACE DOOR

Providing storage rack ready to assemble type, self-standing, over hanging or partition mounted storage system having 450 mm. Ready to assemble type, Self-standing storage unit having depth 450mm as per requirements with following details: Carcass and shelves: Made from 18mm pre laminated/post laminated panels of 16 mm BWR calibrated ply confirming to IS 303 covered with 0.8 mm laminate on both side glued with PUR glue, 0.8mm thick PVC edge bands glued with hot melt Glues on auto edge banding machine. All panels should be interchangeable to facilitate assembly at site. The shelves are connected with body through adjustable shelf supports. Back Panel: 3mm high pressure compact sheet both side laminated hold in slit formed in the body. Shutters: Made from Flat laminated Plywood confirming to IS 303 of 16mm BWR calibrated ply confirming to IS 303 covered with laminate on both side glued with PUR glue, with 2 mm thick PVC edge bands glued with hot melts Glues on auto edge banding machine with pre milling attachment, Hinged with concealed auto clip-on system "Blum", "Grass" or "Hettich" make OR top sliding mechanism with 25 x 25 mm aluminium extruded channels and Top mounted laterally guided ball bearing blocks. KD fittings: 8 mm x 45 mm concealed bolt with 15 mm eccentric cranks, 8 mm jute dowels, 75 x 50 mm M.S. brackets, etc. complete. Drilling and boring work is done on Multi drill machine in KD-32 system. All mounting holes are notched in all axis simultaneously in single reference. The maximum span between two adjacent holes should not be more than 96 mm.

Virtual Autopsy Room

Virtual Autopsy Room

Outdoor Crime Scene Area

VR ROOM

P & F post laminated Work Top with mounter overall size 1200/1500/1800 /2100 X 750 - 1050 mm as per requirements, made from 25MM HDHMR laminated board both side 1mm laminated. All edges are covered by 2 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. MS Brackets are provided to mount with Partition or Gable end. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work is done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Kit Demo Room

Gable end F type Leg made from 40X40 MS section with concealed joineries and Spacers OR Gable Ends made from Tapper and Slant fabricated from 2mm sheet with powder coating and mounting flange, in Powder coating finish.

Kit Demo Room

Tie frame for supporting Gable ends and Modesty in bottom frame of work table made from 40X20X1.6mm Box section of CRC, ERW, MS section with mountings for interconnection with Gable ends, Top and Modesty brackets.

Kit Demo Room

Pre-fabricated KD Panels: Providing and Fixing Pre-fabricated Plywood KD panels: Pre Laminated/Post laminated Plywood, 16mm thick BWR calibrated ply confirming to IS 303 covered with lamination, on both sides, . All the edges are covered with matching 2/0.8mm thick PVC edge bands glued with hot melt glue on CNC controlled through feed edge banding machine with pre-milling operation. KD fitting: Entire unit is assembled through 8mmX45mm concealed bolt with 15 m eccentric cranks, 8mm wooden dowels, etc. complete drilling and boring work is done on CNC Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts.

Kit Demo Room

Providing and fixing Roller blinds as per approved make as per suggested shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric: screen classic 5% Fabric value: 465 gsm, Thickness: 0.65 mm Fabric to be as per approved sample. All the work completes as per the detailed drawing, mock-up sample and instruction of Architect/EIC.All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mock-up sample approved by the Architect/ EIC.

Animation Room

Virtual Autopsy Room

Providing and fixing .15mm thick GARWARE, 3M OR EQUIVELLENT film on glass partition as per approved BY ENGINEER INCHARGE.

Animation Room

Terraces

Virtual Autopsy Room

Sofa 2-Seater: Providing and fixing in position of the 2-seater sofas as per the drawing. It shall be made up of synthetic leather with the rubber wood frame. Seat foam shall be urethane foam with silicon fill and form shall have density of 31-33 kg/cubic cm and webbing material shall be s-spring. It shall have dimensions 1400W X 920D X 820H in mm complete as per design, drawing and as per specifications / additional specifications & as directed by Engineer-in-Charge.

Waiting Lounge & Living/Drawing Room

Centre Table: Providing and fixing glass top rectangular top centre table as per the drawing. It shall have overall size 750mm(W)x500mm(D)x400mm(H). The under structure of the table shall be made of BWR calibrated ply confirming to IS 303 covered with 1mm lamination with wooden texture and water proof paper. Top glass shall be 10mm thick. The accessories used in the table shall be metal alloy and stainless steel complete as per design, drawing and as per specifications / additional specifications & as directed by Engineer-in-Charge. Basic cost with GST Rs 8000/00

Waiting Lounge & Living/Drawing Room

Mesh Back medium chair - Supply and installation of approved make size W 660 X D 600 X 950 H with fabric upholstery on Pu Foam Seat, Adjustable head rest and arm rest, adjustable lumbar support, self-adjustable mechanism with 4 locking position with nylon caster and star base, nylon star base for extra load carrying capacity, The chair include pneumatic seat height adjustment, tilt adjustment for back and also with two pair of caster, as per design given by the architect and approved by the engineer in charge.

Kit Demo Room & Living/Drawing Room

indoor & outdoor crime scene

Providing and fixing of size Planter Box - Size 400x400x400mm and as per architect’s design.

indoor crime scene Area

Providing and fixing high density super soft 35mm thick artificial grass flooring on terrace area of solarbrite or equivalent make or as directed by Engineer_in_charge.

Open Terrace

Double Bed- Indoor Crime Scene Area 1830(L) x 1600 (D)x350 mm (H)Bed Structure (without storage) consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Side rails of 18mm thick prelaminated plywood panels with all side edgeband.

indoor crime scene

Study Table - Indoor Crime Scene Area Dimension: 1200mm (L) x 600mm (D )x 750mm (H) Top made of 25mm th. pre-laminated HDF Board. Legs & modesty panel made of 18mm th. Prelaminated Plywood Panels. Fixed drawer unit with 3 drawers. Central locking, anodised finish handles."

indoor crime scene

Providing & Fixing 3 mm thick Poly Vinayle Clorine Flooring (PVC) with preparation of base, fixing with hitex,rdex endura or equivelant including rolling with 5 kg roller and making the surface bubble free all complete (make:- wonder floor, solarbrite, hego)

virtual autopsy room

indoor crime scene

crime scene kit demo room

VR Room

AR Room

Waiting Lounge

Outdoor Crime Scene Area

Wall Painting two coats with plastic emulsion paint of approved brand and manufacturer on new wall surface to give an even shade including two coats of Birla or Asian acrylic lapy (putty) & one coat of primer of approved brand including thoroughly brushing the surface free from mortar dropping & other foreign matter and sand papered smooth.

virtual autopsy room

virtual autopsy room

virtual autopsy room

virtual autopsy room

virtual autopsy room

virtual autopsy room

crime scene kit demo room

crime scene kit demo room

crime scene kit demo room

VR Room

VR Room

AR Room

AR Room

Waiting Lounge

Waiting Lounge

Outdoor Crime Scene Area

Providing & Fixing 12mm thick Toughened Glass Door With Required Accessiories

Main Entry Exit Door