Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹49.9 L
Closing Date
8 Jun 2026, 3:00 pmClosed
Yes (up to 3 members)
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
120 days
Expenditure
Capital (Works)
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case the balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of Part I of GCC, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
For tenders having advertised value more than Rs 10 crore wherein eligibility criteria include bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender. The available bid capacity shall be calculated as under: Available Bid Capacity = [A x N x 2] - 0.33xNxB Where, A = Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender), taking into account the completed as well as works in progress. N= Number of years prescribed for completion of work for which bids have been invited. B = Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the date of inviting of tender. Note: (a) The Tenderer(s) shall furnish the details of - (I) Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) for calculating A, as per GCC format (ii)Existing commitments and balance amount of ongoing works with tenderer as per the prescribed Performa (Form F-3) of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started up to the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (I) and (ii) above should be duly verified by Chartered Accountant. (b) In case if a bidder is JV, the tenderer(s) must furnish the details of (i) Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) by each member of JV for calculating A in prescribed Performa and (ii) Existing commitments and balance amount of ongoing works with each member of JV either in individual capacity or as a member of other JV as per the prescribed Performa ( Form F4) of Railway for statement of all works in progress and also the works which are awarded to each member of JV either in individual capacity or as a member of other JV but yet not started up to the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. (c) Value of a completed work/work in progress/work awarded but yet not started for a member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above-mentioned bid capacity in the tender under consideration. (d) The arithmetic sum of individual "bid capacity" of all the members shall be taken as JV's "bid capacity". (e) In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily. (f) The available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria/tender require
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note : Work experience certificates from private individuals shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work means: Any RI or EI or CLS or ABS or IBS work involving Indoor & Outdoor work (Cable laying & termination)."
2 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of Part I of GCC , addressed to Sr.DFM/RJT, Western Railway, Rajkot division -360001and shall be valid for a period of 90 days beyond the bid validity period. (3) In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (I) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii)The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before the closing date for submission of bids (i.e. excluding the last date of submission of bids) (iii)Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non-submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv)The Bid Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted, should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi)The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid Security for the Tender No.___________________" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right-hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii)If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Design, Supply, Installation, Programming, Testing and Commissioning of Electronic interlocking systems and indoor/outdoor S&T work at Vavaniya, Dahinsara, Barwala Road & Bhaktinagar stations of Rajkot Division.
SnT_W_RJT_BQ_26_01
SnT_W_RJT_BQ_26_01
Open
Works - General
12 Months
Rajkot, Gujarat
₹0
₹49.9 L
8 Jun 2026
16 May 2026
25 May 2026
281 items across 3 schedules · ₹18,84,96,045.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | "Design, manufacture and supply of Hot Standby Architecture Electronic Interlocking (El) system i.e. Distributed or Centralized as per requirement of zonal railway, complete as per RDSO specification and as per attached technical requirement & tentative approved Signalling Plans & Diagrams. This include Central Processing Equipment , Interface Equipment, All Interfacing Relays suitable for El, In-built event Logger, interconnecting cables and Jumper wires, Required power supply converters for El equipments, Housing for El equipments & relay racks , fuses , screw less disconnecting type terminals, fixture mounting arrangements, Industrial grade maintenance Terminals (43"" LED or higher size with UPS minimum 1 hr back up with Printer) and other necessary accessories to make the El system functional as per approved signalling plan. All items shall be supplied as per, per functional bit/station for functioning of E l . Technical Requirement: 1. No of Bits Each station. 2 Architecture-Minimum 2 out of 2. 3. Non vital I/O- can be used only for accessories where SIL-4 condition required. 4. Station less than 200 routes- RDSO/SPN/192/2019 Ver.2.0 with latest a m e n d m e n t . 5. Station greater than 200 routes RDSO/SPN/203/2011 Ver1 or latest. 6. Provision of addition soft repeater relays (ECRs, NWKR/RWKR. TPRs etc. ), required to picked up in EI system to enable direct interface with Kavach system ver. 4.0 or latest in future. Supply of 10% Essential spares of the El equipments subject to minimum one of each type mainly consisting of processor, cards/ module, interface relay, DC-DC Convertors, Moxa switch, OFC Connectors, ete. Item wise detailed break up with unit and quantity to be) provided in separate annexure (The quantity involve | 10% spare). Note: Rate does not include cost of VDUs and Embedded PC. Dual operator Industrial Grade VDU panel and Embedded PC will be taken separately. " | Per Functional Vital Bit | 780.00 | 83,238.19 | 6,49,25,788.2 |
| 2 | Portable workstation for Data input & configuration with necessary software/ programs / Accessories, simulation and functional testing, diagnostics, and troubleshooting and commissioning of EI system. A suitable table and chair of a reputed make Godrej or superior shall be supplied by the contractor. Note: The specification of the portable workstation shall be as per the Technical specification given in Annexure or higher version as approved by Engineer In-Charge. All the required software should be uploaded Licensed CD should be given along with the software. (Name of the reputed firm and technical specification shall be written in tender documents.) | Set | 6.00 | 1,47,350.87 | 8,84,105.22 |
| 3 | Instruments and Tool Kits required for Trouble Shootingand repair of hardware and software for the El system should be supplied for stations as per schedule EI item above. This includes tools required for El maintenance sorts of crimping, insertion, removal. General purpose | tools like screwdrivers, spanners, PCB extractor, temp. Controlled soldering iron, wire cutter, nose pliers, etc. Measuring instruments with carrying case/ holders/ | cabinet for technicians/ J.E. for testing, Maintenance and repair at the site). Each set comprises the following: - 1. Crimping tool for all types of special cable assembly used in El system. 2. Insertion tool for all types of special | cable assembly used in El system. 3 .Removal tool for | all types of special cable assembly used in El system. 4. Digital multimeter (Fluke 111 or better) 5. Steel cabinet/ | Almira, Size: 1980mm height, 915 mm width and 485 | _mm depth (Godrej Make or superior) of good quality to store | tools, spare cards and documents.6. Clamp Earth Tester make and model. | 7. Clamp Current Meter make and model. | Set | 4.00 | 1,30,201.33 | 5,20,805.32 |
| 4 | Supply of completions ST/LT/TOC in original tracing along with AutoCAD copies in Pen Drive and six set copies after approval. (Upto four line station) | Numbers | 4.00 | 790 | 3,160 |
| 5 | Supply of Circuit Diagrams consisting wiring/Logic diagram, contact analysis, fuse detail, Input/output bit chart, VDU diagram, Interface in AutoCAD in Pen Drive and Six set of Copies after approval. (Upto four line station) | Station | 4.00 | 29,615 | 1,18,460 |
| 6 | Supply of Completion SIP in Original tracing along with Auto CAD copy in Pen Drive and Six set copies after approval. (Upto four line station). | Numbers | 4.00 | 818 | 3,272 |
| 7 | Supply of diagrams consist of Floor Plan of Relay Room, Battery Room, Power Equipment Room, Data logger room, Power Supply Diagrams along with power supply calculation, Earthing Diagram, Power panel diagram, IPS wiring diagram, Auto change over diagram, Block circuit wiring diagram, Digital Axle counter wiring diagram and all other relevant drawing in original tracing along with AutoCAD in Pen Drive and six set copies after approval. (Upto four line station) | Station | 4.00 | 2,961 | 11,844 |
| 8 | Supply of final Cable Route Plan as per laid cable duly measured as pe extant policy of WR along with Auto CAD in Pen Drive and Six set copies after approval. | Station | 4.00 | 1,580 | 6,320 |
| 9 | Data logger system 1024 Digital and 32 Analog inputs for Railway S&T installation As per spec. IRS: S-99/2006 (Amdt-3) or latest with E1 modem. Central Monitoring Unit (Hardware Configuration as per Annexure) with UPS minimum 06 hrs battery backup and required Software tools. This also includes the supply of one no composite computer & printer table (Godrej workstation table) for keeping the Processor module and one no Godrej make operator chair model PCH7001 or superior. 1024 digital and 32 analog inputs. | Numbers | 4.00 | 6,30,312.5 | 25,21,250 |
| 10 | Failure Analysis & Fault Diagnostic software for data logger of 1024 digital inputs /4096 digital inputs. | Set | 4.00 | 52,451.4 | 2,09,805.6 |
| 11 | Failure Analysis System or Central Monitoring Unit with Printer. As per technical specification IRS: S-99/2006 (Amdt-3) or latest. The specification of Failure Analysis System should be got approved from the Engineer in charge before supply. The Specification of Failure Analysis System shall be as per technical specification given in contract Agreement or higher version as approved by Engineer' In-Charge. (Technical specification shall be provided in tender documents.) | Numbers | 4.00 | 2,87,336.91 | 11,49,347.64 |
| 12 | Provision of T-Networking/Dual card E1 to Serial Port (RS-232) convertor suitable to insert in the data logger /FEP euro rack for Networking to the Data Logger equipments. This includes supply of all equipment accessories required for the purpose. | Set | 8.00 | 29,692.62 | 2,37,540.96 |
| 13 | 750 VA Off line UPS with battery backup 3 Hours for' Failure Analysis System as approved by Engineer in-charge. | Numbers | 4.00 | 33,329.05 | 1,33,316.2 |
| 14 | Main Signal Post Tubular 140 mm Dia, 3.6 Mtr Length as per IRS: S-6/81 or Latest & RDSO Drg. No. SA-24625 (Advance). | Numbers | 24.00 | 8,062.02 | 1,93,488.48 |
| 15 | Main Signal Post Tubular 140 mm Dia, 4.6 Mtr Length as' per IRS: S-6/81 or Latest & RDSO Drg. No. SA-24625 (Advance). | Numbers | 30.00 | 8,199.23 | 2,45,976.9 |
| 16 | 1. Cl Base (As per IRS S-10 & RDSO Drg. No. 2011/M With latest assembly). 2. Pinnacle. 3. Ladder Assembly, as per RDSO Drg. No. SA-23156, with Base, Ladder Guards, Platform, Front Maintenance Platform, MS Supporting bracket to Support Ladder. 4. Signal Front Staging Complete Assembly for CLS Unit. 5. Signal back staging as per extent WR Practice. | Set | 54.00 | 3,251.33 | 1,75,571.82 |
| 17 | Supply of signal no plate as per Drg no CSTE Drg No. CSTE/6186 or latest. | Numbers | 92.00 | 615.59 | 56,634.28 |
| 18 | Offset brackets for Main Signal, made of tubular steel, outer diameter 140 mm, thickness of pipe 4.5 mm. horizontal length of pipe 545 mm & vertical length of pipe 324 mm with fixing arrangement on Main Signal post as per Drawing No SVW/554/G/R or latest.. | Numbers | 13.00 | 4,439.28 | 57,710.64 |
| 19 | Junction route indicator unit 1way as per Drg. No. RDSO SA 23401 suitable for LED Signal Lighting Unit & as IRS: S-66/84 amndt-1or latest. | Numbers | 5.00 | 21,050.52 | 1,05,252.6 |
| 20 | Junction route indicator unit 2 way as per Drg. No. RDSO SA 23402 is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1 or latest. | Numbers | 5.00 | 20,990.76 | 1,04,953.8 |
| 21 | Junction route indicator unit 3 ways as per Drg. No. RDSO SA 23403 is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1 or latest. | Numbers | 2.00 | 28,167.55 | 56,335.1 |
| 22 | Calling ON Signal Unit with Brackets & Fixing accessories. Calling On Signal Unit shall conform to RDSO Drg no 24351(Adv.) Alt1 suitable to LED Signal Lighting Unit. | Numbers | 9.00 | 2,669.43 | 24,024.87 |
| 23 | Position Light Shunt Signal Unit Complete with Post (made of GI Pipe of 80 mm Diameter Medium Class IS Spec. No. IS: 1239 Pt. 1/1990) Base, Hood, and Cover, etc. as per Drg. No. SA-23840, Signal Number Plate, suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item). | Numbers | 9.00 | 4,530.07 | 40,770.63 |
| 24 | Point insulation Complete set as per RDSO Specification IRS: S- 40/84 for Switch bracket, Split-Stretcher bar & Gauge tie plates (52 Kg/60Kg as per site requirement). | Numbers | 50.00 | 1,345.93 | 67,296.5 |
| 25 | Gauge Tie plate nylon insulation as per RDSO Drg No: T- 10372Alt2, T- 10368, T- 10371Alt2, T-15083/88/Alt2 & T- 11690/Alt2 and to the spec IRS: S-40/84 with latest amendments as applicable. | Set | 50.00 | 1,503.68 | 75,184 |
| 26 | Track feed battery chargers, 110V AC input, 2 to 6/10 V DC Output; as per Specn. No. IRS.S 89/ 2025 ver. 2.0 or latest with latest amendments. Charger shall be suitable for charging 80 AH battery. | Numbers | 75.00 | 3,523.27 | 2,64,245.25 |
| 27 | Choke Coil for Single Rail Track Circuit on 25 KV 50 Hz AC Electrified Section as per Spec No IRS S 65/1983 with latest amendments. | Numbers | 150.00 | 2,129.53 | 3,19,429.5 |
| 28 | Low maintenance Lead acid secondary cell 2V/80 AH (Track feed Battery), shelf mounting type conforming to IRS:S- 88/2004 or latest (uncharged). | Numbers | 300.00 | 2,213.81 | 6,64,143 |
| 29 | Adjustable Track Feed Resistance disc type 30 ohms as per RDSO Drg. No. SA 20166/M (Adv.) with latest amendments (with Phenolic molded base). | Numbers | 75.00 | 978.46 | 73,384.5 |
| 30 | Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks. | Numbers | 400.00 | 1,120.65 | 4,48,260 |
| 31 | GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding. | Kg | 900.00 | 68.17 | 61,353 |
| 32 | Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS: S- 17/75 & RDSO Drg No. S-69/M. | Numbers | 800.00 | 6.04 | 4,832 |
| 33 | PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanized steel wire rope 6 mm Dia (6x19 stranded wire with a steel core of 6 mm Dia) sheathed with PVC 2mm wall thickness, the overall thickness is 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material should not be used. | Kilometre | 10.00 | 5,553.17 | 55,531.7 |
| 34 | Hydrometer, Exide make or similar for measuring the specific gravity of Battery Graded acid with mounting stand in location Boxes. | Numbers | 50.00 | 282.46 | 14,123 |
| 35 | Medium Class G.I. Pipes to IS: 1239 (Pt.)-2004 or latest; 100mm dia. (int. Dia) 3.65 mm thick or above with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes. | Running Metre | 240.00 | 1,170.28 | 2,80,867.2 |
| 36 | Supply of Tools Kit for Digital Axle Counter (Multi section/Single section). (MSDAC comply to the RDSO spec. No. RDSO/SPN/176/2013/Ver.3 or latest and manufacturer's specification and SSDAC comply to the RDSO/SPN/177/2012,Ver.3 or latest respectively). The tool kit shall be minimum equipped with the following equipments: (i) All mechanical tools shall be of reputed make like Taparia/Bosch etc. (ii) Digital multimeter true RMS type of make Fluke 189 or similar reputed make with probe set - 1 No. (iii) Adjustable torque wrenches 25-135 N/mtr with 13 mm and 19 mm inserts- 1 set (iv) Set of spanners screw drivers and soldering iron - 1 set (v) Dummy wheel - 1 No. (vi) Marking Jig - 1 No. (vii) Adapter card - 1 No. (viii) Extended wired socket to interface with diag No. stic plug - 1 No. (viii) Selector switch on panel base - 1 No. (ix) DAC EC card puller etc. | Set | 4.00 | 1,44,043.4 | 5,76,173.6 |
| 37 | Miniature, Plug-in Type, DC Neutral Line, Non AC Immunized Relay, Style QN1, 24 V DC, 8F-8B/12F-4BContact, Code ABCDF/ABCDE Spec: BRS: 930; IRS S 34; IRS S 23. | Numbers | 350.00 | 4,284.48 | 14,99,568 |
| 38 | Miniature, Plug-in Type, DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F-8B/12F-4BContact, Code ABDGH/ABDFH Spec: BRS: 931A; IRS S 34; IRS S 23; IRS S 60-78. | Numbers | 350.00 | 5,576.04 | 19,51,614 |
| 39 | DC neutral line relay QNA1K (QSA3), AC immune, DC neutral line 24V, 12F/4B contacts, complete with plug board, retaining clip and connectors. Conforming to BRS930A, (as applicable) IRS: S34 amend 6 or latest & IRS: S23 amend 1 or latest. | Numbers | 70.00 | 5,859.41 | 4,10,158.7 |
| 40 | Relay, AC Immune, Plug-in-type, style "QNA1K" ACI DC Neutral line, 24V DC 1000 Ohms 6F.6B contacts, front contacts metal to carbon and back contacts metal to carbon. Complete with plug board, retaining clip and connectors confirming to IRS: S34, IRS: S23 include amend, BRS931A. As per RDSO Specification No. STS/E/Relays/UEA (PI) Dt.30/05/97. Annexure II. The interlocking pin code CDEKY. | Numbers | 350.00 | 5,525.31 | 19,33,858.5 |
| 41 | Universal AC ECR of Q series, type "QECX61" suitable for AC LED all signal aspect, Front & back contact Metal to Carbon type complete with plug board retaining clip & connectors conforming to Spec STS/E/Relays/AC Lit LED Signal/09/2002, BRS: 941A, IRS: S34 and IRS: S23 amend to be included (as applicable). | Numbers | 60.00 | 5,613.1 | 3,36,786 |
| 42 | Miniature, Plug in Type, M to C,DC Neutral ,Track relay, ACI, Style QTA2, 9 Ohm, 2F-1B contact, Code - FGHKX Spec : BRS :939-A & 966 (Appx-F2) & IRS : S-23, S-34 & 60 amend to be included. | Set | 100.00 | 4,878.9 | 4,87,890 |
| 43 | Miniature, Plug in type, M to C, AC immunized, DC biased Track Relay, 2F-2B contacts, style QBAT-9 ohms. Code ABEJX Spec:- RDSO/SPN/84 Ver. 2 Amd 1, IRS: S 23-88 Amd.1, IRS: S 34-68 Amd.6, IRS: S 60-78 Amd.1 | Numbers | 25.00 | 5,393.68 | 1,34,842 |
| 44 | Relay fail safe electronic time delay device mounted on Q series relay base and cover with fixed timing of 60/120 second confirming to IRS:S:61/2000(ver.1.0) (Amdt. 3) or Latest,IRS:S:34 and IRS:S:23 amend to be included (as applicable). The Interlocking code for this unit shall be AFGKY. | Numbers | 30.00 | 5,242 | 1,57,260 |
| 45 | Key Lock Relay working on 24V DC, AC immunize with different ward combinations (Three ward plates to be supplied with each relay). Key ward shall be specified by engineer incharge as per requirement. | Numbers | 28.00 | 9,743.97 | 2,72,831.16 |
| 46 | Sealing wire used for sealing of signaling relays & equipments. | Numbers | 350.00 | 190.74 | 66,759 |
| 47 | Lead Tablet for sealing wire used for sealing of signaling relays & equipments. | Numbers | 350.00 | 226.78 | 79,373 |
| 48 | Supply of self supported aluminum flat step ladder (conforming to ISI) 5 ft. height. Ladder should be self-supported and it should be made up of rust proof Aluminum of Min 16 SWG. No plastic hinges/Step support should be used. | Numbers | 8.00 | 3,089.9 | 24,719.2 |
| 49 | Supply of Smart Cabinet/Rack for Housing of Various S&T equipments like KLCR, Reset Box, IPS Indication Panel, CA VA Unit for FACS, SP AU for Point Reversal, Crank Handle, Quad Cable Earth Sensing Unit along with Fixing of KLCR (KLCR will be provided by Railway) as approved by Site Engineer. similar reputed make. | Numbers | 4.00 | 58,030.77 | 2,32,123.08 |
| 50 | Cable termination racks as per Drg. no. CSTE 5004, 5005, 5006 complete along with fitting arrangements and also with arrangement for fixing four 8-way terminal strips/ Screw less terminals on each row having 16 such rows. Supply of 8 way terminal strips/ Screw less terminals not covered under this item. Cable termination rack shall be Powder Coated. | Numbers | 35.00 | 24,008.12 | 8,40,284.2 |
| 51 | Earth Leakage Detector as per RDSO/SPN/256/2025 ver. 2.0 or latest with latest amendments. The basic detector unit shall comprise of 12 channels, for use on signaling circuits of 110V AC/DC and/or 60V/24V/12V DC as ordered by purchaser. If the detector is required for less number of channels, dummy plates shall be provided. For additional requirement add on /expendable cabinet may be used. The voltage specified shall be provided with + 25% and - 10% tolerance. | Numbers | 4.00 | 1,51,574.89 | 6,06,299.56 |
| 52 | Cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4 & Spec No IRS S 75/2006 with the latest amendment. The fuse block shall be suitable for round-head type voltage fuses. This also includes the supply of equivalent no of ND type Fuses of 2A/4A/6A/10A/16A capacity as per specification IRS S- 78/2006. | Numbers | 300.00 | 129.41 | 38,823 |
| 53 | HRC fuses block complete with 2A fuse link as per IS 9224/79. | Numbers | 300.00 | 70.56 | 21,168 |
| 54 | PPTC fuse 12V GP 16-400 (2A) for TF/TR circuit, make Raychem, Epcos, Siemens. | Numbers | 400.00 | 10.42 | 4,168 |
| 55 | Round head type non deteriorating type low voltage cartridge fuse as per Spec No IRS/S/78/2006 with latest amendments 2A/4A/6A/10A/16A capacity. | Numbers | 300.00 | 57.21 | 17,163 |
| 56 | Fuse auto changeover system for use in Railway Signaling System as per RDSO/SPN/209/2012 ver. 2.0 with latest amendments. One Automatic changeover Unit comprises 24 nos. of external Non-Deteriorating Type or 'G' type fuses from 4 Amp to 10 Amp capacities which are in signaling circuits. The system shall have 6 cards with a monitoring arrangement of 4 fuses in one card. | Each Module | 8.00 | 51,953.78 | 4,15,630.24 |
| 57 | Fuse auto changeover system for use in Railway Signaling System as per RDSO/SPN/209/2012 ver. 2.0 with latest amendments. One Automatic changeover Unit comprises 32 nos. of external Non-Deteriorating Type or 'G' type fuses from 0.6 Amp to 4 Amp capacities which are in signaling circuits. The system shall have 8 cards with a monitoring arrangement of 4 fuses in one card. | Each Module | 30.00 | 29,743.63 | 8,92,308.9 |
| 58 | Disconnect Terminal Block, Screw less type, 4-wire front entry (Two in-put & Two out-put) The color will be decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3). as per RDSO Spec. No. RDSO/SPN/189/2004 ver. 3.0 With latest amendments. Note: Make to be approved by Railway before supply. | Numbers | 12000.00 | 58.53 | 7,02,360 |
| 59 | Supply of End plate 2.5mm/0.091 in thick as per site requirement. For disconnect terminal. | Numbers | 2000.00 | 11.07 | 22,140 |
| 60 | Supply of End Stopper 10mm/0.0394 in width as per site requirement. For disconnect terminal. | Numbers | 2000.00 | 10.86 | 21,720 |
| 61 | Supply of Carrier Rails for above 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per site requirement. For disconnect terminal. | Numbers | 280.00 | 113.88 | 31,886.4 |
| 62 | Supply of 4 connection points single potential through screw less terminal block for 6 Sq.mm - 35 Sq.mm , 4 connection points 284-621/624 or superior, suitable for power cable connection. | Numbers | 100.00 | 270.84 | 27,084 |
| 63 | Fire Extinguisher CO2 type (capacity 5 kg or above). | Numbers | 30.00 | 6,814.05 | 2,04,421.5 |
| 64 | SMC Booklets of each station register for SMC register minimum 100 pages. Performa of SMC will be provided by rly. (1 Register to be read as 1 Number). | Numbers | 100.00 | 120.12 | 12,012 |
| 65 | Pad locks Godrej make, Hardened NavTal 7 lever, 65mm Dia with common key or similar product having same feature & technical data. | Numbers | 100.00 | 196.79 | 19,679 |
| 66 | Miniature 'E' type lock complete with keys as per RDSO Drg. No. SA 3473, 3373 & spec. IRS(S) 30/64. Ward to be specified by Engineer - in - charge. | Numbers | 32.00 | 2,081.52 | 66,608.64 |
| 67 | Earth Electrode as per Drg. No. CSTE / 6091. | Numbers | 140.00 | 2,798.99 | 3,91,858.6 |
| 68 | Supply of RCC Earth Chamber as per attached drg. | Numbers | 260.00 | 649 | 1,68,740 |
| 69 | ARA Terminal blocks with links made of PBT Spec No.s/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4. | Numbers | 9500.00 | 75 | 7,12,500 |
| 70 | Steel Plain Almirah with 4 adjustable slaves Size: 1980mm height, 915 mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand will be specified by Engineer in-charge. | Numbers | 8.00 | 17,036.67 | 1,36,293.36 |
| 71 | Office Chair makes Godrej CH-7B or similar of reputed brand will be specified by Engineer in-charge. | Numbers | 32.00 | 2,655.97 | 84,991.04 |
| 72 | Office Revolving Chair Godrej Make Model No.9u02r Bravo Or Similar of reputed brand will be specified by Engineer in-charge. | Numbers | 12.00 | 8,188.3 | 98,259.6 |
| 73 | Office table with laminated top with three drawers on left hand side and one locker on the right hand side. Olive brown with duplicate keys. Make: Godrej Model T-9 or Similar of reputed brand will be specified by Engineer in-charge. | Numbers | 8.00 | 16,052.54 | 1,28,420.32 |
| 74 | SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/945 dtd 03.03.2011 (Half app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply. | Numbers | 9.00 | 51,998.06 | 4,67,982.54 |
| 75 | SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/948 dt. 26.04.2011 (Single app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply. | Numbers | 32.00 | 59,855.98 | 19,15,391.36 |
| 76 | Supply of Modular Location Box as per WR CSTE Drg No. 6285 Modular Type SS 304 Full Location Box. It includes Angle frame Relay frame fixture , earthing Rod , Drawing Board , Lock etc. | Numbers | 42.00 | 87,452.33 | 36,72,997.86 |
| 77 | IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8 | Numbers | 80.00 | 5,388.67 | 4,31,093.6 |
| 78 | PVC insulated Railway Signalling multi-core Indoor Cable 60core x 0.6mm Dia conforming to IRS:76/89 (Amd3) or latest. | Kilometre | 1.00 | 1,74,705.11 | 1,74,705.11 |
| 79 | PVC insulated Railway Signaling multi-core Indoor Cable 1mm x 24 mm x 1 mm Dia conforming to IRS:76/89(Amd3) or latest. (24core) | Kilometre | 2.00 | 1,83,153.7 | 3,66,307.4 |
| 80 | PVC insulated Railway Signaling multi-core Indoor Cable 1 mm x 40 mm x 0.6mm Dia conforming toIRS:76/89(Amd3) or latest. (40core) | Kilometre | 1.00 | 92,180.73 | 92,180.73 |
| 81 | Single core multi-strand wire 0.5 sq.mm. (16 conductor each dia. 0.2mm), as per IRS 76/89 (Amd3) or latest. | Kilometre | 24.00 | 5,548.54 | 1,33,164.96 |
| 82 | Flexible cable (Power wire), multi-strand copper conductors cross section 1x6 Sq.mm.( 85 conductor each diameter 0.30 +/- 0.01) as per IS 694/1990 with insulation thickness of 0.80 mm nominal conductor resistance 3.30 ohms/km and test parameters are as per IRS(S)76/89 amend 3 or latest. | Kilometre | 5.00 | 33,366.21 | 1,66,831.05 |
| 83 | Flexible cable (Power wire), multi-strand copper conductors cross section (1x16Sq.mm).101 Conductors each diameter 0.45 +/- 0.01 as per IS 694/2010 with insulation thickness of 1.2mm nominal conductor resistance 1.127 Ohms/Km and test parameters as per IRS(S) 76/89 amend 3 or latest. | Kilometre | 4.00 | 1,36,063.55 | 5,44,254.2 |
| 84 | Flexible cable (Power wire), multi-strand copper conductor's cross section 25 Sq. mm (0.4x196) as per specn. IS 694/2010 with latest amendment, and test parameters as per IRS(S) 76/89 amend 3 or latest.. | Kilometre | 2.50 | 1,32,505.12 | 3,31,262.8 |
| 85 | Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 ver. 1.1 amend 1 or latest anti-rodent & anti-oxidant and non- flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. . One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. Color -Bright Orange; Min Weight = 4kg. Test Check by Consignee & Sample check by JAG officer. | Numbers | 150.00 | 1,912.2 | 2,86,830 |
| 86 | Dual tone bell/buzzer with flasher arrangement 25W horn, ( Make of any ISI approved firm) working voltage as per circuit design. | Set | 23.00 | 8,475.45 | 1,94,935.35 |
| 87 | Road warning Flasher kit for LC gate as per circuit design | Set | 14.00 | 1,665.03 | 23,310.42 |
| 88 | Supply of Battery Charger self-regulating floor mounting type with 230V AC single phase input and output 24 V DC, 20A to specn. IRS-S- 86/2000 with latest amendment for Axle counter application. (Amdt. 4). | Numbers | 9.00 | 34,732.4 | 3,12,591.6 |
| 89 | Supply of Digital Earth Resistance tester three terminal type with LED display, 1999 count, KOICO latest model or any reputed make approved by engineer in-charge. | Numbers | 2.00 | 13,356.84 | 26,713.68 |
| 90 | Supply of Digital Insulation Tester 100V/250V/500V range of Model Rish insu 20 Make :RISHABH or MECO or similar. | Numbers | 4.00 | 8,240.4 | 32,961.6 |
| 91 | Digital low current clamp meter to measure current leaks (parasitic draw down to 1 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make - Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | Numbers | 4.00 | 18,194.34 | 72,777.36 |
| 92 | Digital Multimeter of Fluke 2 latest model industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 seconds or Superior as approved by Rly. | Numbers | 4.00 | 44,774.52 | 1,79,098.08 |
| 93 | Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 M, and frequency up to 1 MHz with a set of leads & carrying case. make Motwane /Stanley /Fluke/ Megger. Latest model as approved by Rly. | Numbers | 4.00 | 12,853.59 | 51,414.36 |
| 94 | Supply of Standard Tools set. As per Annexure | Set | 4.00 | 35,317.28 | 1,41,269.12 |
| 95 | Road Measuring Cycle, made of Aluminum with 05 digit counter, foldable with the bag. | Numbers | 4.00 | 4,515.84 | 18,063.36 |
| 96 | Supply of Cable Fault locator as per specification attached. Make: Stanley Communication Model Sidekick Plus Kit Standard (1155-5001) or equivalent. | Numbers | 2.00 | 5,78,945.76 | 11,57,891.52 |
| 97 | Supply of in-built GNSS based cable route tracer with 10W, 500mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP andRTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200GS or similar. | Numbers | 2.00 | 13,87,100 | 27,74,200 |
| 98 | Supply of Electronic LC Gate Telephone system with Voice Logging Facility as per RDSO Spn /TC/51 /2021 Rev. 2.0 or Latest, consisting of 1 Master telephone, 6 Slave Telephone along with Modified Surge Protection and Line connection unit and 24V DC Power supply with MF Battery, (To be supplied by/from RDSO approved Firms only.). | Set | 7.00 | 1,03,656.27 | 7,25,593.89 |
| 99 | VDU Panel cum Block instrument table complete of reputed make (for 2 nos. VDU & 2 nos. Block instruments) as per technical specification. It includes any modification to it if required by Engineer-in-charge at site. | Numbers | 4.00 | 45,586.6 | 1,82,346.4 |
| 100 | Movable File Storage System (Compactor) 2-Bay Mechnized Drive Type, Make-Methodex,Godrej Interio, Storack solutions, Myriad, Model-Methodex MS2-12MC NS B or better. | Set | 4.00 | 2,89,077.55 | 11,56,310.2 |
| 101 | Supply of Axle counter cable conductor's Earth resistance Sensing unit. Microcontroller based for 12 nos conductors with metering facility for one conductor at a time. | Numbers | 48.00 | 38,059.31 | 18,26,846.88 |
| 102 | Supply of VF tapping transformer as per IRS-TC 22/2021 Ver. 1.1 or latest. 1120:1120, 1120:600, 470:1120 ohms. | Numbers | 16.00 | 901.8 | 14,428.8 |
| 103 | Usb to Opto convertor or eathernet to Optical convertor or reputated make and approved by Rly. | Pair | 10.00 | 15,000 | 1,50,000 |
| 104 | 2 Aspect LED Signal Housing made of SS- 304 (Min 1.6mm thick) duly powder coated in black, with background plates, prewiring for LED Signals, Terminal strip, Reflective strips on rear side, ventilation and Pole Mounting & locking attachment, suitable for RE area. The design shall confirm to IP-54 as per unit description as Width 260mm, Depth 200mm, Height 650mm as per Drawing No.- DRM/SG/1021 (2A) of STAINLESS STEEL (SS-304) 2 ASPECT COLOR LIGHT LED SIGNAL UNIT | Numbers | 28.00 | 27,406.03 | 7,67,368.84 |
| 105 | 3 Aspect LED Signal Housing made of 55- 304 (Min 1.6 mm thick) duly powder coated in black, with background plates, prewiring for LED Signals, Terminal strip, Reflective strips on rear side, ventilation and Pole Mounting & locking attachment, suitable for RE area. The design shall confirm to IP-54 as per unit description as Width 260mm, Depth 200mm, Height 875mm as per Drawing No.- DRM/SG/1021 (3A) of STAINLESS STEEL (SS- 304) 3 ASPECT COLOR LIGHT LED SIGNAL UNIT. | Numbers | 25.00 | 28,601.13 | 7,15,028.25 |
| 106 | 4 Aspect LED Signal Housing made of SS- 304 (Min 1.6 mm thick) duly powder coated in black, with background plates, prewiring for LED Signals, Terminal strip, Reflective strips on rear side, ventilation, Pole Mounting & locking attachment, suitable for RE area . The design shall confirm to IP-54 as per unit description as Width 260mm, Depth 200mm, Height 1100mm as per Drawing No.- DRM/SG/ 1021 (4A) of STAINLESS STEEL (SS-304) 4 ASPECT COLOR LIGHT LED SIGNAL UNIT. | Numbers | 3.00 | 31,938.4 | 95,815.2 |
| 107 | Supply of Standard 19" Rack Mountable LER(Label Edge Router) , IP- MPLS Router with Redundant DC power feed-48V DC nominal, equipped with interfaces: 2 x 10G (optical) SFP+ Ports along with 2 nos. of 10G single mode Bi-directional SFP 40 Kms+LC Modules, 4 x 1GbE (Optical) interface along with 4 Nos of 1GbE Single Mode SFP 10km Modules and 4 x 1GbE (Copper) interfaces & Modules and slot for 16 x E1 (G.703), {supply of 16 E1 card is not included in this item and is catered in separate item}, Mounting kit with all necessary accessories & Software, Perpetual Licenses. As Per RDSO Document No.STT/TAN/IP- MPLS/2020 Version 3.0 or latest as per specification of Tender document. | Numbers | 2.00 | 4,94,350.95 | 9,88,701.9 |
| 108 | "Supply of factory crimped CAT 6 UTP Patch Cord 3 Mtrs. as per specification of Tender document." | Numbers | 24.00 | 293.23 | 7,037.52 |
| 109 | "Supply of Single Mode Patch Cord length 3 meters (SC-APC) as per site requirement as per specification Tender document." | Numbers | 48.00 | 163.06 | 7,826.88 |
| 110 | "Supply of 10 pair 0.5 mm annealed copper conductor PVC insulated switch board Telephone cable as per specification of Tender document." | Metre | 500.00 | 49.07 | 24,535 |
| 111 | "Supply of 20 pair 0.5 mm annealed copper conductor PVC insulated switch board Telephone cable as per specification of Tender document." | Metre | 500.00 | 89.94 | 44,970 |
| 112 | Supply of Armoured Optical Fiber Cable , 6 Core , Single Mode as per specification of Tender document. | Metre | 1000.00 | 29.73 | 29,730 |
| 113 | "Supply of three core PVC insulated flexible power cable in over all PVC Jacket as per specification of Tender document." | Metre | 1500.00 | 32.88 | 49,320 |
| 114 | Supply of STP CAT-6eCable as perspecification of Tenderdocument. | Metre | 2400.00 | 25.7 | 61,680 |
| 115 | Supply of UTP CAT-6eCable as perspecification of Tenderdocument. | Metre | 610.00 | 24.36 | 14,859.6 |
| 116 | "Supply of PLB HDPE Duct of Size 40/33 mm Outer and with all accessories as per RDSO Spec No RDSO/SPN/TC/45/2013 Rev 2 amend 3 or latest as per specification of Tender document." | Metre | 6000.00 | 59.75 | 3,58,500 |
| 117 | "Supply of 10/100/1000 Base-T Copper Ethernet Transceiver SFP Module with all accessories as per specification" | Numbers | 12.00 | 7,457.97 | 89,495.64 |
| 118 | Surge Protection Device for LAN Networks as per technical specifications as per specification | Numbers | 12.00 | 3,663.71 | 43,964.52 |
| 119 | "Supply of Maintenance free VRLA Batteries set of 48V-200AH and its standard installation as per latest RDSO Specification. Each battery set shall be of 24 batteries of 2V-200 AH as per specification of Tender document." | Set | 2.00 | 85,012.31 | 1,70,024.62 |
| 120 | "Supply of SMPS Based Battery Charger suitable for both low maintenance & Maintenance free batteries & its standard installation as per RDSO Specification RDSO/SPN/23/99(Ver.4) amend 1 or latest as per specification of Tender document." | Numbers | 2.00 | 1,28,804.23 | 2,57,608.46 |
| 121 | "Supply of Single Mode Patch Cord length 10 meters (SC-APC) as per site requirement as per specification of Tender document." | Numbers | 36.00 | 746.78 | 26,884.08 |
| 122 | Supply of RJ 45 connector suitable for STP/UTP Cable (D-Link)as per specification of Tender document. | Numbers | 500.00 | 2.7 | 1,350 |
| 123 | Supply of 10 Sq. mm PVC insulatedSingle core Multistrands copperconductor (Red/Black/Green) as perIS:694/2010 or latest, as perSpecification No. IRS:S-76/89 or latest.Colour of the wire which is required willbespecified by the Engineer incharge. (Inspection by representative of Dy.CSTE/W/RJT) | Metre | 900.00 | 103.87 | 93,483 |
| 124 | Supply of 35 Sq. mm PVC insulatedSingle core Multistrands copperconductor (Red/Black/Green) as perIS:694/2010 or latest, as perSpecification No. IRS:S-76/89 or latest.Colour of the wire which is required willbe specified by the Engineer incharge. (Inspection by representative of Dy.CSTE/W/RJT) | Metre | 100.00 | 287.14 | 28,714 |
| 125 | Double Walled Corrugated (DWC)HDPE Pipe with associated collarsetc. as per RDSO Specification No.RDSO/SPN/204/2011 Ver. 1.1 and amend 1 or the latestanti-rodent & anti-oxidant and non-flame propagating type in 6 metersstraight length and of size 120 mmouter die,& 103.5 mm inner dia.(The manufacturers and suppliersmust produce valid IS licenses andshould be certified under ISO 9000and shall submit a copy of thecertificate). One of the followingcoupling arrangements should alsobe supplied with each pipe as perthe site requirement. 1) Suitablesnap-fit coupler with rubber 'O-Ring2) Spacers 3) Tees 4) Bend, 5)End-cap (The total quantity ofabove items is equal to no. of pipessupplied.) DWC pipe shall bemarked at every 1 mtr length insuch a way that manufacturer'sname, vender name and year ofmanufacture can be easilyidentified. | Numbers | 24.00 | 2,146.91 | 51,525.84 |
| 126 | Supply of Power Supply DistributionBox with MCB/Fuse as perspecification and requirement givenby Site Engineer, Make 3M,SNATEL, ABB. | Numbers | 6.00 | 24,496.8 | 1,46,980.8 |
| 127 | Supply of VF tapping transformeras per RDSO spec IRS TC 76/2021 or latest suitable forunderground quad cable circuits,magneto telephone, emergencycircuits ETC. (II) Impedance470:600 | Numbers | 24.00 | 1,062.42 | 25,498.08 |
| 128 | Supply of OFC Maintenance tool kitas per TEC Spec No- G/OMS/01/01April 94 or latest. One setconsisting of the following- (1)Philips/Fluke/Motwani DigitalMultimeter 4-1/2 digit with LCDDisplay- (1 No). (2) Rotary ductcutter for cutting ducts(withreplaceble blade) -(2 No). (3)Utility Knife -(2 No). (4) Cableslitter -(1No). (5) Tubing cutter forcable armour -(1No). (6) Bare fibreadaptor -(1No). (7)Miller/Fujikura/proskit highprecision stripper for fibre buffer -(3 No). (8) Pocket Cleaver Fujikura(CT - 08) -(1No). (9) Mechanicalsplice joint set (1 set consisting of6 nos). (10) Ceramic scissor CSI -(2 No). (11) LC,FC & SC adopterwith 0 dB loss -(15 No). (12)Optical fibre terminal V groove -(2No). (13) Earth resistancemeasuring instruments with allaccessories range from 0.1 to 10Ohms. (14) Megger (A) 500V- 1No,(B) 100V -(1No). (15) Loose tubestripper -(2 No). (16) Cordstripping plier -(1No). (17) KroneTool -(1 No). (18) Isopropyl Alcohol- (1L). (19) Napkin- (500 No). (20)LC & SC attenuator with 5/10dBloss - [(20 No (10 -10 each)]. (21)Laser Distance Meter 50 m Range-(01 No). (22) Visual Fault Locator{pen type (range-30 km)}- (01No). (23) Fiber Protection Sleeves{40 mm & 60 mm }- (100 No each)(24) SC to APC Connector-10 No. | Numbers | 1.00 | 1,58,674.14 | 1,58,674.14 |
| 129 | Supply of Tool kit for telecommaintenance with a small sizecanvas bag with the followingitems:- (1) Combination Plier 8".(2) Long Nose Plier (Round nose)6", (3) Wire Striper Plier 6", (4)Screw Driver set ( 5 pieces), (5)Hexa with frame 12", (6) DoubleOpen-end D spanner set ( 6 to 32mm), (7) Adjustable Spanner set8", (8) Ball pin Hammer (200 gm),(9) Side Cutting Plier 6", (10)Soldring iron (Soldron make orsimilar) (11) Torch cell LED ( 3cell)(Eveready) Geep or similar), (12)Auto Ranging Digital Multimeter (Mecco/Rishabh or similar ) (13)Krone Tool (Krone make or similar)(14) Wago Slotted Screwdriver,Insertion & Extraction Tool-1 Set.(15) HDMI,RJ 11 & RJ45 CableContinuity Tester- 01 Set. (16)Quad/PIJF cable Cable ContinuityTester/ buzzer- 02 no. All Toolitems 1 to 9 ofTaparia/Gedor/Jhalani make orsimilar . | Numbers | 2.00 | 15,570.19 | 31,140.38 |
| 130 | supply of optical to ethernet media converter for single mode single fiber as per RDSO specification RDSO/SPN/TC/103/2013 rev 3 or latest of make Dlink/ TP link/ Tenda | Pair | 2.00 | 3,021.63 | 6,043.26 |
| 131 | Supply of basic material toconstruct unit maintenancefree earth as per RDSO Specs.No RDSO/SPN/197/ Ver. 1 or latest and conforming to RDSODrg.No.SDO/RDSO/E&B/001dtd.25.06.2025 Ver. 3.1 or latest. It consist offollowing: (a)Copper bondedsteel electrode of 3.0 m long,17.2 mm dia with copperbonding thickness of minimummacrons and UL listed andmarked = 1 no. (b) Earthenhancement material suppliedin sealed bags of minimum 10kg = 3 nos. © Copper strip of150x25x6 mm, to terminateearth rod = 1 no. (d) Copperstrip of 300x25x6 mm (MEEB)= 1no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multistrand single core PVCinsulated copper cable as perIS: 694 for connecting mainearth electrode to MEEB in theequipment room in duplicate.(minimum 10 meter)(iii)Supply of 16 sq. mm multistrand single core PVCinsulated copper cable as perIS: 694 for connecting MEEB toSEEB and SPD to MEEB(minimum 10 meter ) (iv)Supply of 10 sq. mm multistrand single core PVCinsulated copper cable as perIS: 694 for connecting variousequipments to SEEB (v) Supplyof copper lug sleeve for 3/16cable Inspection: RDSOInspection. | Set | 36.00 | 8,539.93 | 3,07,437.48 |
| 132 | Thermo shrink Universal Jointing kitfor Quad Cable (for straight joints)as per RDSO spec IRS/TC-77/2012 amend 3 With latest Amd. | Numbers | 36.00 | 3,341.07 | 1,20,278.52 |
| 133 | Supply of G.I. Pipes 100 mm dia medium grade engraved on pipe as per spec. no. IS 1239 of 1990 or 1992 or latest with sockets and fittings. (Jindal, Tata, make ) | Metre | 72.00 | 622.43 | 44,814.96 |
| 134 | " Supply of Surge protection device (SPD) 4- Pole, 5 V versions as detailed in Annexture A. similar to model no MDP- 4 D-5-T of OBO make. Make OBO, Phoenix, ABB or DEHN. Detailed specification Annexture ""A""" | Numbers | 24.00 | 5,259.12 | 1,26,218.88 |
| 135 | Supply of PVC rigid pipe 25mm dia with ISI mark & reputed make as per specification of Tender document. | Metre | 1100.00 | 14.5 | 15,950 |
| 136 | Supply of 25x3 mm barecopper strips in theequipment room as pertechnical specificationsattached with tenderdocument. | Metre | 120.00 | 902.06 | 1,08,247.2 |
| 137 | Copper bus bar 200x25x6mm (SEEB) to terminateearth rod as perSTS/E/TAN/3006 ver 3.1 or latest. | Numbers | 12.00 | 557.68 | 6,692.16 |
| 138 | Copper bus bar of300x25x6mm (MEEB) as perSTS/E/TAN/3006 ver 3.0 orlatest | Numbers | 12.00 | 507.74 | 6,092.88 |
| 139 | Copper bus bar of150x25x6mm (SEEB) as perSTS/E/TAN/3006 ver 3.1 or latest | Numbers | 12.00 | 285.47 | 3,425.64 |
| 140 | Supply of ultra isolationtransformer 230V/230V-1.5KVA with MOVR protection oneither side to provide Xprotection and supply of crowbar surge protection circuitfor 48v DC side to provide Yprotection as per technicalspecifications attached withtender document. | Numbers | 8.00 | 13,193.87 | 1,05,550.96 |
| 141 | Supply of VOIP PHONEwith power adapter andfeatures like Hold,transfer, forward, 5-wayconference, call park,call pickup, shared-call-appearance(SCA)/bridged-line-appearance (BLA),downloadablephonebook (XML, LDAP,up to 2000 items), callwaiting, call log (up to800 records), as pertechnical specification ofTender document. (withstandard installation asper site requirement). | Numbers | 24.00 | 6,468.46 | 1,55,243.04 |
| 142 | Executive revolving chairwith high back chair, fivelegs stand dually chromefinish cushion on seatand back with goodquality ofrexine/tapestry withhydraulic and fittingssturdy in design, as approved by Engineer in charge before supply | Numbers | 5.00 | 7,528.99 | 37,644.95 |
| 143 | Office table withlaminated top with threedrawers on the left- handside and one locker onthe right-hand side.Olive brown withduplicate keys. MakeGodrej or Similar to areputed brand, as approved by Engineer in charge before supply | Numbers | 5.00 | 24,457.65 | 1,22,288.25 |
| 144 | Steel Plain Almirah with4 adjustable slaves Size:1980mm height, 915mm width, and 485mmdepth. Make GodrejStorewelPlain Large orSimilar of reputedbrand, as approved by Engineer in charge before supply | Numbers | 2.00 | 21,124.73 | 42,249.46 |
| 145 | Supply of Phenolic laminatedSheet, grade P3 in standardsize of 1220 X 1220 x 12 mmas per spec. No IS 2036 of1995 or latest. Test report ofmanufacture to be supplied. | Numbers | 8.00 | 4,965.85 | 39,726.8 |
| 146 | "Supply of 24 fibre OFC Spliceenclosure FIBRE OPTIC FIBRESPLICE STRAIGHT JOINTENCLOSURE ( SJC ) completewith all accessories as perRDSO/SPN/TC/68/2014, rev. 3or specs for 24 fiber ofc cablewith later amendment.Accepted Make / Brand - MicroEngineering. " | Numbers | 36.00 | 2,477.83 | 89,201.88 |
| Schedule total | ₹11,11,94,736.81 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Section2of4stnEI.pdf
ATTACHMENT
Section3of4stnEItender.pdf
ATTACHMENT
Section4of4stnEITender.pdf
ATTACHMENT
WWA31..08.23.pdf
ATTACHMENT
BRL10.02.2023_1.pdf
ATTACHMENT
DAC31.07.2023.pdf
ATTACHMENT
BKNG07.08.23.pdf
ATTACHMENT
PolicyNo-03.2024.pdf
ATTACHMENT
20.3.2026PolicyCircularforimplementationofEIBitConfigurationforDataLoggerExceptionSMSGeneration_1.pdf Policy1
ATTACHMENT
20.3.2026PolicyCircularforimplementationofEIBitConfigurationforDataLoggerExceptionSMSGeneration_1.pdf
ATTACHMENT
consigneeinspectionletter.pdf
ATTACHMENT
DIRTYCLEANSEGREGATION-1.pdf
ATTACHMENT
Earthingandsurgeprotectionsystemsforsignallinginstallation.pdf
ATTACHMENT
EarthingofQuadCableatintermediatelocationboxes.pdf
ATTACHMENT
EIpolicies.pdf
ATTACHMENT
Foundationformainsignalpost.pdf
ATTACHMENT
IntegratedCRPpolicy21.pdf
ATTACHMENT
IPsdrawing.PDF
ATTACHMENT
JointProcedureOrderforresettingtheDigitalAxleCounteronWR..pdf
ATTACHMENT
letterofcablecut07.07.2023.pdf
ATTACHMENT
Policy-ModifiedmeasuresonBerthingTrackCircuit.pdf
ATTACHMENT
RevisedTANonearthing-Bonding-surgeandlightningProtectionsystemforSTinstallation.pdf
ATTACHMENT
Sparekeyuse02052023.pdf
ATTACHMENT
WR-JPO-DisconnectionReconnectionProtocols.pdf
ATTACHMENT
Section1of4stnEI_1.pdf
ATTACHMENT
CorrigendumtoPolicyNo-207-2016dated07-07-2016TypicalDrawingsforAutoresettingcircuitsforMSDAC1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .