Notified Area Office Ankleshwar

Name of Work : Construction of Notified Area office building at NA, GIDC, Ankleshwar.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Clearing and grubbing road land including uprooting of rank vegetation,

grass, brushes, shrubs, wood, trees and saplings of girth upto 300mm

1 removal of stumps of trees cut earlier and disposal of unserviceable 0.40 80243.79 Hectare

materials with all lead and lift as directed by Engineer in charge.

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 1482.00 117.08 Cumt.

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

3 sorting out and stacking of useful materials and disposing off the 1482.00 129.81 Cumt.

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

4 sorting out and stacking of useful materials and disposing off the 15.00 142.52 Cumt.

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Extra for additional depth more than 5.0 m for excavation for foundation

including sorting out and stacking of useful materials and disposing off

the excavated stuff upto 50 m lead.(B) Dense or Hard soil

Filling available excavated earth in trenches. plinth, sides of foundations

etc. in layers not exceeding 20cm. In depth consolidating each disposited

layer by ramming and watering etc. complete as directed by Engineer in

Providing and laying Rubble soling with sand in foundation below PCC

and watering and compacting the same etc. completed..

Filling in foundation and plinth with murrum or selected soil in layers of

8 20cm. thickness including watering, ramming and consolidating etc. 2161.00 289.06 Cumt.

Providing and laying PCC 1:2:4 (1-cement : 2 coarse sand : 4 M/c stone

aggregate 20 / 40mm nominal size) in foundation concrete / floor concrete

9 incl. machine mixing, ramming, consolidation & curing etc. incl. cost of 280.00 3053.25 Cumt.

form work if required etc. complete at all levels as directed by Engineer in

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete at all levels for RCC FOOTING

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete COLUMN UP TO GROUND FLOOR

LEVEL & FIRST FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete COLUMN AT ALL FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc.complete FOR RCC BEAM UP TO GROUND

FLOOR LEVEL & FIRST FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc.complete FOR RCC BEAM AT ALL FLOOR LEVEL

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete at all levels for RCC SLAB at GROUND

FLOOR & FIRST FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete for RCC SLAB AT ALL FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete at all levels for RCC SILL and LINTEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete at all floor levels for RCC STAIRCASE

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete for RCC WALL UP TO GROUND FLOOR

& FIRST FLOOR LEVEL

Providing and laying controlled cement concrete M-250 for RCC work as

per detailed drawings including centering, shuttering (Only Fresh Ply),

machine mixing, vibrating, scaffolding, curing, centering having double

or more height wherever required & finishing etc. but excluding cost of

reinforcement etc. complete at all levels for RCC WALL AT ALL

Providing and supplying TMT Bar FE 500D reinforcement for R.C.C.

work including cutting, bending, binding, and placing in position

complete at all floor levels for all floors, including providing Factory

Applied Fusion Bonded Epoxy Coating (FBEC) to reinforcement bars

with coating thickness not less than 175 microns and up to 300 microns,

conforming to IS 13620:1993 / ASTM A775M standards. The epoxy

coating shall be factory manufactured and factory coated only, and no

epoxy paint/coating shall be applied at site. The item includes testing of

coating at manufacturing plant, loading, unloading, transportation, all

taxes, and all leads and lifts for all diameters of reinforcement bars,

complete as directed by the Engineer-in-Charge (EIC).

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

22 bending, binding and placing in position complete upto floor two level. 94996.00 76.21 KG

(For all Floors)

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

23 percent is recommended i.e one litre 20 EC chemical emulsion with 19 601.00 34.36 Sqmt

liter give 1 % concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Brickwork using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq. Cm. in foundation and plinth in cement

Mortar 1:6 (1-Cement : 6 - fine sand). Conventional in Foundation &

Plinth (Upto 10 ton).

Brickwork using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq. Cm. in foundation and plinth in cement

Mortar 1:6 (1-Cement : 6 - fine sand). GROUND & FIRST FLOOR

Sr. No ITEM QTY. Rate UNIT AMOUNT

Brickwork using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq. Cm. in foundation and plinth in cement

Mortar 1:6 (1-Cement : 6 - fine sand). SECOND FLOOR (Upto 10 ton).

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg / Sq.Cm. in Cement mortar 1:3 (1-

27 Cement:3-coarsesand) with 2 Nos of 6mm Mild steel round bars after 335.00 715.04 Cumt.

every three course embedded in Cement Mortar in Conventional in

GROUND & FIRST FLOOR

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg / Sq.Cm. in Cement mortar 1:3 (1-

28 Cement:3-coarsesand) with 2 Nos of 6mm Mild steel round bars after 18.00 721.04 Sqmt

every three course embedded in Cement Mortar in Conventional in

Half brick thick honey- comb brick work with common burnt clay

building bricks having crushing strength not less than 35 Kg/Sq.Cm. (i)

In Cement Mortar 1:4 ( 1- Cement : 4 - coarse sand) (more than 10 ton)

Providing 10mm thick cement plaster in single coat on brick/concrete

30 walls/ceiling for interior plastering for all floor levels and finished even 1328.00 140.16 SQMT

and smooth in (ii) Cement mortar 1:3 (1 cement : 3 Sand)

Providing 15mm thick Cement Plaster in single coat on brick/concrete

31 wall for interior plastering upto floor two level finished even and smooth 3180.00 192.97 SQMT

in Cement mortar 1:4 (1-cement :4-sand) at all floor level

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing 20 mm thick Water Proof cement plaster for sunk in single

coat on brick / concrete wall for interior plastering up to floor two level

finished even and smooth ( ii )Cement mortar 1:3 ( 1-cement ,3- sand )

and mixing waterproofing materials of approved brand and

manufacture in cement mortar in proportion recommended by the

manufacturer for All Floor.

Providing and laying cement concrete 1:5:10 (1-Cement:5-finesand:10-

34 graded brickbat aggregates 40mmnominal size) and curing complete 85.00 130.48 SQMT

including waterproofing material - for toilet floor at all levels

Providing and laying intergrated cement based proprietary water proofing

treatment of required thickness over the roof including 10mm thick

waterproofing cement plaster in cement mortar 1:3 and CHINA MOSAIC

fitting and finally finishing the surface with white cement slurry and

sloping out terrace slabs with following specification laid to required

slope not flattar than 1:80 (the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finished slope shall not be less

than 45mm including treating the vertical surface of the parapet wall up

to 20cms height above finished level of terracing including finishing the 708.00 1200.00 SQMT

top with joint less water proofing plaster, curring testing etc complete

Rate is including ten years performance of guarantee bond to be given on

stamp paper ( No extra shall be paid for increase in thickness for proper

slope(A)Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing compound

conforming to IS-2645 and 10mm thick water proofing cement plaster in

cement Mortar 1.3 over the RCC slab including cleaning the surface

before treatments.

Sr. No ITEM QTY. Rate UNIT AMOUNT

(B) Laying cement concrete using broken brick bats 25mm 40mm size

with 50% of cement mortar 1:4 (1 Cement : 4 coarse sand ) over 10mm

thick water proofiing cement plaster in cement mortar 1:3 ( 1 cement :3

coarse sand ) admixed with proprietary water proofing compound

conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height including rounding of junctions of

(C) After two days of proper curing applying a seceond coat of cement

(D) finishing the surface with china mosaic pieces laid on 10mm thick

joint less cement plaster of mix 1:3 ( 1 cement : 3 coarse sand ) with

water proofing compound conforming to IS-2645 and finaly finishing the

surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test All above

operations to be done in order and as directed and specified by the

Engineer in Charge.

Providing & laying GVT Vitrified tiles flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including Making

3mm spacer at joint of tiles and fill the spacer with epoxy jointing

material ,finised with flush pointing & cleaning the surface etc complete

selection as directed by Architect/Engineer in Charge.( Size: 1.20Mt. X

Providing & laying GVT Vitrified tiles 9 mm thick in flooring and

Dado laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement. ( Size -

0.60Mt. X 0.60 Mt.) (A) Light Shade etc complete selection as directed

by Architect/Engineer in Charge. make:Sommany,Nitco,Kajariya

Providing and laying 18mm thick polished GRANITE STONE SLAB

flooring ,trade of step ,riser of step Laanding , door sill (umra) on 20mm

(average) thick base of cement mortar 1:6 (1 cement : 6 course sand) laid

38 over and jointed with coloured cement slurry including rubbing and 223.00 2223.21 SQMT

polishing and including making half round moulding to toe of treads etc..

complete as directed by Engineer in Charge.

Providing & fixing 18 mm thick first quality Black Polished Granite

stone approved by Client/Architect for Doors - windows Frame, Lintel,

jambs & sill in cement mortar (1:3) including cutting, fixing in cement

paste with hairline joint, filling the joints with white cement / pigments /

joint filler,rounding of edges, edge polishing & finishing as directed by

the Engineer in Charge.( fixing the granite in one piece )

P/F 18 mm avg. thick double polished(both side) jet black granite slab

for urinal partition incl. making groove in wall and fixing properly in line

& level incl. all cost of materials & labours etc. complete at all levels

Providing & fixing Partly glazed Double leaf Door (laminate

finish)(finished size of door is 61 mm) considering block board flush

door sheet of 35mm thickness covered both side by 12 mm marine ply

IS 710 grade & finished with 1 mm thick laminate(laminate

make:Century,greenlam,Formica )on both sides of shutter and ,nd

having 12 mm clear toughen glass slits (two nos.) as per given pattern &

size with crystal edges in both shutters, fixed with 75 mm x 19 mm

burmateak Patti , rest on Floor spring heavy duty & Top-Bottom fitting

41 for door-pivot. All exposed framing made by Burma teak wood complete 16.00 6948.80 SQMT

with laminate Patti. Finishing with all necessary S.S hardwires like

DOOR S.S Handles 5PHO 2218SS -FPHO 2218 , conceal Door lock

Mortize Body 85x60M S.S , DOOR UK key CYLI,60MM 1CK S.S

KEY M/HL 125 ROSE SS ,cylinders, stoppers, tower bolt, MS nails, SS-

304 screws,,including providing and applying prime coat Asian /Berger

make and two coats of oil painting of Asian /Berger make to the edges

etc. as per details given in drawing and as per instructions of

Architect/Engineer In charge

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and fixing 35 mm thick Flush door shutters , including fixing

1 mm thick exterior lamination over it on both sides, peripheral 2 x 3 cm

moulding patti with colour, with Stainless Steel hinges size - 6" x 1.25",

42 dead lock with 4 key , SS handle size 30 cm Long, SS Tower Bolt 52.00 3497.63 SQMT

(Stoper) size 20cm long, as per detail including one coat of primer and

two coats of oil painting as and where required, pattern and design is to

be approved by the Architect/Engineer in Charge..

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non-toxic additives (maximum toxicity index of 12 for

gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to

spread of flame of Class A category with property of being termite/borer

proof, water/moisture proof and fire retardant. WPC to be laminated with

PVC foil of minimum 14 microns thick of approved design pasted with

hot melt adhesive on both faces of shutter and fixing with stainless steel

butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge. For

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)

44 with colour anodized alluminium frame for ventilation with 5 mm thick 9.00 1175.56 SQMT

frosted glass as details etc complete for Ventilation (work for all the

floors) as directed by Engineer In Charge.

Two track window & Fix window:Providing and fixing window having

extruded aluminum Colour anodized section frame main outer size

x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member

size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

Exterior Texture & Paint :Providing & applying high quality acrylic

modified resin based texture of Dholpur/Red Sand Stone pattern with anti-

algae and UV resistance properties, to be applied as intermediate finish in

desired pattern @ 43.04 kg/10 sqm to form film of 1–1.5 mm thickness,

after scrapping and properly cleaning the surface to remove loose

particles from the plaster surface, followed by applying two coats of

46 suitable exterior acrylic primer over the prepared surface, complete and 370.00 580.00 SQMT

uniform in application, and thereafter top coating with Premium Acrylic

Smooth Exterior Paint with Silicone additives of required shade by two or

more coats @ 1.43 litre/10 sqm, complete as per the direction of

Engineer-in-Charge.Acrylic Smooth Exterior Paint with Silicone

additives of required shade by two or more coats @ 1.43 litre/10 sqm,

complete as per the direction of Engineer-in-Charge.

Providing and applying one coat of water based exterior primer of

approved brand and make as mentioned below on wall surfaces after

thoroughly brushing the surface free from mortar droppings and other

foreign matter. Item includes making the surface even and smooth by sand

papers. Rates are inclusive of all the material and labourers and

scaffolding work, cleaning of the floors etc. required for the work with

weather proof exterior emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete at

all floor level.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing & fixing Steel work,grill work,stair ladders,etc welded in built

up/rolled steel sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of read lead paint. (A)In beams and

48 joists, channels angles Tees, flats, with connecting plates or angle cleats 186.10 9047.86 Quintal

as in main and cross beams. Hip and jack rafters, purlins conneted to

common rafters etc completed as directed by architect / Engineer In

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

49 including cleaning the surface an even shade including cleaning the 570.00 87.81 Sq.mt

surface of all dirt, dust and other foreign matter etc. complete as directed

by Engineer Incharge.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing

sheet fixed with hilti screw and rubber silicon sealer and alluminium strip

of size 50 x 3 mm etc complete as directed by Engineer in charge.

Supplying and fixing stainless steel hand Railing of Grade 304 (16 gauge

thick sections) with glossy finish consisting of 32mm x 32mm size

vertical posts 900 Heigh at maximum spacing @ 750 mm c/c with

suitable cups at top rail of 50 mm x 50 mm & intermediate horiztal rails

3 nos of 16 mm x 16 mm size etc complete at all levels including bending

to required profile. Tungsten insert gas welding & all required

accessories, grinding & labour etc complete as per design fixing with

base slab/concrete or side wall/RCC by hilty or equivalent fastenre and

plates as per Drawing and instruction of Engineer-in-Charge.(work for all

LOUVERS: Providing and fixing aluminium powder coated fixed louvers

made from extruded aluminium sections conforming to IS 733 & IS

with 1.2 mm thick frame and 1.5 mm thick blades, powder coated finish

60–80 micron, including all fittings, fasteners, labour and

installation,scafolding etc complete as per drawing& selection as

directed by Architect/Engineer in charge.

Pargola :Providing and fabricating and erecting GI work Welded angle

posts, racks, for Ladders using structural steel angels and flats, sheets

etc. of approved steel manufacturer as per drawing & design including

53 cutting, welding & fixing hold fast in wall with C.C. & with hot deep 1107.00 105.00 kg

galvanized as per IS-2633/72 and 209 of 1966 or latest amendmentetc&

make etc. completed as directed by EIC.(All materials required for the

work to be brought by the contractor).

Constructing of Cooking platform ( sandwich type ) 80cm high resting

on Kota stone / granite stone in C.M 1:3 with providing and fixing

mm thick rough kota stone at bottom and 25mm thick Polish kota stone/

Granite stone ( single piece ) top and polished kota stone/ granite stone

54 (single piece ) 25mm thick on top with 75mm high machine cut polished 12.00 2484.47 SQMT

Granite round moulded facia patty including polishing etc . complete as

per drawing and specification without stainless steel sink including

necessary cutting for sink & making hole for gas pipe and fixing P.V.C

bend of 25mm dia.

Provinding and fixing 600mm x 450mm bevelled edge MIRROR of

55 superior glass mounted on 6mm thick A.C. sheet or plywood sheet fixed 13.00 833.73 Each

to wooden plugs with C.P. brass screws & washers.

Providing and fixing 200 mm wide, approved quality chicken wire mesh

at junction of brick work and RCC work or two dissimilar surfaces, at all

56 heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before 379.00 251.69 SQMT

applying the plaster, including curing, scaffolding all complete as

Providing & applying a coat of residual petroleum bitumen of grade of

VG-10 of approved quality using 1.7 kg per square metre on damp proof

course after cleaning the surface with brushes and finally with a piece of

cloth lightly soaked in kerosene oil.

58 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 2.00 389.74 Each

59 Providing and fixing in position cowel went to pipes.(C) 100mm dia 18.00 501.87 Each

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(B) 20mm dia.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia.

Providing and fixing ball cock of approved. quality as directed.(B)

Abonite (ii) 50mm dia.

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

68 potable water of following dia. nominal bore tube fittings and clamps 5.00 166.86 Rmt

including making good the wall, ceiling and floor etc. complete.[A]

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm diametre x 210 mm length x

mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm length x

mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing erecting and fixing double coated ISI water tank of required

77 capacity each with all necessary fittings and connection etc. complete on 150000.00 3.95 litre

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(B) 150mm

Providing, laying and jointing (to level or slopes) 160mm diameter PVC-

U SWR pipes (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting conforming to ISI

14735-1999 of ISI (PRINCE / SUPREME / ASTRAL / FINOLEX /

Equivalent) or approved brand for drainage-line fitted in trenches

including excavation for trenches & refilling, Pipe shall be jointed with

each other with rubber lubricant, including necessary fittings such as

bends, shoes etc. including testing of pipe & joints and jointed with

adhessive solvent cement including the cost of all materials etc...

completed as directed by E.I.C. As per make list

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:3 (1- Cement :

3-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished smooth complete including

81 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep 3.00 11029.97 Each

including C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for

150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of

82 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 3.00 522.96 Each

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:3 (1- Cement :

3-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished smooth complete including

83 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep 3.00 19330.39 Each

including C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for

150mm diameter sewer.

(II) Extra rate for constructing B.B. masonry for every additional depth

84 of 0.1M. GR Part thereof over item No.24.27 (I) for depth from 1.50M. 3.00 397.19 Each

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm

85 and painting with two coats of Anti corrosive paint etc. complete. 102.00 203.76 Each

Sr. No ITEM QTY. Rate UNIT AMOUNT

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

86 slabe with 1:2:4 mix (1 cement :2- coarse sand :4-graded stone aggregate 5.00 2932.93 Each

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof

87 beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 5.00 242.39 Each

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

88 slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 4.00 3660.76 Each

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof

89 beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 4.00 264.86 Each

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

90 slabe with 1:2:4 mix (1 cement :2- coarse sand :4-graded stone aggregate 2.00 7180.44 Each

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof

91 beyond 450mm depth for Brick masonry chamber.(iii) for 600mm x 2.00 325.59 Each

Providing and fixing on platform stainless steel Sink glossy ASIS

grade x 1mm thick with over all size 610x460mm & bowl size

560x410x200mm & SS Pillar cock with extention body like JAQUAR

FUS-CHR-29021N including fixing the sink in platform & making good

the same including the cost of PVC waste pipe of 32mm dia. and PVC

waste coupline etc complete as directed by EIC.

Providing and fixing Two way BIB cock with wall flange of genuine

Jaquar ompany brand, in with model no FUS-CHR29041, water tap

brand or approved ISI brand quality, fixing in pieline and testing the

same… etc., complete., as directed by EIC

Providing and fixing wash down water closet European type WC pan

(Wall Hung) like JAQUAR CNS-WHT-961SPP- SIZE

365x545x360MM and P trap distance 23.5 cms with integral P trap

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :

1 find sand) including providing and fixing of 1) Health Faucet hand

94 shower heavy duty with SS braided hose 1.2 MT long pipe to water closet 14.00 20210.00 Each

- JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern

Body with Installations Kit & “S-Type” drain pipe connection set for

Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with

Control Plate Opal - JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -

1151N etc,complete

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and fixing Wash Basin vitreous china table top wash basin

size 560mm x 450 mm in white colour. Like JAQUAR CNS-WHT-903

SIZZE OF 425x340x175MM with single hole for pillar tape with CP or

MS brackets painted white including cutting holes and making good the

same including (1) Providing and fixing SS waste coupling of 32 mm dia

size half theread with 80mm height like jaquar -ALD - CHR-705 for

wash basin with rubber plug (2) Providing and fixing SS bottle trap with

internal partition of 32mm size with 250mm &190mm long wall flange

95 connection pipes and wall flange likejaquar ALD-769 L250X190 of 16.00 13500.00 Each

approved quality with necessary fitting for wash basin (3) Providing and

fixing SS Pillar cock with extention body like JAQUAR FUS-CHR-

29021N with necessary fittings etc. complete (4) Providing and fixing SS

finish Angular Stop Cock quarter turn like Jaquar code FUS-29053 with

necessary fittings (5) Providing and fixing SS finish soap dispenser with

metallic bottle like Jaquar code-ACN-CHR-1135N,Towel ring -jaquar-

CAN-1121BN etc. complete

Providing and fixing Urinal of approved quality including connection

with trap and with integral longitudinal flush pipe.(A) Squating plate

pattern white earthenware size of urinal 370mm x 315x 620 mm.of

jaquar make code no URS -WHT-132530 including (1) Providing and

fixing SS finish waste coupling of 32 mm dia size half theread with

80mm height like jauar -ALD - 709 for wash basin with rubber plug (2)

96 Providing and fixing SS finish bottle trap with internal partition of 32mm 6.00 20756.00 Each

size with 250mm &190mm long wall flange connection pipes and wall

flange like jaquar ALD-769 of approved quality with necessary fitting for

wash basin (3) Sensotronic Concealed Type Flushing Valve Faucets of

auto closing system for urinal like jaquar SNR-STL-51087 of approved

quality and connection with waste pipe trap etc. complete

Providing and fixing Overhead Shower ø105mm Round Shape Single

Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with

Rubit Cleaning System JAQUAR OHS-1709 & Shower Arm Casted

160mm Long Light Body Round Shape for Wall Mounted Showers with

Flange JAQUAR SHA-477 & Wall Mixer 3-in-1 System with Provision

for both Hand Shower and Overhead Shower Complete with 115mm

Long Bend Pipe, Connecting Legs & Wall Flange (without Hand &

Overhead Shower) JAQUAR QQP-7281PM, Towel Rack 600mm Long

without Hangers, Stainless Steel JAQUAR ACN-1181FS approved ISI

brand quality, fixing in pieline and testing the same… etc., complete., as

directed by EIC etc.

98 Providing and fixing U PVC SCH40 for cold water 20 mm dia (3/4)" 55.00 89.00 Rmt.

99 Providing and fixing PVC SWR pipes IS 13592 for Drain - 75 mmdia 5.00 383.00 Rmt.

Providing and fixing PVC SWR P- Trap IS 14735 for Drain -110x110

Providing and fixing Gun metal check or non-return fullway wheel valve.

Providing laying and jointing PVC SWR pipes IS 13592 for Drain -

mmdia it's accessories.

Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing SS finish Angular Stop cock for wash basin like

Jaquar code FUS-29053

Providing and fixing Handicap wash down water closet European type

WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP- SIZE

365x545x360MM and P trap distance 23.5 cms with integral P trap

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :

1 find sand) including providing and fixing of 1) Health Faucet hand

shower heavy duty with SS braided hose 1.2 MT long pipe to water closet

- JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern

Body with Installations Kit & “S-Type” drain pipe connection set for

Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with

Control Plate Opal - JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -

1151N, including grab bar etc,complete

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

106 limpet washer or G.I. limpet washer. filled with white lead complete 93.00 727.13 Sq.mt

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Providing & Plantation of semi carpet Lawn (Selection 1) the scope

includes prepaid ground for planting of lawn, soil spreading, mixing of

soil & manures, rolling the same etc comp. Labour cost for Lawn

Plantation semi carpet Lawn Cost including carting, loading & unloading

107 at site etc and includes required dose of pesticides & Ant termite 214.00 170.00 SQMT

treatment Labour charges for maintenance of semi carpet Lawn including

tools & tackles. including Providing, mixing & spreading fertilizer

Manure ,1 year maintenance etc complete as directed by architect /E.I.C

Providing & Plantation of Green belt trees by digging of pit size 2x2x2

feet, height 10 feet adding soil, farm yard manure , DAP, pesticide,

plantation of sapling. Making proper tree basin & putting proper support

including back filling the trench, watering etc including Providing,

mixing & spreading fertilizer Manure ,1 year maintenance etc complete as

directed by architect /E.I.C

Providing and laying of factory made precast RCC Drain units of

mm length, conforming to Japanese Industrial Standards(JIS) & meeting

IS requirements made by using advanced Japanese technology having

High Performance Self Compacting Concrete of M40 Grade cylinder

strength/ M50 Grade cube strength and using Fe 500/Fe 500D

reinforcement bar designed for 5 T wheel Load wirh 0.2 =m to 3 m earth

109 cushion above it. Product also includes male & female jointing system, 16.00 17404.00 Rmt.

groove for fixing rubber gasket, flange coupling jointing arrangements

and special in-built hanging brackets at appropriate loaction for faster &

safe installation of the product. in no case the casting shall be allowed to

be prepared at site. it should be casted in the stringent atmospheric & pre-

defined condition as per approved QAP by Engineer In Charge.

Providing and Fixing 'U' Shaped Barbed wire fencing on Existing

compound wall top with verical angle of 50x50x6 mmx0.45 Mtr height,

two cross angles 50x50x6 mm x 0.40 Mtr. Length, , two vertivcal angle

50x50x6 mm x 0.45 Mtrhaving 1 Horizontal rows , 2 horizontal rows at

each side of cross angles ,and 2 horizontal rows at each side of verical

angle and 1 horizontal rows at top side of barbed wire.and @ 0.10m c/c

Spiral turns in each 27 mtr in length each 3.00m span and 750 mm

effective dia, horizontal and two diagonal barbed wire rows on each cross

angles incl. cost of barbed wires, necessary GI stapplings, fixing in C.C.

(1:2:4) blocks of 0.35x0.35x0.30 Mtr. size on top of compound wall,

painting angles with one coat of anticorrossive primer and two coats of

enamel paint of approved quality, necessary scaffolding etc. complete as

per the direction of the Engineer in Charge.

Providing and laying and fixing 25 mm thick expansion joint by hydro

111 cell semi rigid UV resistance with high performance laminated closed cell 12.00 745.51 Sqmt

polythene foam joint filler in sheet foam as directed, etc. complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 80mm thick Paver Block duly approved by Engineer in

charge and having required strength M-40. The blocks to be laid between

kerbs to get edge restrain. Rate include cost of all materials, labour,

transportation, equipments and all taxes etc. include sand of 35 mm layer

with proper watering etc. below blocks as directed.

Construction of granular sub-base by providing & laying of compacted

thickness of 230 mm Grading 5th Granular sub base (GSB) in two equal

layers of graded granular material consisting of machine cut black trap

stone aggregate as per grading - V given in table 400-1 of the

specification MORT&H and compactor to the required density with

113 vibratory roller in all seasons as per MORT&H , maintaining the required 250.00 1238.07 Cu.mt.

slope & grade during the operation as approved by the engineer in charge

& watering to the proper moisture content and sprinkled with the help of

truck mounted water tank fitted with suitable arrangement. (fully

saturated having CBR value minimum 30)

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing, laying, spreading and compacting graded stone aggregate to

wet mix macadam spacification including premixing the materials with

water at OMC in mechanical mix plant carriage of mixed materials by

tipper to site, laying in uniform layers (Layer should not be more than

200 mm)with paver in sub base/base course on well prepared surface and

114 camber with Sensor paver consolidation by vibratory road roller to 250.00 1481.54 Cu.mt.

achieve the desired density by using machine crushed chips as per

required gradation mixing with required optimum quantity of water incl

material, labour, plant and machinary and equipment etc. complete by

plant mix method. ( Using mechanical paver ) .

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

115 concret as per approved design and including excavation for fixing in 220.00 361.64 Rmt

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden

116 box, single mounting base frame covered with textured/metallic/white 247.00 481.00 Pt.

front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete cat III

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected on

Metal / PVC / wooden box covered with 3 mm thick

117 PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. 218.00 166.00 Pt.

with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete cat III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame

119 covered with textured / metallic/white front plate modules erected on / in 10.00 598.00 Pt.

wall / ceiling as per pipe erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT III

Sr. No ITEM QTY. Rate UNIT AMOUNT

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories [II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete cat III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

122 frame covered with textured / metallic/white front plate modules erected 78.00 255.00 Pt.

on / in wall / ceiling with following type accessories Cat. III

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with

PVC / Metallic concealed/open box with single mounting base

frame covered with textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site situation

directed by Engineer In charge.

(8) Computer RJ-45 socket Cat.III

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction CAT -

Supply, Installation Testing & Commissioning 5 Mtr. HDMI Interface

128 Cable as per the detailed Specifications supports transmission of 4K 55.00 820.00 Ea.

Signals as per the detailed Specifications

129 Supplying & erecting approved make Dual band wifi Router. 8.00 28290.00 Ea.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate

130 modules erected with necessary connections as per site situation 40.00 159.00 Ea

directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed with FRLS PVC or HFFR

outer Jacket suitable for telephone wiring & confirming to C-DOT

131 erected in existing pipe. of following size of conductors & nos.of 800.00 20.00 Mtr.

pairs. With necessary connections.

[A] Conductor Size 0.5 mm

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard approved with krone

(b) Suitable for 20 pair

Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard approved with krone

(c) Suitable for 50 pair

SITC of Digital / PCM / TDM EPABX System having SMT design,

system with flexible universal slots. Inbuilt Auto attendant facility,

Minimum 15 Nos. conference, Analog extension line, Calling GSM,

E&M line, PRI / EI & VOIP program me through Analog telephone

digital key from Ethernet, public address cord, shall have unrestricted

simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of

Service, Quick Dial-Single Digit dialing of any two external number,

Once only ring device, Chairman / Secretary - Do not disturb Facility,

Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode,

134 Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer 1.00 76314.00 Ea.

while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI

Base ECF, CLI Base routing Internet Ready Port, External Music Port,

Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse

Dialing, External Music Input, Fax Homing, Global Directory Printing

with following capacities [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

[C] No of Extension 48, No of Junctions 9, 8 Port IP Resource in-built,

Port Web base Video Conferencing, No of expandable ports :

Operators Console - 01 Compatible : ISDN

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site situation

directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat.III

Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly -

136 Aluminium film bonded Al. Braids @ suitable coverage 100.00 39.00 Mtr.

overall sheathed with black PVC

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.One wire 16.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.One wire 25.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.One wire 35.00 sq. mm

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

141 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 1475.00 62.00 Mtr.

green colour for earth continuity of

following size.

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

142 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 2250.00 82.00 Mtr.

green colour for earth continuity of

following size.

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS

143 PVC insulated stranded wire of green colour for earth continuity of 500.00 111.00 Mtr.

following size (A) with medium

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following

sizes.(2) 25 mm

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation

(b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation

(b) sheet steel double door

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation

(b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on

150 240 V A.C. system and having breaking capacity 10 KA to be 102.00 111.00 Ea

erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat-III

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(B) 40 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

(b)40 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

155 V,50Hz. having characteristic of quick action & tripping with all 7.00 1950.00 Ea

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed

(i)25Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

156 V,50Hz. having characteristic of quick action & tripping with all 14.00 2213.00 Ea

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed

(ii) 40Amps. DP Cat. III

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable for 100 Amp.

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections. (B) Suitable for 200 Amp.

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. Cat III

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having

Normal current rating 200A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.housing

Supplying & erecting approved make Four Pole 415V change over switch

161 interior for panel mounting with operating mechanism A.C.23 duty 1.00 12120.00 Ea

confirming to IS for (D)200A cat III

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in- charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts,

162 foundation flange - bolts-base Plates, sufficient nos. of hinged 4.00 14755.00 Sq. Mtr.

doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied

with following approved manufacturers with

following size.

(B) The standard companies switch gear shall be used and only

manufacturers at CPRI

approved factory. (i) with 350mm depth board

163 (ii) with 550 mm. Depth 3.00 19196.00 Sq. Mtr.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing

Providing and erecting multifunctional meter suitable for application of

Power monitoring and showing measurement of following Voltage,

Frequency, Apparent energy, Apparent power, Active and reactive energy,

Active and reactive power, Average voltage Vavg, Peak demand power

PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3,

Unbalance current, Power factor and displacement PF (signed, four

quadrant), Calculated neutral current, Active, reactive, apparent energy

165 (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, 3.00 13984.00 Ea

U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand

currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us]

rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network

frequency 50 Hz, Type of network 3P, Display type 7 segments LED,

Display colour Red, Messages display capacity 3 fields of 4 characters,

Display digits 12 digit(s) - 14.2 mm in height

Supplying and erecting approved make suitable panel indicator LED

166 type lamp, lens cover, complete erected with necessary connections. 12.00 43.00 Ea

Providing & erecting L.T. Current Transformer with bar primary 50/5

to 1000/5 ratio 15 VA burden erected in existing CRCA box

duly secured with insulating materials connected to the meter.

Providing and erecting metallic vitrified danger notice board as per

168 language suggested by engineer incharge for MEDIUM VOLTAGE 3.00 69.00 Ea

installation to be erected as per IS-2551.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(7) Blank Plate Single

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded case

circuit breaker having CT ratio & MCCB rating as following along with

shunt trip 220V AC. with all internal connections & complete erected in

existing M.S.housing..

Supplying and erecting, commissioning and testing of Diesel Generating

set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload

for one hour in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

171 lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end 1.00 1611282.00 Ea

exhaust manifold, standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter, necessary

wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected,

with excitation system, capable of delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated

voltage from no load to full load. Both the engine and alternator fitted on

a common fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange coupling

and with floor/wall mounted control panel box comprising of voltmeter

ammeter, selector switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control

panel shall be connected with provided suitable capacity armoured cable

and complete with Acoustic enclosure (canopy) made out of 16 SWG

CRCA Sheet, sound absorbing material Rockwool of 64 density &

mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

mm. The resin bonded rockwool covered from inside the canopy by

perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a

distance of 1 mtr, as per PVCT norms.DG set should have in built fuel

tank capacity of minimum 8 hrs of continous running capacity on full

load . Erection, commissioning and satisfactory testing as per requirement -

with first filling of fuel (minimum up to the 80% of fuel tank capacity),

oil, etc. with guarantee / Warrantee of complete system for Two years. &

with obtaining all necessary certificate from Electrical Inspector. The

Capacity and Ratings of DG sets are as below. (As per new CPCB4+

Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas

Recirculation), CRS (Common Rail Fuel System), DOC (Diesel

Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated

wiring harness connected to ECU .)

(N) Continuous rating of 140 KVA ,BHP not less than 166 BHP

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors

(for mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator

voltage monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low

lube oil pressure High cylinder head 220509temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery

The AMF Panel of following capacity

(D) AMF Control Panel for200 kVA/250 KVA3 phase DG Set

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

173 necessary clamps or in existing trench / pipe of following size of cables. 150.00 87.00 Mtr.

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

174 necessary clamps or in existing trench / pipe of following size of cables. 95.00 106.00 Mtr.

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

175 necessary clamps or in existing trench / pipe of following size of cables. 95.00 130.00 Mtr.

(D) 3 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

178 on wall with necessary clamps or in existing trench / pipe of following 150.00 116.00 Mtr.

(A) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

179 on wall with necessary clamps or in existing trench / pipe of following 160.00 125.00 Mtr.

(B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

180 on wall with necessary clamps or in existing trench / pipe of following 325.00 139.00 Mtr.

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on

181 wall with necessary clamps or in existing trench / pipe of following size 55.00 152.00 Mtr.

(A) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

186 complete with out going tails, insulating tape etc for following size of 2.00 75.00 Ea

(B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

187 complete with out going tails, insulating tape etc for following size of 4.00 189.00 Ea

(F) 3 & 1/2 core 150 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

188 tool & connected to switchgear terminals with brass/cadmium 100.00 6.00 Ea.

plated nut bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

189 tool & connected to switchgear terminals with brass/cadmium 72.00 13.00 Ea.

plated nut bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

190 tool & connected to switchgear terminals with brass/cadmium 8.00 15.00 Ea.

plated nut bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

191 tool & connected to switchgear terminals with brass/cadmium 8.00 20.00 Ea.

plated nut bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure

192 tool & connected to switchgear terminals with brass/cadmium 16.00 61.00 Ea.

plated nut bolts in an approved manner.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane

193 mentioned in test Certificate) & having back filling compound of 15.00 8551.00 Ea

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must

be submitted by Agency.

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent

Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for

194 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 80.00 77.00 Kg.

using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T.

195 OCB / ACB/ Transformer, LT panel board, Motors etc. using copper 20.00 787.00 Kg.

196 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 25.00 787.00 Kg.

Supplying and erecting approved make oscillating type bracket fan A.C.

23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment

197 and rotary tilting device complete with guard, flexible Core plug top 5.00 2509.00 Ea

complete erected with lead wires as directed. CAT II

Providing & erecting Approved make Ceiling Fan with double ball

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep complete

having 3 Aluminium blades, canopy erected complete. [ Make shall be

approved by Engineer in Charge]

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

199 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with 15.00 1929.00 Ea

aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

200 M.S. Pipe down rod erected duly painted for fan complete 36.00 107.00 Mtr.

with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to 50mm length each side

201 and pierced through a 36.00 107.00 Ea

16 Gauge M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet

to cover the fan hook or Fan box.

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

Providing recess in wall or window frame suitable for erection

of Exhaust fan complete with plastering and colour washing to match

204 the colour of the wall or window complete with expanded metal in 20.00 188.00 Ea

order to render the fitting in accessible and the room water-proof.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

205 lamp holders, pf >= 0.5 20.00 111.00 Ea

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts cat - III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

206 Luminaire efficacy> 85 lumens/watt , 85.00 423.00 Ea

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(ii) 12 watts, Surge-2 KV cat III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

207 Luminaire efficacy> 85 lumens/watt , 50.00 423.00 Ea

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(ii) 15 watts, Surge-2 KV cat III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

208 Luminaire efficacy> 85 lumens/watt , 300.00 584.00 Ea

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV cat III

Sr. No ITEM QTY. Rate UNIT AMOUNT

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

209 Luminaire efficacy> 85 lumens/watt , 30.00 218.00 Mtr.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non

integral suitable Driver complete cat III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

210 Luminaire efficacy> 85 lumens/watt , 25.00 871.00 Mtr.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

(D) LED Profile Light

(ii) Minimum 15W -240 LED per meter,(2 wire, IP-65) with non integral

suitable Driver complete CAT iii

Supplying & erecting LED Hanging Profile Light 48W (Tube Light) 4-

Feet, Cool White 6500k (pF >0.98)(Aluminium).

Providing & erecting approved make Fingerprint and card based

Premium Door Controller with LCD and Keypad having following

(A) Optical Fingerprint and Card based Reader (Card personality Module

212 (B) Dot-Matrix LCD and Touch sense Keypad 2.00 22916.00 Ea.

(C) Built-In interfaces like door lock, door sense, exit Reader, Exit

switch, Ethernet RS485, Aux Input & Aux Output Port

(D) 5000 Events, Access Control, Time Attendance, Tamper Detection

(E) 4 LEDS and Buzzer

LED Sign Board letter as per drawing including GIDC Logo" with ACP

background Supplying & erecting with required angle iron/pipe

suppports of one complete signboard having 3.0 mm thick Alluminium

Composite Panel (ACP) fascia on the front side. 1.5" Sq. hollow pipe

structure frame with back side & surrounding 8" cover up by 24/26 swg

213 pre coated CRC sheet. All text symbol made out-of Acrylic cover letters 1.00 16191.00 Sq. mtr

having 3.0" embosed with LED modules & required power supply &

LEDs lighting & Acrylic Cover letters as per text & symbol as directed

by Engineer - In Charge. The size of signboard be of 7 m x 0.9 m looking

to the site area. Make: As per approved by Engineer In charge.

Supplying & erecting dual channel amplifier ,power handling capacity of

180 watt ,four micro phone inputs with independent level control ,built in

FM tuner,with preset memories,USB drive & SD card for MP3 playback

214 ,100v /telephone input with priority and VOX,frequency response-80 Hz 1.00 11018.00 Ea.

to 18k Hz Philips / /distortion less than 1% @ rated power up to

units [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Sr. No ITEM QTY. Rate UNIT AMOUNT

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the

projector should have auto vertical key stone correction of +/- 30 degree

and Manual Horizontal of +/-30 degree. the projector should have optical

lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual

having focal length 16.9mm to 20.28mm. projector should have features

like AV mute slide, quick corner and split function and should support

wireless functionality with inbuilt wifi or wifi dongle. [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 100 inch Self Lock MW (7 x 5) Instalock Slow Retraction

216 Screen, Aspect Ratio-4:3 [Approved by Competent Authority i.e. not 1.00 3773.00 Ea.

Below the rank of Executive Engineer ]

SITC of Rack Mounting kit for the control unit.

217 [Approved by Competent Authority i.e. not Below the rank of Executive 1.00 4767.00 Ea.

Supply & installation of Wireless Portable Bluetooth Conference

SITC of 43 Inch 500 NTS Brightness professional Display with Direct-

Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor.

Operation 27x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB

(2 x 2.0, 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML

Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n Dual

WiFi certificated, BIS, YES CLASS A 3dB margin. (Including Five

year free maintenance with guarantee)

SITC of 55 Inch 500 NTS Brightness professional Display with Direct-

Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor.

Operation 27x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB

(2 x 2.0, 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML

Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n Dual

WiFi certificated, BIS, YES CLASS A 3dB margin. (Including Five

year free maintenance with guarantee)

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

i) 6 A SP 1 Way Switch cat-III

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

ii) 16A SP 1 Way Switch cat-III

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

iv) 6A universal socket shuttered cat-III

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

iv) 6/16 A universal socket shuttered cat-III

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

v) RJ-11 Telephone socket cat-III

Supply & installation of modular type accessories for U PVC snap-on

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

vi) Cat-6 LAN Socket cat-III

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚ C within a hour, The water cooler

should be comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel. ◦

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel.

Supplying & erecting reverse osmosis (RO) water purification

system with M.S. powder coated pedestal frame, prefilter housing

carbon filter suitable buster DC pump, auto low & high pressure

switches with following size of LPH capacity & erected as directed

[E] 200 LPH with 1 phase / 3 phase Raw water pump of 1000LPH @

2.5kg/cm2 (1N0 - Kirloskar/CRI/Lubi) , Dual media filter 10"x54" (1

No), Micron catridge filter 20" x 2.5" - (1No), High pressure pump

1000LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi) , RO Membrane

housing with RO membrane of 40*40 - ( 1 No),RO pressure tube 4" x 1E-

(1No), 0-1200LPH Rotameter-(2 Nos). Recovery Rate 50%.

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base

rectifier & Inverter & sealed maintenance free SMF batteries. The

charger having operating capacity for input 160-270V AC & inverter

having output 230V,50 Hz Ac with 0.8 load power factor with battery,

over/under voltage output with over load & short circuit protection

equipment. The system housed in CRC sheet duly powder coated paint

with following power backup.with MS painted batteries stand, 10%

Overload capacity for momentary load.

(D) 5 KVA with 1Hr Backup

231 (J) 20 KVA 3 - phase with 1Hr Backup 1.00 393391.00 Ea.

Providing & erecting open well type horizontal mono block pump set

with stainless steel body having following specification

(C) 1 H.P. single phase open well motor pump set suitable for 185 LPM

discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with

Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having

[C] For 3 HP 3 phase open well horizontal mono block pump set suitable

for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm

dia delivery pipe

Supplying & erecting approved make Automatic liquid level controller

6A. with sensor testing as per instruction of Engineer in charge on

site complete with wiring connection with existing wires , with

copper conductor from pump to upper and lower tank.

Supplying & erecting approved make motor control cubical panel

[Star delta] made from 16G CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking with

suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro

controller based control unit and current sensing single

phasing preventer electronic overload protection, over

voltage (Programmable) protection and under voltage (Programmable)

235 protection, prod less dry run protection programming facility for 3.00 7179.00 Ea.

setting of all parameter like overload current, high voltage limit, low

voltage limit, dry run limit with digital indication on seven segment

LED display for any fault like over load, high voltage, low

voltage, dry running single crimped, electronic star delta timer, feather

touch start / stop push buttons to be erected on angle iron frame.

Grouted on wall the contactors will be of L& T, Siemens, BCH make

(A) DOL up to 5.0 H.P.

Supplying & erecting Decorative Cast Iron Lighting Pole with Single

Sr. No ITEM QTY. Rate UNIT AMOUNT

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in

below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm)

high upper ground level with necessary curing and finishing in approved

( for 4 & 6 mtr pole)

238 Supplying & erecting Post Top Light. 20.00 3000.00 Ea

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

239 aluminium finished powder coated pipe with base plate 160x160mm with 10.00 4417.00 Ea

erection by M8x75mm fastner with required RCC foundation.IP65 for

to 20 watt and above ,surge-4kv cat-III

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and locking arrangement consisting

240 of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog 1.00 13218.00 Ea

time switch, auto manual switch of same make and suitable input and

output Bakelite terminals and with door earthing approved by Engineer in

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr

long 'B' grade G.I. pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of 8 SWG erected &

connected as directed (For panel)

For using salt and charcoal / coke as required for pipe type earthing.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required depth

in existing trench for laying of cable. below ground / road surface

for enclosing cable

(A)50 mm outer dia

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the fault

all over the run and back filling the same and making the surface as

Making trench in soft soil of suitable width of 90 cm deep for laying

246 cable or locating the fault all over the run and back filling the same 100.00 55.00 Mtr.

and making the surface as normal ground.

SITC of Analogue Addressable Multi- Sensor which is fully compatible

with Analogue Addressable Protocol,having removable high performance

chamber with Twin fire LED's allow 360 degree viewing, User selectable

sensitivity modes 1% to 4.5% obs/m, Incorporate Optical and dual Heat

elements, lock mechanism (sensor to base), Electronically addressed,

Pulsing/non-pulsing controlled from panel. Approved by LPCB & VdS.

(Including Five year free maintenance with guarantee)

SITC of sensor isolator mounting base, includes stainless steel contacts,

slim profile - only 8mm, quick connection via square cable clamps,

facility for remote indicator, Approved by LPCB (Including Five year

free maintenance with guarantee)

SITC of Analogue Addressable Manual Call Point with Integral Short

Circuit Isolator, Analogue Addressable Protocol having, Bi-coloured

status LED (red for alarm, amber for (short-circuit), Non-frangible

element fitted as standard (conforms to EN54), pulsing/non-pulsing can

selectable via panel, Electronically addressed, Approved by LPCB.

(Including Five year free maintenance with guarantee)

Sr. No ITEM QTY. Rate UNIT AMOUNT

SITC of addressable loop powered Base sounder with integral Beacon,

includes 51 user- selectable tones (all tones EN54-3 compatible),

variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre, Auto

250 shut down feature prevents noise pollution, 'O' rated beacon to EN-23, 6.00 7500.00 Mtr.

IP21 rated for internal use, sounder and beacon can operate

independently, Approved by LPCB (Including Five year free

maintenance with guarantee)

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

SITC of Microprocessor based Net-workable Analogue Addressable Fire

Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-

4 and approved by LPCB. The Fire Alarm Control Panel shall have

inbuilt 3 loops and expandable upto 4 Loops. The Panel must have large

graphic display. The Panel must also have the capability to take

Addressable Intelligent Wired and Wireless Devices on same loop. Each

loop shall have a capacity of 127 analogue Addressable devices and

Base sounders/Base Sounder Beacons. The Panel shall have 240 V AC

power supply along with automatic Battery Charger.

Approved by LPCB (Including Five year free maintenance with

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens

Dome Type Camera, H.265 4MP IR Turret Dome N/W Camera, Manual

Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic

IVA, 4MP resolution (2560 × 1440), True day/night, Digital WDR, 3D

DNR, HLC & BLC, Triple streams, Smart codec by ROI, Built in MIC,

Cyber Security, Basic intelligent video analytics, Audio In, NDAA

Compliance, UL, CE, FCC Certified

Supply, Installation, Testing and Comissioning of Bectro Outdoor Bullet

254 Camera Enclosure Box 6" | Heavy Duty Waterproof CCTV Housing with 8.00 13548.00 Ea.

Side Locking System & Rubber Grip Seal

Full High Definition PTZ Camera with 12X Optical and 12X Digital

Zoom. 1/2.7” HD CMOS sensor. HDMI 2.0 and USB 3.0 synchronous

Video output. 1080p60 resolution on both HDMI & USB3.0 Interface.

RJ-45 Port for Video Monitoring and Streaming Applications. Inbuilt

RTSP/RTMP Server.

4 Infra Red Identities Inbuilt. Wide Viewing Angle of 72.5°.

High frame rate of 60FPS on USB 3.0 port as well as HDMI Port.

TCP/IP Control, RS-232 as well as RS 485 Control.

Supply, Installation, Testing and Comissioning of 64 Channel Network

Video Recorder (NVR), Dual OS design, HDD Hot Swap with RAID

support, N+1 hot spare configuration, Support 16CH@2MP,

H.265/H.264 Video Compression, HDMI, VGA output, up to 8 SATA

interface each with max 10 TB support and 1 eSATA, 16-ch synchronous

playback at up to 1080p resolution, Gigabit Ethernet network interfaces,

bandwidth 320 mbps, CE FCC, BIS, Operating Temp -10 deg to 50 deg

C, USB and serial Interface, RAID

SITC of 55 Inch 500 NTS Brightness professional Display with Direct-

Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor.

Operation 27x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB

Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n Dual

WiFi certificated, BIS, YES CLASS A 3dB margin.

SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP ports

Advanced L2 switching and security features L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user

interface 65W PoE budget

[Approved by Competent Authority i.e. not Below the rank of Executive

Sr. No ITEM QTY. Rate UNIT AMOUNT

SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode”

management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive

SITC of 48 x 10/100/1000BASE-T ports 4 x Gigabit GbE/SFP combo

ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode”

management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive

Supply, Installation, Testing and commissioning of 6 TB Surveillance

Series Hard disk supporting 24X7 operational efficiency

Providing & Erecting Netwrok rack with following capacity with

Necessary cooling fan,Cable manager,6A PDU,equipment rack with

necessary mounting accessories.

Commisioning of Smart Closet 15 U Rack Panel Air Conditioner,

Cooling Capacity 1000W Assembly, 24U Rack, Server/Network, 19-

inch, 800(W) X 1000(D) Power Output Device, 19-inch, Rack Mount,

263 2U, suitable for 6 kVA Kit, Biometric Access Logic, Emergency Door 1.00 16200.00 Ea.

Opening in SC-13-AC RDU Monitoring Kit Vertical Socket strip with

12nos of IEC C13 Sockets & 4nos of IEC C19 Socket with 2.5mtr power

chord with 32A MCB.

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll

Compressor(s), microprocessor based Controller, top discharge type

condensing unit(s), with R410 A Refrigerant (Or Eco Friendly Green Gas

if any), vibration isolators, with suitable foundation, MS Stand for Unit

with necessary paint etc. complete as required. The unit shall deliver the

rated capacity at AHRI Conditions and work even at 50°C ambient

temperature without tripping. The unit shall be suitable to work on 400V

+/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with

first charge of the refrigerant and ready for use as required. The COP at

AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

(Design should be got approval before execution from engineer in charge)

INDOOR UNIT-HIGH WALL TYPE

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable for

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable for

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable for

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable for

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature.

INDOOR UNIT-CASSETTE TYPE

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

269 phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm 2.00 27522.00 Ea.

per TR(minimum) complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

270 phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm 6.00 28723.00 Ea.

per TR(minimum) complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System

Sr. No ITEM QTY. Rate UNIT AMOUNT

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

271 phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm 2.00 29333.00 Ea.

per TR(minimum) complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

272 phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm 5.00 29821.00 Ea.

per TR(minimum) complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System

Supply, installation, testing and commissioning of following minimum

capacity 4-way/2 way/radial flow as per approval VRV Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single

273 phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm 1.00 30460.00 Ea.

per TR(minimum) complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature fresh air provision

compatible for Remote Operation System

COPPER REFRIGERANT PIPING -

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

274 section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable for -

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case

of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature.

(A) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

mm thick insulation

(B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

mm thick insulation

(C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

mm thick insulation

(D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

mm thick insulation

(E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with

mm thick insulation

(F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with

mm thick insulation

Sr. No ITEM QTY. Rate UNIT AMOUNT

(H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with

19 mm thick insulation

Control Cables and Wires

Supply installation testing commissioning Shielded Shielded Control

Cables for VRV System with necessary ISI mark Medium class rigid

PVC pipes with necessary accessories with termination in machine and 250.00 201.00 Mtr.

control equipments..

(C) 4C X 1.5 Sq mm Shielded Armoured

Central Control System

276 (A) Cord type remote control with thermostat, LED Display and internal 16.00 1836.00 Nos

wiring for Cassette, FCU & CSU

277 (B) Central wired Remote Control System 42.00 1654.00 PER HP

(a) General Features & Special Features of the all lift items shall be

taken as below.

(A) GENERAL DESCRIPTION OF LIFTS. -

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting

torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor

of proper rating with high efficiency shall be used.[2] Micro processor

based / PLC, ACVVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response,

UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain

the impact load cabin + passenger with safety factor of fire for steel and

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will

be S.S. finishes with aesthetic appearance with LED ceiling lights. Car

flooring shall be of s/s 304 chaker plate design sugeested of engineer in

charge. of engineer in charge. Car doors shall be of stainless steel grade -

304, hairline finish with centre opening / telescopic automatic doors. Car

panel will also be S.S. 304 finished with emergency stop device,

mechanical door safety device, facility of auto/ attended mode. All car

panel buttons and all floor switches must be with brail language as per

[4] All landing doors must be fire rated for 2 hour shall be fully automatic

centre opening/ telescopic opening made of hairline finish steel grade of

304 with key holes and infrared curtains with Unlocking facility from

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors. -

[7] Full height infra red curtain with multiple cross / crossing light beams

shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall

be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per

actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra

cost, where ever required as / if directed by engineer in charge.

Sr. No ITEM QTY. Rate UNIT AMOUNT

[17] Permanent wiring with necessary safety devices like RCCB in all

circuit, Over Voltage Under Voltage protection and THD eliminator in

circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the

agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft -

and machine room related to erection of lift shall be made by lift agency

without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift inspector

and other authorities. [20] acrylic transparent licence/display A4

size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator

act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing authority

5.agency has to provide third party insurance upto completion of free

maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons

must be of Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of

hairline finish steel grade of 304 should be provided at appropriate height

on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA

rating voltage controlled Stabilizer suitable for your controller, drive and -

all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope

of work which rating is sugested by CEICED Department (electrical

DESCRIPTION OF LIFT : -

Supplying, Erecting, Testing & Commissioning the passenger lift having

following main features:

8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached 1.00 1460178.00 Ea.

herewith. Prem. Cat.

Main Fire Hydrant/Sprinkler Pump- Electric Motor Driven:

SITC of: Back pull out type -Single Stage, Self Mriming, Centrifugal

Pump for Main Fire Pump with Electric Motor, Base frame and

MOC:-Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410.

Flow Capacity: 1680 LPM

Speed: 2900 Approx

Pump shall be capable of furnishing not less than 150% of rated capacity

at a head not less than 65% of rated head The shut off head shall not

exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor + Accessories.

Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in

Location: In Pump Room

Make: Kirloskar / Lubi

Sr. No ITEM QTY. Rate UNIT AMOUNT

Jockey Fire Pump- Electric Motor Driven:

SITC of: Back Pull-out End Suction Type -Single Stage, Self Priming,

Centrifugal Pump for Jockey Fire Pump with Electric Motor, Mechanical

Seal, Base-frame and Couplings.

MOC:-Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410.

Flow Capacity: 180 LPM

Speed: 2900 Approx

Pump shall be capable of furnishing not less than 150% of rated capacity

at a head not less than 65% of rated head The shut off head shall not

exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor + Accessories.

Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in

Location: In Pump Room

Make: Kirloskar / Lubi

Standby Fire Pump- Diesel Engine Driven

SITC of: Diesel Engine driven Standby Pumping System complete

with,diesel engine, Back Pull-out Type Single Stage, Self Priming,

Centrifugal Pump, Couplings & Base-frame:

MOC:- Pump Casing-CI, Impeller- Bronze, Shaft-SS410, Sleeve- SS410.

Flow Capacity: 1680 LPM

Speed: 2900 LPM

Diesel Engine includes 100 ltr diesel tank, battery, battery charger, engine

oil and coolant.

UOM:-Price Per Each Set.

Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in

Location: In Pump Room

Make: Kirloskar / Lubi

Fire Pump Control Panel- Auto and Manual Type.

Supply, Installation and Testing of: Electric Control Panel for Electric

Motor Driven Main Fire Pump and Jockey Fire Pump. all pumps can be

Start Automatically (by Pressure Switch) & Manually.

Design As per the Detail Specifications given.

UOM:-Price Per Set.

Location: In Pump Room

Make: Kirloskar / Lubi

SITC of Pressurized Air Vessel f Size 450 mm Dia x 2000 mm long

fabricated from 10 mm thick MS Plate with 25 mm drain valve, air

release valve with ball valve on top and isolation valve.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall FRLS

284 type with necessary clamps or in existing trench / pipe of following size 40.00 265.00 Rmt

- 3.5 core 35 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

- 3.5 core 35 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

286 connected to switchgear terminals with brass/cadmium plated nut bolts in 32.00 468.00 No.

an approved manner.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall FRLS

287 type with necessary clamps or in existing trench / pipe of following size 20.00 242.00 R.mtr

- 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

- 4 core 16 Sq. mm

Sr. No ITEM QTY. Rate UNIT AMOUNT

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

289 connected to switchgear terminals with brass/cadmium plated nut bolts in 16.00 700.00 No.

an approved manner.

Pressure Gauge with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Gauge with Siphon Tube

MOC:-4” Dial- Glycerin filled- Stainless Steel Body Pressure Gauge with

GI Siphon Tube andBrass Cock.

Size:-Dial: 4” (100 mm)

Range: 0 – 16 Bar (kg/cm2)

UOM:-Price Per Unit

Pressure Switch with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure Switch with Siphon Tube

291 and Cock. 4.00 1265.00 No.

Size:- Range suitable for System Design Pressure.

UOM:-Price Per Unit

Supply, Fabrication, Installation, Hydro Testing & Painting of Under

With necessary Pipe Fitments (Flanges, Bands, Socket etc.),

MS Support/Clamps/Hangers etc.

Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.),

Consumables (Welding Rod, etc.) and Labour Charge.

Quality: GI, C-Class (Heavy).

UOM:-Price Per Running Meter

a Size: 150 mm 50.00 3380.00 R.mtr

b Size: 80 mm 10.00 1890.00 R.mtr

Supply, Fabrication, Installation, Hydro Testing & Painting of Above

With necessary Pipe Fitments (Flanges, Bands, Socket etc.),

MS Support/Clamps/Hangers etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.),

Consumables (Welding Rod, etc.) and Labour Charge.

Quality: GI, C-Class (Heavy).

UOM:-Price Per Running Meter

a Size: 150 mm 160.00 2819.00 R.mtr

b Size: 100 mm 60.00 1907.00 R.mtr

c Size: 80 mm 30.00 1435.00 R.mtr

d Size: 65 mm 40.00 1145.00 R.mtr

e Size: 50 mm 50.00 892.00 R.mtr

f Size: 40 mm 115.00 690.00 R.mtr

g Size: 25 mm 150.00 418.00 R.mtr

Gate /SluiceValve

Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw

& Yoke Type) Valve with necessary pipe fitments, hardware and

MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With

Standard: ISI Marked.

UOM:-Price Per Each No.

Supply, Installation and Testing of:

Check Valve (Ball type or Swing type) with necessary pipe fitments,

295 hardware and consumables. -

MOC:-Body: Cast Iron (With Flange Ends).

Standard: ISI Marked.

UOM:-Price Per Each No.

b Size: 80 mm 1.00 2780.00 No.

c Size: 50 mm 1.00 1770.00 No.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Butterfly Valve

Supply, Installation and Testing of: Butterfly Valve with necessary pipe

296 fitments, hardware and consumables. -

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile.

UOM:-Price Per Each No.

c Size: 80 mm 2.00 2220.00 No.

d Size: 50 mm 3.00 1565.00 No.

Supply, Installation and Testing of: Y Type Strainer with necessary pipe

fitments, hardware and consumables.

MOC:-Body: Cast Iron, Mesh: SS-304.

Working Pressure: 10 Bar

UOM:-Price Per Each No.

Air Release Valve- 25 mm

Supply, Installation and Testing of: Air Release Valve Check Valve with

298 necessary pipe fitments, hardware and consumables. 2.00 1175.00 No.

MOC:-Body: Gunmetal / SS.

UOM:-Price Per Each No.

Fire Hydrant Landing Valve (Stainless Steel (SS-304), ISI Marked):

Supply, Installation and Testing of: Fire Hydrant Landing Valve with

necessary pipe fitments, hardware and consumables.

MOC:-Body: Stainless Steel (SS-304), Working Parts: Stainless Steel

(SS-304), Coupling: Stainless Steel (SS-304),

Standard: -ISI Marked.

Size:-63 mm (Flange End: NB 75 mm, PCD 160 mm)

UOM:-Price Per Each No.

Fire Hose Pipe (Delivery Hose)- 63 mm x 15 m

Supply, Installation and Testing of: Fire Hose with Hose Couplings.

RRL (ISI Mark- Type A) Fire Hose.

Hose Couplings: ISI Marked Stainless Steel.

With SS Wire Binding.

Standard: - ISI Marked & TAC Approved Hose.

Size:-63 mm dia x 15m long Hose.

UOM:-Price Per Each Set.

Cabinet For Fire Hose (Hose Box)- Double Type

Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box)

suitable to accommodate 02 no. of 15 m long fire hoses and 01 no. of

nozzle. With Lock-n-key facility. Wall Mounting Design.

MOC: 16 Gauge MS Box with Powder Coating

Standard: - As per Guidelines.

Size:- Suitable for 02 nos. of 15 m long hoses.

UOM:-Price Per Each No.

Fire Hose Nozzle- Short Branch Pipe Nozzle.

Supply, Installation and Testing of: Short Branch-pipe Nozzle.

MOC: Stainless Steel (SS-304).

Standard: ISI Marked, Heavy Quality.

Size:- 63 mm X 20 mm

UOM:-Price Per Each No.

Fire Hose Reel Set (ISI)-19 mm x 30 m -Rubber Hose.

Supply, Installation and Testing of: Fire Hose Reel Set with necessary

pipe fitments, hardware and consumables.

MOC:-Drum: 16 G Powder Coated MS,

Hose: 19 mm X 30 m heavy-duty RUBER hose.

Shut-off Nozzle: SS-304.

With Control Valve: SS- 25mm Ball Valve.

Standard: ISI Marked. Heavy Quality.

Size:-19 mm dia x 30m long Hose.

UOM:-Price Per Each No.

Fire Service In-let (In-let Connection for Fire Brigade)-4 Way Type.

Supply, Installation and Testing of: Fire Service Inlet with necessary

hardware and consumables.

MOC:-Body: Heavy-duty CI.

Couplings/NRV: Gunmetal.

Standard: -Made As per IS Standard- Heavy duty quality.

Size:-Couplings: 63 mm, 150 mm E-table Flange End.

UOM:-Price Per Each No.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Sprinkler Head/ Nozzle.

Supply, Installation and Testing of: K 5.6 Pendent type Standard

Response Sprinkler rating of 57 deg.C. with required accessories.

305 MOC:-Brass 97.00 126.00 No.

Standard: UL Listed

Size:-15 mm (1/2”)

UOM:-Price Per Each No.

Supply, Installation and Testing of: Flow Switch with necessary pipe

306 fitments, hardware and consumables. 3.00 4315.00 No.

UOM:-Price Per Each No.

With all wiring/ cabling up to control panel and all electrification.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall FRLS type

307 with necessary clamps or in existing trench / pipe at road crossing or 500.00 185.00 Rmt

floor of following size of cable.

(a) 3 core 2.5Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

(a) 2 to 4 core 2.5 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

309 connected to switchgear terminals with brass/cadmium plated nut bolts in 56.00 667.00 No.

an approved manner.

Providing and fixing, testing and commissioning of Drainning Valve

50mm dia with by pass drain connection as required.

Providing and fixing, testing and commissioning of CO2 type Fire

Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS

311 with controll discharge mechanism fitted with Hose, Horn & TROLLEY 3.00 26165.00 No.

confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS

Fire Extinguisher- ABC Powder type, 6 kg.

Supply, Installation and Testing of: ABC Powder Fire Extinguisher

necessary hardware and consumables.

Stored Pressure Mechanism.

Charged with MAP-50 % (ABC) Dry Powder.

With wall mounting clamp.

Size:-6 kg Powder.

UOM:-Price Per Each No.

Fire Extinguisher- CO2 Gas type, 4.5 kg.

Supply, Installation and Testing of: CO2 Gas Fire Extinguisher with

necessary hardware and consumables.

Standard: - Confirming to IS: 15683-2006 with ISI Mark.

UOM:-Price Per Each No.

Supplying FIRE bucket round bottom of 9 litres capacity made out of

gauge G.I. sheet with extra handle at bottom duly painted white inside

and Red out side with FIRE mark, filled with dry-sand and kept on

existing stand provided or hung on wall hook.

Supplying and erecting floor mounting stand for keeping four nos. of

FIRE buckets comprising 1500 mm in length, 900 mm height frame

315 made out of 30mm X30 mm X 4 mm angle iron with cross supports for 1.00 4600.00 No.

legs, welded with 4 hooks and duly painted with one coat of red lead and

two coats of approved enamelled silver paint.

Safety Signage- Night Glow Type:

SIRC of: Single Side Printed Night Glow (Glow in Dark ) Safety

316 Signage. Printed on PVC sticker sheet and pasted on 3-5 mm thick PVC 50.00 575.00 No.

Size: 10” X 10”.

317 Providing and Laying NP3 RCC Hume Pipe of 300 mm at road crossing 95.00 850.00 R.mtr

( * Rate are exclusive of GST.)

I / we agree to carry out the above work at __________% above the estimated rate put to tender

I / we agree to carry out the above work at __________% below the estimated rate put to tender.

Sr. No ITEM QTY. Rate UNIT AMOUNT

Estimated amount Estimated amount

put to tender Rs. 54414949.84 put to tender Rs.

Net amount Rs.___________________ Net amount Rs.______________________

Signature of Contractor with Seal Chief Officer

NAA GIDC Ankleswhar