PROVISION OF PARKING SHED AT NAQAS PROVN OF FENCING PATHWAY AND EOD CRAFT SHED AT EOD TRAINING AREA AT DIVING SCHOOL AND ADDN ALTN TO SHOULDERS OF APPROACH ROAD AND PROVISION OF DRAIN AT NOI UNDER GE NW KOCHI

Amount

Surface excavation in n.exc. (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate complete all as specified and directed

M&L for coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Excavating in post holes each n.exc 0.5 cum, getting out in soft/loose soil (or similar holes), well ramming , filling in and ramming with earth or broken rubble mixed with earth around in layers not exc 25 cm

Removal of excavated material to a distance exc.1.50 Km but n exc. 5 Km and depositing where directed.

M&L for Plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.

M&L for rolled sections (Tubular sections) as in main pillars and cross beams , hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality-B complete all as specified and directed

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

M&L for preparation of new steel surfaces and applying two coats of Anti corrosive paint over a coat of red oxide primer all as specified and directed.

M&L for precast cement concrete block masonry 1:3:6 type C1 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation for load bearing wall / wall complete all as specified and directed.

M&L for 8 mm thick CM 1:4 mixed with approved water proofing compound over backing coat of 12 mm thick in CM 1:6 mm plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement. Make: WPC shall be measured and paid separately.

M&L 10mm thick rendering in cement mortar (1:6) on fair faces of concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only Integral waterproofing compound

M&L for PCC 1:3:6 type C1 with using 20 mm graded stone aggregate as in coping on walls finished even and fair including necessary form work all as directed by Engineer in charge.

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek or equivalent) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note for item 15&16:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. n.exc 10 sqm on plan and getting out in soft / loose soil.

Removing excavated soil exc.250m but n.exc 500m and depositing where directed by Engr-in -charge.

Returning filling in soft/loose soil including spreading levelling watering and wall ramming in layers n/exc 25 cm thick all as spd and directed

M&L plain cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.

M&L RCC (Nominal mix ) type B1 1:2:4 (20mm graded stone aggregate ) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L Form work to footings/PB, fair finished surface of concrete complete all as specified and directed..

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

All as per item No.27 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc.

M&L for cement concrete type C1 1:2:4 using 20 mm graded aggregate as in coping and use waste of formwork etc complete all as specified and directed

M&L 10mm thick rendering in cement mortar (1:4) on fair faces of concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc. conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut nexc 10cm long .

S&F MS galvanised chain link fencing of grid size 50x50 with 3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) including straining bolts, etc. and provision of binding wire complete all as specified and directed

M&L Surface dressing nexc 15 cm deep soft/loose soil complete all as specified

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed

Fixing only Machine pressed precast concrete interlocking paver block (Tiles obtained from item No. 37 shall be re-used) complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium alkali & fungal resistance, dirt resistance exterior floor coat emulsion paint of required shade over and including priming coat of exterior primer complete all as specified. Make : Indigo/Asian paint/Berger

M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete all as specified and directed

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete.

M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including necessary formwork complete all as specified.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer with alkali resistant priming paint on wall all as specified.

M&L for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

K.V.GEORGE AND COMPANY

T K BUILDERS

SOORYA ASSOCIATES

MS BUILDERS

REIGN CONSTRUCTIONS