WBPWD/EE/PED/NIQ09 /2025-2026

Amount

SUB HEAD-I (DISTRIBUTION WIRING & Plug Points) Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5] Average run 8 mtr [E-15/5(c)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board [E-15/4(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required [E-14/1(a)]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(i)]

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(ii)]

2x(6 sqmm)+1 x (4 sqmm) [ E- 14/1(iv) ] For TPNDB to SPNDB

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

1.5 sq mm [ NS]

2.5sqmm [F-5/9(i)]

6 sq mm [ F-5/9(iii) ]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6/21]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/26]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14/29]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]

SUB HEAD-2 (DISTRIBUTION BOARD/MCB/MCCB/ISOLATOR ) Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

4 Way [Make- Legrand] [D-11/15]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

4 Way [Make- Legrand] [D-10/14]

S & F double-door 2+8 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+8 way Enclosure (607712) Legrand or Eqvt make of L&T/Seimens/Hager -[D-9/13]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand) 2+4 way Enclosure (607710) [D-9/13]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

100 A FP [D-8/10] [Make-Legrand ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ] or Eqvt make of L&T/Seimens/Hager

40 A DP [ D- 5/6 ] [Make- Legrand]

63 A FP [D-5/6] [Make- Legrand]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand or Eqvt make of L&T/Seimens/Hager]

6-32A SP [ D-6 /7] [Make- Legrand]

32 A TP [D-6/7] [Make- Legrand]

63 A TP [D-6/7] [Make- Legrand]

SUB HEAD-3 (FITTINGS & FIXTURES ) Supply of 4' 22W T8 LED tube light with complete set (Make:- Philips TMC 502 1xT-LED 22W, Master LED tube 1200mm 18W 865T8I-2100lm ) [NS]

Supply of 4' 22W T8 LED tube light with complete set (Make:- Philips TMC 502 2xT-LED 22W , Master LED tube 1200mm 18W 865T8I-2100lm ) [NS]

Supply of LED bulb 9 watt (Make- Philips/ Cropmpton/ Havells)

Supply of AC ceiling fan of following sizes complete with blades, canopy , fork down rod etc. with safety wire ( Make - New Breeze /Crompton Make- High speed)

1200mm(48'') sweep (Crompton -Rivirea)

Supply & fixing 450mm sweep wall bracket fan(high speed) with metal body & blades(Orient - Wall-II Tornado,or equivalent cat of CG/EPC/Cinni) with necessary wooden board on wall with nuts, bolts, washer etc.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [ C-2/17 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS [C-2/16 ]

Supply & Fixing Angular Batten holder including fixing of lamp [C-2/11]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sqmm flexible copper wire[C-3/21(a)]

Supply of 230V AC heavy duty Exhaust fan (EPC Make) of following size with all accessories. (NS)

230mm(9") sweep 1370 rpm

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated sheathed copper wire and making connection incl. S & F Al. louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (NS)

230mm(9") sweep 1370 rpm [C-4/28(a) & D-14/32(a)]

SUB HEAD-4 (POLYTHENE PIPE & LAYING ) Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works [E-4/11]- 150 mm x 100 mm x 65 mm [E-4/11(b)]

175 mm x 100 mm x 65 mm [E-4/11(c)]

SUB HEAD-5 ( SUPPLY & LAYING OF CABLES) Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco/ Gloster/KEI/Polycab/ Havells]

2 Core 10 Sq. mm . [ NS ] For compound light

3.5 Core 25 Sq. mm [ NS ] For VTPN DB to TPNDB

3.5 Core 50 Sq. mm [ NS ] For Meter to VTPNDB

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(a)]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(b)]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [F-1/2(c)]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [F-2/1(a)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [F-4/7]

2 core 10 sqmm [F-4/7(a)]

4 core 25 sqmm [F-4/7(c)]

4 core 50 sqmm [F-4/7(c)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : [F-5/8(b)]

2 core 10 sqmm cable [F-5/8(b)(iii)]

3½ core 25 sqmm cable [F-5/8(b)(xvi)]

3½ core 50 sqmm cable [F-5/8(b)(xvi)]

SUB HEAD-6 ( OUTDOOR LIGHT, POLE , LOOP BOX ) Supply of 45 W LED Street light luminaries (Crompton make CRP-417-45-57-SL-LM-NSG) with all accessories. Or Eqvt make of Philips , Bajaj , Havells as per direction of EIC.[NS}

Supply of 240V, 100 W LED Flood luminarie complete with all accessories and equipped with IP66 Protection (Crompton Geaves, Cat no.- CFS-504-100-57-60D-SL-GL-NSG or equivalent make of Havells/Philips/Bajaj//wipro/other equivalent make as approved by E.I.C) on existing MS Pipe/Mini Pole as per direction of E.I.C. [NS]

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.200 x 150 x 100mm.[I-2/16]

S&F of 40 mm. dia. 0.75 Mts. long G.I. pipe (medium) arm bracket grouted by 4 nos. 5” long GI nut bolt & 2 nos. “U” clamp arrangement on wall with S&F 1 no. 40 mm X 20 mm reducer.as per direction of EIC. [NS]

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 32 A DP (Make-Havells , L&T , Seimens as per direction of EIC.[D-1/1(a)]

Supplying and fixing 415V TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [ Make- L&T/Siemens/Havells as approved by EIC]. 125 A, [ Make- L&T/Siemens/Havells as approved by EIC ( Make- L&T ) [D-3/4(a)] FOR PUMP

S&F outdoor light timer for febricated with double door 8 Way SPNDB as per L&T Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1no ii) 22A TP power contactor with 220 coil voltage (L&T, Cat no-MNX22-2P, CS90238)-1 No. iii) Digital timer switch (L&T, cat no-Crono 67DDTO)-1no [N/S]-

SUB HEAD-7 ( EARTHING & EXCAVATION) Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe.[G-1/2(a)]

Excavation of soil for installation of Earth Electrode and filling & ramming.For morrum Soil .[G-1/1(b)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [G-2/3(b)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required[G-2/4(b)]

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), with plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Dismentaling charges

SANJIB GHOSH (BID ID -6876194)

SAMPA ELECTRICALS (BID ID -6842216)