SPL REPAIR TO BLDG NO P 46 UNIT MAG PROVN OF COVERED SHED NEAR BLDG NO T 174 UTENCILS OF KITCHEN OF JCOSOR MD ACCN AT MTTC AREA AND PROVN OF CERTAIN REVENUE AND MINOR WORK UNDER GE E BAREILLY

Amount

Surface dressing n.exc (not exceeding) 15 cm deep in hard / dense soil complete all as specified and as directed .

Rough excavation n.exc (not exceeding) 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed .

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n exc. 50 mtr and making good surface complete all as specified and as directed.

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed .

Demolition of Brick work built in CM of any description complete all as specified and as directed.

Dismantling of old US soil,waste pipes of any size, fitting and description from wall all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for taking down existing roof treatement and wire brushing and cleaning top surfaces of tile or cement concrete over roof slab including flashings and junctions of parapets etc sweeping, cleaning and washing down with water etc complete all as specified and as directed .

Taking down cement plaster of any description in any postion incl hacking out and scrubing down with water etc complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed .

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25 cm complete all as specified and directed

M&L for PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate), as in foundation ,filling and mass concrete complete all as specified and directed

M&L for PCC 1:2:4, type B-2, (using 40mm graded crushed stone aggregate), as in foundation ,filling and mass concrete complete all as specified and directed

M & L for 100 mm thick cement concrete (1:4:8) Type D2, (using 40mm graded crushed stone aggregate) as in subbase complete all as specified and directed

M&L for 100mm thick cement concrete (1:2:4) type B2 ( using 40 mm graded crushed stone aggregate ) as in floor complete all as specifid and directed

M&L 25 mm thick, PCC 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in floor &rough finish the sub base complete all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in copings,benching, including slightly rounded or chamfered angles complete all as specified and directed

M & L for brickwork with flyash Bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in mCM (1:4) complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:4) on brick masonry surfaces or on other than fair faces of brick masonry & finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in CM (1:3) on surfaces of fair face of brick work or concrete surface of chjjas and ceiling projection,soffits with using WPC @ 2% by weight of cement & finished the surface even and smooth with out using extra cement complete all as specified and directed .(NOTE:- WPC will be measured and paid separately as "SUPPLY ONLY" ).

M & L Rendering 15mm thick in CM (1:3) on roof surface with WPC & finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for hardcore of broken brick bats gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface complete all as specified and directed

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar (1:6) for laying floor finishes/tiles complete all as specified and directed.

M&L for 20 mm thick Screed bed or bedding layer in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engineer - in - Charge.

M&L Glazed ceramic tiles (coloured) of size exc 0.11 sqm but n . exc 0.18 sqm on vertical surfaces of walls such as skirting, dado etc and jointed in neat cement slurry and pointed in white cement over all as specified and directed .

M&L for non skid coloured 7 to 8 mm thick ( squrare/ rectangular) polished , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-22 mm thick, and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface complete all as specified and directed

M&L 20-22 mm thick Granite of black colour (table rubbed and polished) as in windows cill , in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed

M&L Granite (of any type) tiles 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone included grinding and polishing completed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed .

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with gray cement and no pigment complete all as specified and directed.

M&L for Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade approve design, shape , size and colour of top layer complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for machine pressed precast cement concrete kerb stone including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone complete all as specified and directed .

M&L for factory made Rubber moulded Chequered cement concrete tiles of size 250 mm x 250 mm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors/Path complete all as specified and directed .

M & L for 75mm thick PCC (1:3:6) , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in CM (1:3) complete all as specified and directed .

M& L for PCC (1:1.5:3) Type B0 ( using 10-12.5 mm graded crushed stone aggregate) as in coping,padding, kerbs/stops,tank foundation etc rounded or chamfered on edges complete all as specified and directed.

M& L for forming constraction (dummy) joints 65mm deep x 10 mm wide , filled with sealing compound grade B complete all as specifid and directed

Supply & Fixing Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as secified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent ot shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less tham 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto all as per above item 46 but 6 to 8 mm dia complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) for slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in Plinth, lintel / roof beam complete all as specified and directed.

M&L Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exe 200mm thick (horizontal or sloping) for rough finished surface of concrete complete all as specifid and directed

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished surfaces complete all as specified and directed.

M&L for Form work to sides and soffits of floor or roof beam, beam haunchings and lintels etc complete all as specified and directed.

M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations plinth beams and similar work verticle or to batter rough finished surfaces of concrete.

M& L Concrete bed to drain pipe in Cement concrete (1:3:6) type C-2 ( using 40 mm graded crushed stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F Reinforced concrete pipes, 150 mm bore class NP2, as in vent Pipe and jointed using cement with collars complete all as specified and directed.

S&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specifid and directed.

S&F Plate girder or single stanchions,built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe 410 -W (GdeE- 250) quality A complete all as specifid and directed

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifid and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifid and directed.

M & L for Broken Brick aggergate loose filling for soak well complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen with plugs washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx100mm including waste pipe etc complete all as specifid and directed.

S&F 500 litres capacity rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed

S&F 1000 litres capacity rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed

S&F Ball brass valves 200mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F Low density polythene pipe connection 450 mm long suitable for connecting 15mm bore GI pipe including chromium plated brass coupling nuts on both ends complete all as specified and directed

S&F Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions for 15mm bore etc complete all as specified and directed.

M&L for Providing, cement concrete (1:2:4) Type B1 ( using 20mm graded crushed stone aggregate) , as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates complete all as specified and directed.

M & L for cutting chases, pining in , making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed and making good, cutting exc 10 cm but n exc 20 cm girth complete all as specified and directed.

M & L Forming jambs, etc, to opening, including Cutting toothing and properly bonding into , old work , also facing, jointing and pointing to match existing work complete all as specified and directed..

Supply only water proofing compound

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde-E- 250) quality A complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed

M&L for Angle iron, iron flats, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F 5 to 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed

S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. (MAKE : Aluminium section shall be JINDAL/INDALCO as approved by GE)

S&F for steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Sheet Glass/Wire cloth shall be measured and paid separately as Supply only ).

S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Sheet Glass/Wire cloth shall be measured and paid separately as Supply only ).

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Grills,Sheet Glass/Wire cloth shall be measured and paid separately as Supply only ).

S&F Steel windows/ventilator with pressed steel frame (dimension- 95X45X1.25 mm ),side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutterg with glazing bars( out side shutters) and wire gauged openable shutter without glazzing bars ( inside shutters ),dovetailed or welded complete all as specified and directed all as per Drg NO- TD/088 dt 07 Jan 2002. (Note :- Grills,Sheet Glass,/Wire cloth shall be measured and paid separately as Supply only).

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all specified and as directed.

M&L 3mm thick glass, glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all specified and as directed.

M&L stainless steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.(MAKE : Aluminium section shall be JINDAL/INDALCO as approved by GE)

S&F solid panel PVC door frame 50mmx 47mm made out of 5mm plain covered PVC sheet , reinforced with M S square tube and fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifica-tion & drawing complete all as specified and directed.

M&L for 2nd class hard wood plain, solid straight chowkat and frames wrought ,frame rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

S&F for 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

S&F 100mm size Butt hinges, mediam weight, cold rolled mild steel, and fixed complete all specified and as directed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 200mm size complete all specified and as directed.

S&F 150mm long extruded Aluminium anodised,barrel tower bolts of extruded section and fixed complete all specified and as directed.

S&F mild steel pressed handle over a type stove enamelled black 150mm size complete all specified and as directed.

S&F for Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin size 100mm long and fixed type B-21 complete all as specified and directed.

S&F for 150 mm long extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

S&F for 250 mm long Aluminium alloy sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L for 20 mm bore (medium grade) galvanised tubes with all fitting as laid in floor, fixed to wall or ceiling complete all as specified and directed.

M&L for 15 mm bore (medium grade) galvanised tubes with all fitting as laid in floor, fixed to wall or ceiling complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius,complete all specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius,complete all as specified.

M&L for MS work as in clamps,holdfast,wall tiles,hooks,anglecleat and similar small articles corforming to Fe 290 Gde E-165 complete all as specified.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as spd as directed

S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified as directed.

S&F Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as spd and directed

S&F fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.

S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1( using 20 mm graded crushed stone aggregate) complete all as specified and directed.

S&F Vitreous China Urinal Flat back large size 590X390X 375 mm including Waste pipe complete all as specified and direted . ( Cat NO 60002 of Hindware or equivlent as approved by GE)

S&F Vitreous China bowl Urinal automatic of size 465x355x265mm, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe fixed in repairs complete all as specified and direted .

S & F for 0.8 mm thick stainless steel in graceful glory range ,anti scratch, satin finish of popular range kitchen sink over all size 990x459mm , double bowl size 400x340xx200 mm inclu waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .(Model : Parryware Cat No C 857081, Cera Cat No B 4513201,Kaff Cat No KS610 SB (R10) as approved by GE.)

S&F in Vitreous China counter top oval type coloured wash basin suitable size including pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified. .

S&F Vitreous China wash basin white flat back of size 550x400mm excluding tap, water chain and plug and porcelene stopper but including bracket, CP waste coupling , PVC waste pipe etc complete all as specified.

S&F for Vitreous China squatting pan 'Orissa' pattern, of size 580x440mm, white, with and including vitreous china 'P' and 'S' trap and integral foot rests including making good to disturbed floor with PCC complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs cap white / coloured incl internal fittings brackets clamp and 32mm dia PVC flush pipe complete all as specified and directed incl taking down low level cistern complete

S&F for pillar tap 15mm dia cast copper alloy with capstan heads, chromium plated, screwed doen high pressure with or without lettered 'Hot" or 'cold' with long srewed shanks and fly nuts, screwed for iron pipe to fixed complete all as specified and directed.

S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. (Model No: ARI -39053 of Jaquar,Hindware Model No F320006, Parryware Model No G4907A1 as approved by GE)

M&L Brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe or union etc complete all as specified and directed.

M&L for preparation of wall surfaces with 1mm thick wall care putty and applying two coats of cement base paint over a priming coat paint complete all as specified and directed.

M&L for applying three coat of white wash on roof ceiling plastered surface including preparation complete all as specified and as directed.

M&L for applying three coat of white wash on new plastered wall surface including preparation complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed.

M&L for complete removal of existing treatment including preparation of wall surfaces with 1.5 mm thick wall putty and applying two coat of oil bound distemper over a priming coat paint complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of wall surfaces with 1.5 mm thick wall care putty and applying two coats of cement base paint over a priming coat paint complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zine chrome primer complete all as specified and as directed.

Material & labour for applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface exc 10cm width or girth including preparation of surfaces complete all as specified and directed .

M&L for Point wiring with standard copper conductor FLRS unsheathed 1100 V cables PVC 1.5sqmm single core in and including PVC Casing& Caping not less than 20 mm complete cutting and chasing using for terminal box of adequate size with 3mm thick laminated sheet cover etc for one light /fan /Exhaust fan /bell point controlled by one, one way switch including 1.5sqmm cable as earth wire connected to earth dolly complete all as sepecified and directed.

All as per item No130 here in before but for One 3 ;pin socket oultel 5 Amp on the same board with other switch.

All as per item No130 here in before but for One 3 pin socket outlet 5 Amp independent

M&L for Point wiring with standard copper conductor FLRS unsheathed 1100 V cables PVC 1.5sqmm single core in and including PVC Conduit conceald not less than 20 mm dia complete cutting and chasing using for terminal box of adequate size with 3mm thick laminated sheet cover etc for one light /fan /Exhaust fan /bell point controlled by one, one way switch including 1.5sqmm cable as earth wire connected to earth dolly complete all as sepecified and directed.

All as per item No133 here in before but for One 3 ;pin socket oultel 5 Amp on the same board with other switch.

All as per item No.133 here in before but for One 3 pin socket outlet 5 Amp independent

All as per item No.133here in before but for one 5 pin socket outlet 15 Amps independent using 4.0 Sqmm PVC insulated & unsheathed copper conductor cable(multistranded) and 2.5Sqmm cable for earth wire .

S&F switch piano type, flush type single pole one way 5 Amp, 230Volt complete all as specified and directed.

S&F switch piano, flush type single pole one way 15 Amp, 230Volt complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type (Multi purposes ) , 230Volt complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp, flush type (Multipurposes), 230Volt complete all as specified and directed.

S&F Ceiling rose 3 terminals, PVC / polycarbonate, isolated body complete all as specified and directed.

S&F Lamp LED 9V 230 Volt

S&F Lamp holder, PVC/Polycarbonate type with back plate for batten fittings complete all as specified and directed.

S&F Lamp LED Retrofit lamp B-22 holder base with poly carbonate diffuser 9 Watt, 230 Volt complete all as specified and directed.

S&F Ultra slim LED MS Batten light fitting 1X20Watt , powder coated decorative end cap complete with retrofit poly carbonate glass tube LED 20W, 4' long including suitable electric connection with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified and directed.

S&F LED Bulk head light fitting 10 Watt with Engineering plastic housing & clear prismatic diffuser, heat sink integrated including smd LED 10Watt complete all as specified and directed.

S& F Ceiling fan 1200mm sweep, single phase, 230 Volt complete with all assecissories Make - Crompton/Havells.

S& F electronic fan regulator stepped type 180 watt , 230 Volt complete

Supply & Fix of exhaust fan 250mm sweep , PVC body, 3-4 blades, AC, 230 Volts complete with louvers etc including suitable electric connection with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified.

Supply & Fix of exhaust fan 300mm sweep , Iron body, 3-4 blades, AC, 230 Volts complete with louvers etc including suitable electric connection with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling roze to batten complete all as specified.

S & Installation Water heater storage type (Geyser), electric of any capacity with complete accessories 230V received from Item Sl No 5 including Hot & cold water supply connection and fixing with nuts, bolts & washers and electric connection also complete all as sepecified and directed. .

S & F Desert Cooler electric driven single phase having nominal air flow capacity of 4000 Cum per hour, steel body complete all accessories.and all as sepecified and directed.

S & F Water Cooler electric driven single phase having storage capacity of 80 Ltrs and normal cooling 40 Ltrs per hours , steel body complete all accessories.complete all as sepecified and directed.

Supply and install split AC 1.5 Ton , 5 star, inverter technology electric driven single phase with out door and in door unit complete all acessories specified and directed.

Supply and install Refrigerator , 3 star, inverter linear, frost free electric driven single phase complete all acessories of capacity 320 ltr of make LG all as specified and directed.

S & F Voltage steblizer for automatic operation, single phase naturally air cooled , digital type and designed for inputvariation between 170 Volt to 250 Volt with out put voltage steblized at 230 Volt with accuracy of +_2.5 % and of capacity 2.0 KVA complete all as sepecified and directed.

S & F Voltage steblizer for automatic operation, single phase naturally air cooled , digital type and designed for inputvariation between 170 Volt to 250 Volt with out put voltage steblized at 230 Volt with accuracy of +_2.5 % and of capacity 3.0 KVA

S & F Voltage steblizer for automatic operation, single phase naturally air cooled , digital type and designed for inputvariation between 170 Volt to 250 Volt with out put voltage steblized at 230 Volt with accuracy of +_2.5 % and of capacity 5.0 KVAcomplete all as sepecified and directed.

M & L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in PVC conduit all as directed.Note : 2 run of wire + 1 run of earth wire + 1 run of PVC conduit will be measured as one unit complete all as sepecified and directed.

M & L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in PVC conduit all as directed.Note : 2 run of wire + 1 run of earth wire + 1 run of PVC conduit will be measured as one unit complete all as sepecified and directed.

S&F sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts, double door Single pole & neutral with 200 Amps rated bus bar.(MCBs are to be measured and paid for seperately)

S&F sheet metal enclousers (DBS) when MCBs to be used 8way double door single pole & neutral with 200 Amps rated bus bar.

S&F MCB single pole & neutrall of size 16A to 63 Amp, 230V, 10KA, B curve type.

S&F MCB single pole of size 6A to 32 Amp 230 Volt, B curve type.

S & F pressed steel terminal box 200mmx150mmx60mm complete.

S & febricate and install Angle Iron stand for desert cooler made out of 35mmx5mm steel including painting etc complete.

S&F single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one single pole 20 A 240 V MCB 10 KA complete all as specified and directed

S & F stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle both ends for iron pipe or for union of size 15mm bore dia complete all as specified and directed.

S & F Bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule of size 15mm bore dia complete all as specified and directed.

Supply & laying sub class B bricks, well burnt , laid wirdth wise along the length of cable laid in trench over sand cushion laid for cable protection, complete as specified and directed.

Material and labour for river washed and sreened, dry sand for filling in trench below and around the under ground cable for cushioning of cable etc, complete all as specified.

Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 40mm/25mm bore GI pipe for crossing the cable and making good both the ends all as specified and directed at site. Note :- GI pipe shall be measured and paid separately under respective item.

Supply & fix tube 25mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor.complete all as sepecified and directed.

Supply & fixing ultra slim LED batten T5 20Watt complete with 4' long LED etc complete all as sepecified and directed.

Supply, Laying and testing cable XLPE insulated, screened, PVC bedded,GI steel strip or wire armoured, electric power cable ( heavy duty ), 1100Volts with stranded aluminium conductor of size 6 sq mm 2 core.complete all as sepecified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as specified or indicated including testng on completion.Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract

UTTRAKHAND BUILDERS

M/S Gupta Builders