Deo Irrigation Project

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified by

the Engineer and valued at the rates and prices tendered in the priced Bill of Quantities,

where applicable, and otherwise at such rates and prices as the Engineer may fix within

the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as

it is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to enter

a rate or price shall be deemed to be covered by other rates and prices entered in the Bill

of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant sections

of the contract documentation shall be made before entering rates or prices against

each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping with a

tractor of at least 150 kw with a single rear mounted heavy dutyripper.

BILL OF QUANTITIES

Name of Work: Providing and erecting High mast with LED light with cable, led street light, starter

repairing and panel board at Deo dam.

Item Quantities Item of Work Estimated Unit Total amount

Item Quantities Item of Work Estimated Unit Total amount

s estimated Rates(In according to

No. figures) estimated

1 2 Supplying, erecting, testing, commissioning 209072.02 No.

approved make M.S. Polygonal High Mast

Pole having following general

Specification.(a) Polygonal Section fabricated

from M.S. Plate confirms BSEN 10025 & Hot

deep galvanized minimum 65/86 micron (as

per IS 2629 /1985) Lantern carriage with ring

and rubber lines for erection of luminaries of

suitable site.(b) Maximum telescopic section

not more than four(c) Double drum gear pipe

motorized winch with 6mm dia S.S. Rod (For

16 mtr and above size)(d) Approved make

L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of

sq.mm 5 core ISI copper cable

Unarmoured.(e) Bottom most section suitable

for mounting reversible motor and

switchgears having door not more than

1400mm x 300mm with waterproof gasket &

hinges & locking arrangement.(f) Pole

structure comprises suitable size of reversible

motor, cable and necessary switchgears with

control panel. (g) bottom section shall have

suitable size of thickness supports ribs

foundation bolts nuts etc.(h) Item not

comprises the cost of lanterns.(i) Necessary

Cement Concrete foundation as per IS

including testing & commissioning of the

entire structure for following size of High Mast

poles [A] High Mast 20 Mtr. TOP A/F

Mm, BOTTOM A/F 450 Mm, No. of Sec. No. -

2, Bottom Thickness - 4 mm, Top Sec. -

mm, Size Base Plate - dia.580 mm x 20 mm

thick, Foundation Bolt Size M13 x 1000mm,

Qty - 10 Nos., Suitable for mounting Fitting of

Light - 12 Nos. [Approved Make - Utkarsh,

Bajaj, RR ISPAT, FAB, Crompton, Transrail]

1a 2 [B] High Mast 25 Mtr. TOP A/F 170 Mm, 269466.99 No.

BOTTOM A/F 450 Mm, No. of Sec. No. -

Bottom Thickness - 4 mm, Middle Base

Sec.mm - 3, Top Sec. - 3 mm, Size Base

Plate -dia. 680 mm x 35 mm thick,

Foundation Bolt Size M30 x 1000 mm, Qty -

12 Nos., Suitable for mounting Fitting of Light

- 12 Nos.[Approved Make - Utkarsh, Bajaj,

RR ISPAT, FAB, Crompton, Transrail]

2 5 Supplying Feeder pillar outdoor stand 35713.43 No.

mounted made from 1.6 mm thick Stainless

steel AISI 304 Confirm to IS 1570 part-V

Sheet, Size 500 mm x 500 mm x 300 mm

deep with leg made from 35x35x3 mm angle

complete fabricated. The Feeder pillar with

A TPN MCB incomer ( C&S, L&T, Siemens),

single dial time switch, 45A TP contactor

(C&S, L&T, Siemens) for the automatic

switching of luminaries, power tool control

with 2 no 9 A contactors and raise lower push

button, Incoming 35 sq.mm and outgoing

& 2.5 sq.mm terminal complete with internal

wiring 4 sq.mm copper wire & suitable lugs.

All necessary AccesS.O.R.ies including the

item. The box shall be provided with front

door hinged at one end. And locking at other

end, rubber packing should be provided on

closing door. And having cover inside for

M.C.B.& Danger notice board on door.

3 300 Providing and erecting XLPE (IS:7098)(I)-88 140.39 Mtr.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

(A) 4 core 10 Sq. mm [Approved Make -

Avocab, Havells, Finolex, RRKabel, L&T,

4 200 Supplying and erecting Flexible PVC 220.18 Mtr.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

(A) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

core) [Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

core) [Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

core) [Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

5 250 Providing and erecting XLPE (IS:7098)(I)-88 190.89 Mtr.

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables.

(A) 4 core 25 Sq. mm [Approved Make -

Avocab, Havells, Finolex, RRKabel, L&T,

6 10 Supplying and erecting LED street light / 3345.12 No.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage

protection. (a) 48 watts [Approved Make -

Philips, Wipro, Crompton, Havells, Surya,

6a 130 (b) 60 watts [Approved Make - Philips, Wipro, 4997.48 No.

Crompton, Havells, Surya, Bajaj, Orient]

6b 5 (B) Flood Light (IP-65), Surge protection - 7266.95 No.

4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

(a) 120 watts [Approved Make - Philips,

Wipro, Crompton, Havells, Surya, Bajaj,

6c 60 (b) 250 watts [Approved Make - Philips, 10818.11 No.

Wipro, Crompton, Havells, Surya, Bajaj,

7 100 Painting of street light pole with bracket 265.63 No.

complete with two coats of Aluminium paint

for following size of pole.

(A) up to 6 mtr

8 500 Providing & laying approved make ISI 62.62 Mtr.

marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of

cable. The pipes as following size of dia &

weight per 6 mtr.

(A)50 mm outer dia [Approved Make - Dutron,

Universal, Duraline, Gamson, Dolphin, Rudra]

8a 1000 (B)63 mm outer dia [Approved Make - Dutron, 73.73 Mtr.

Universal, Duraline, Gamson, Dolphin, Rudra]

9 1 Supplying of folding platform ladder mfg. from 15963.01 No.

high tensile Aluminum alloy with non slip

corrugated steps & solid rubber shoes for leg.

Made from C-section 66 x 33 x 3.15 mm &

distance between two steps 12” center to

center having platform 16” x 8” (Anti Skid

Chequred Platform) on top. Rungs 21/2 flat

stripped steps or 1” dia non-slip corrugated

for 16 ft height.

10 1000 Supplying and erecting Flexible PVC 46.46 Mtr.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

(a) 1.50 Sq.mm 3 core round PVC sheathed

[Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

11 80 Supplying and erecting Street light pole 450.46 No

bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded

stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide /

PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr [Approved

Make - Sintex, National, EPP, Hensel, Green

11a 10 [B] Double Arm Bracket 0.5 Mtr [Approved 569.64 No

Make - Sintex, National, EPP, Hensel, Green

12 70 providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

13 7 Providing & erecting 415 V MCB Four Pole 595.90 No.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

13a 2 (B) 63 Amp. [Approved Make - Schneider, 737.30 No.

L&T, ABB, Siemens, Havells, MDS, C&S]

14 1500 Making trench in Hard Murrum / Tar Road of 74.74 Mtr.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault

all over the run and back filling the same and

making the surface as normal ground.

15 60 Providing and, fixing heavy duty flange type 38.38 No.

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

(a) 4 core 10 Sq. mm [Approved Make -

Avocab, Havells, Finolex, RRKabel, L&T,

15a 80 (c) 2 to 4 core 16 Sq. mm [Approved Make - 47.47 No.

Avocab, Havells, Finolex, RRKabel, L&T,

16 40 Providing and, fixing heavy duty flange type 66.66 No.

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables.

(a) 3 & 1/2 / 4 core 25 Sq. mm

17 500 Solder less crimping type Aluminium lugs 13.13 No.

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts

in an approved manner.

18 8 Supplying & erecting earth pit of minimum 4591.46 No.

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover. (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to

retain moisture for long time Necessary test

report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal

soilLength of pipe - 1 MtrBack filling

compound - 1 Nos Bag of 15 Kg.[Approved

make- Make will be approved by Engineer-in-

19 100 Providing & erecting PVC Corrugated Flexible 17.17 Mtr.

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

(1) 20 mm [Approved Make - Finolex, Dutron,

Swastik, Aashirwad, Suprime]

20 40 Providing and erecting HOT deep Galvanised 77.77 Kg.

iron strip wire 8 to 16 SWG.

21 90 Supplying & erecting approved make SMC 898.90 No.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

box.(A) 300mm x 200mm x 100mm [deep]

[Approved Make - Sintex, National, EPP,

Hensel, Green composites]

22 1 Supply of Approved make Iron Clad or metal 12240.19 No.

clad four pole change over switch 415V.

confirming to IS of following capacity

(B) 100 A / 125 A [ Approved Make -

Siemens, Schneider, L&T, ABB, Havells,

23 1 Erection & connection charges for 63 A / 68.68 No.

100A / 125 A change over switch as

(a)on existing wooden block / A.I.frame

24 4 Providing approved make junction box 20200.00 No.

outdoor type made from 1.6 mm thick

Stainless steel AISI 304. Confirm to IS

part-V Sheet .The box size 400 mm x300mm

x250mm deep . The junction box provided

with 1 nos 63A 4 pole MCB (Cat.III

C&S,L&T,siemens, havells make only),cable

termination kit suitable for 70sqmm to

120sqmm cable, 63Amp industrial-socket,

complete with internal wiring

sq.mm copper wire & suitable lugs, necessary

Accessories The box shall be provided with

front hinged door And locking arrangement,

rubber packing,bakelite sheet for erection of

above items in junction box and Danger

notice board on door.

(Welding Junction box at Spillway)

[Approved Make - Sintex, National, EPP,

Hensel, Green composites]

25 2 Supplying approved make Junction Box 21478.41 No.

outdoor type in two compartments made from

1.6 mm thick Stainless steel AISI 304 confirm

to IS 1570 part-V Sheet .The power

compartments size 400 mm and Control

compartment size 200 mm Junction box sizes

600 x 600x 300 mm with 300 mm leg made

from 35x35x3 mm angle complete fabricated.

The junction box provided with 3 Nos 32 A

MCB FP (C&S, L&T, Siemens) & 1 nos 63A

pole MCB ( C&S, L&T, Siemens) complete

with internal wiring 4 sq.mm copper wire &

suitable lugs. All necessary AccesS.O.R.ies

including the item. The box shall be provided

with front door hinged at one end. And locking

at other end, rubber packing should be

provided on closing door. And having cover

inside for M.C.B.& Danger notice board on

door. [Approved Make - Sintex, National,

EPP, Hensel, Green composites]

26 80 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S. angles,

square, round, flats, bars, channels, sections

complete with cutting, welding, grinding &

finishing duly painted with one coat of red

oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

27 100 Providing & laying approved make ISI 108.07 Mtr.

marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of

cable. The pipes as following size of dia &

weight per 6 mtr.

(A) 40 mm inner Dia. [Approved Make -

Dutron, Universal, Duraline, Gamson,

Dolphin, Rudra]

28 5 Labour charges for Magnetic brake servicing 795.28 No.

including cleaning, oiling, setting, testing &

connection wire cable from D.H.U. etc.& put

magnetic brake in operation in all respect.

29 3 Rewinding of Coil for Magnetic brake drum 2022.45 Set

dia. 7" and 5 1/2" by using Super enamel

Copper wire of suitable size. (Or as per

sample of dam site)

30 5 Labour charges for forward & reverse motor 593.26 No.

starter panel servicing & repairing including

supply of wire, ferrul, lugs & other misc. l

item, complete repairing & put into operation.

31 15 Providing & erecting Push button with 186.98 No.

elements. (BCH, L&T, Siemens, Tecknik or

equivalent make approved by Engineer in

32 15 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

33 5 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration certificate.

[Approved Make-Gelco, Meco, Schneider,

Siemens, Techno]

34 5 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. [Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

35 100 Supply of 6mm approved make SS 304 steel 202.00 No.

wire rope IS with erection existing high mast

with all necessary erection accessories.

36 1 Hydra charges for Removing foundation for 30300.00 Job

replacing rope wire and Led fitting and re-

erecting high mast existing foundation.

37 35 5Cx 2.5 EPR copper pcp sheathed rubber 404.00 Mtr.

38 60 Supplying and erecting B class Galvanized 326.23 Mtr.

iron pipe having smooth finished bore of the

pipe on both ends erected nuts and bolts

along the pole / wall shaping the pipe as per

site requirement. Pipe dia as following.

39 8 Providing cement concrete. foundation or for 4511.67 Cu.

concrete filling in 1:3:6 ratio with 20 to 25 mm Mtr.

stone metal duly plastered with necessary

curing for pole muffing or any other purpose.

40 500 By back old GI pipe. Panel board, cable, pvc 30.30 Kg -15150.00

pole box, old pole bracket, MCB, MS box all

electrical scrap item.

41 1 Supplying and erecting triple pole & neutral 3202.71 Rn.

440V / 500V panel mounting Copper Busbars Mtr

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.

(A) Suitable for 200 Amp. capacity

42 3 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

43 1 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. [Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

44 1 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration certificate.

[Approved Make-Gelco, Meco, Schneider,

Siemens, Techno]

45 3 Providing & erecting L.T. Current 274.72 No.

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

46 2 Supplying and erecting Ammeter / Voltmeter 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

47 3 providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A suitable to operate on

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

48 2 Supplying & erecting approved make Four 12241.20 No.

Pole 415V change over switch interior for

panel mounting with operating mechanism

A.C.23 duty confirming to IS for

(A)250A [Approved Make - Siemens,

Schneider, L&T, ABB, Havells, C&S]

49 2 Providing and erecting Approved make Four 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

ICS=100% of ICU only [Approved Make -

Schneider, L&T, ABB, Siemens, Havells,

50 2 Providing and erecting Approved make Four 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

51 1 Providing and erecting Approved make Four 8055.76 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

52 1 Providing & erecting 415 V MCB Four Pole 595.90 No.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

52a 5 (B) 63 Amp. [Approved Make - Schneider, 737.30 No.

L&T, ABB, Siemens, Havells, MDS, C&S]

53 3.60 Providing & erecting weather proof, dust & 14902.55 Sq

vermin proof, floor mounted front operated mtr

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.The panel size: 2.0 mtr(W) X

1.8 mtr (H)(A) The standard companies

switch gear shall be used and only

manufacturers at CPRI approved factory (i)

with 350mm depth [Approved Make- Make

will be approved by Engineer-in-charge]

54 1 Supplying and erecting Direct-on-line, Starter 2046.26 No.

with 15A.rating contractor and with 4-14A.

range, directly operated thermal overload

relay in sheet steel enclosure for 3phase

415V.50 c/s. A.C. motor up to

H.P.complete erected on P.W. Block with

necessary connection. [Approved Make -

Schneider, L&T, ABB, Siemens, Havells,

55 40 providing and erecting Mains with ISI marked, 17.17 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays,

power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts

and bolts if required.(A) One wire 1.50 sq.

mm [Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

55a 45 (B) One wire 6.00 sq. mm [Approved make - 56.56 Mtr.

Polycab, Havells, RRKabel, Finolex, Anchor]

55b 40 (C) One wire 10.00 sq. mm [Approved make - 91.91 Mtr.

Polycab, Havells, RRKabel, Finolex, Anchor]

55c 40 (D) One wire 16.00 sq. mm [Approved make - 142.41 Mtr.

Polycab, Havells, RRKabel, Finolex, Anchor]

56 80 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one coat

of red oxide with erection on site as per

direction of engineer in charge with necessary

grouting, cementing, plastering & finishing

57 1 Supplying and erecting triple pole & neutral 3202.71 Rn.

440V / 500V panel mounting Copper Busbars Mtr

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.

(A) Suitable for 200 Amp. capacity

58 3 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

59 1 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. [Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

60 1 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration certificate.

[Approved Make-Gelco, Meco, Schneider,

Siemens, Techno]

61 3 Providing & erecting L.T. Current 274.72 No.

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

62 2 Supplying and erecting Ammeter / Voltmeter 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

63 3 providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A suitable to operate on

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

64 1 Supplying & erecting approved make Four 12241.20 No.

Pole 415V change over switch interior for

panel mounting with operating mechanism

A.C.23 duty confirming to IS for

(A)200A [Approved Make - Siemens,

Schneider, L&T, ABB, Havells, C&S]

65 1 Providing and erecting Approved make Four 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

G.M.S.housing ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

66 5 Providing and erecting Approved make Four 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 63A. with

Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only [Approved

Make - Schneider, L&T, ABB, Siemens,

Havells, MDS, C&S]

67 21 Providing & erecting 240 V MCB double pole 278.76 No.

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

68 2 Providing & erecting 415 V MCB Four Pole 595.90 No.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

68a 4 (B) 63 Amp. [Approved Make - Schneider, 737.30 No.

L&T, ABB, Siemens, Havells, MDS, C&S]

69 3.60 Providing & erecting weather proof, dust & 14902.55 Sq

vermin proof, floor mounted front operated mtr

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket, heavy duty end terminal connection,

danger notice board, necessary ventilation,

earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.The panel size: 2.0 mtr(W) X

1.8 mtr (H)(A) The standard companies

switch gear shall be used and only

manufacturers at CPRI approved factory (i)

with 350mm depth [Approved Make- Make

will be approved by Engineer-in-charge]

70 40 providing and erecting Mains with ISI marked, 17.17 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays,

power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts

and bolts if required.

(A) One wire 1.50 sq. mm

70a 45 (B) One wire 6.00 sq. mm 56.56 Mtr.

70b 80 (B) One wire 25.00 sq. mm 91.91 Mtr.

70c 40 (C) One wire 35.00 sq. mm 142.41 Mtr.

71 70 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S. angles,

square, round, flats, bars, channels, sections

complete with cutting, welding, grinding &

finishing duly painted with one coat of red

oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

* All rates are exclusive of GST

I/We am/are willing to carry out the work at…………………….% above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our Quotation works out as under.

Estimated amount put to Quotation Estimated amount put to Quotation

Deduct……………% below Add……………….…% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge and as per GR No. MIS/102010/17(2)/k-1 of dtd. 29/01/2011 for which no extra

payment shall be made.

2. The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

5. The quoted rates should be inclusive of cost of minor rectification work which may have to be done for

correcting the distoration caused during transportation of the gate components.