WBPWD/AE/PESD-II/eNIQ-21/25-26

Supply of 1.1kv grade Al Armoured cable (Havells/Polycab/gloster) [NS]

2 core 10 sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(a)]

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)19mm dia 3mm thick Polythene Pipe

19mm dia 3mm thick Polythene Pipe [E-2/1(b)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm) [E-9/1(ii)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below.

2 Core 10sq mm [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

2 Core 10 sqmm [F-5/8(b)/iii]

S&F Street lights (60W)are aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and minimum IP 65 or higher protection. 10 KV SPD included, Efficacy ≥110/120 PW(Bajaj/Wipro/Majik/Surya/Havells/Philips) [NS]

S&F LED floodlight (150W)made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with Minimum IP65 or Higher protection. System efficacy >110/120 LPW 10KV SPD to be ordered separately.(Bajaj/ Wipro/Majik/Surya/HavellsPhilips) [NS]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachmen (Legrand/havells/standard)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection (legrand /havells /Standard)

40A DP Isolator (D-5/6)

Supply of 8.5 mtr ST Pole (410SP),Outside dia & thicness(11 4. 3x3 .6 5)mm,Middle dia & thickness(88 .9x 3. 25)mm,Top dia(76 .1x 3. 25)mm (Make-Jindal/Bansal/Calcutta pole) [NS]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paintUpto 9.0 mtr. long pole(i) 1st coat of aluminium paint over 1 coat of RO priming

(i) 1st coat of aluminium paint over 1 coat of RO priming [H-2/4(a)]

(ii) 2nd coat of aluminium paint over 1st coat[H-2/4(a)]

for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole (H-1/3(a/i)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the groundlevel as below:ISI medium [G-1/2(a))

Excavation of soil for installation of Earth Electrode and filling & ramming.For Soft Soil [G-1/1(a)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 4SWG [G-2/5(a/i)]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [C-3/18]

S&F 40 mm GI pipe ( ISI- Medium) quality 1.5mtrs. Average length having suitable bend S&F necy. Length of 1.5 sqmm pvc insulated single core stranded annealed copper wire and making conncetions as required and mending good damages to wall inncl. painting etc. [NS]

S&F 2.5 ft long 40mm dia double arm bracket with pole top cover [NS]

S&F GI loop box(8''x6''x4'')with 4stud connector with proper insulation.[NS]