Repair and renovation of Washroom (04Nos) with WC, Urinals,tiles,fittings etc. at NADP

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing the serviceable tiles to NADP office & rubbish off the premises etc. complete all as per the direction.

M&L Demolition of Brickwork or stone/ boulder masonry, built in in cement mortar or cement lime mortar etc. Complete all as per direction .

Taking down damaged cement plaster on brick /RCC/stone walls & floors etc. including raking out joints, hacking for key, scrubbing down with wire brush & watering, removing rubbish off at a distance 100 mt from site etc. complete all as per the direction .

Demolition of cement concrete floor of any description and in any position, removing the demolished /excavated material up to 100 mtr. deposited where directed etc. complete all as per the direction .

Excavating over areas, not exc 1.50 mt. deep in hard/dense soil & getting out the spoil, spread, leveled to a distance not exc. 150 mts. from starting point including de-watering etc. complete all as per the direction .

Demolition and breaking up drain pipes of bore dia150mm (Salt glazed stone ware, AC or Reinforced concrete) set in cement morter/PCC and removing rubbish up to a distance not exc. 50 mts. from starting point etc. complete all as per the direction .

M&L for taking down refixing in same opening of Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) etc. Complete all as per direction ..

Dismantling of Stone slabs/Granite partition and tiles of any description or thickness in floors, aprons etc. removing serviceable Stone to NADP store and rubbish off the premises etc. complete all as per the direction ..

M&L for moorum filling in floors & paving, laid in layers not exc. 15 cm thk. in each layer, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. Complete all as per direction.

M&L for hardcore of broken stone of gauge not exc. 63mm, deposited, spread, leveled in layers not exc. 15 cm thick, filing of voids with moorum, watered, leveled & rammed to a plain surface etc. Complete all as per direction.

M&L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in floor / hard standing, 75 mm thick, compaction of concrete with vibrator using necessary formwork, curing etc. Complete all as per direction ..

M&L for P.C.C. in floor / hard standing, 100 mm thick, Type- B1, 1:2:4 mix (using 20 mm graded aggregate) with finishing the surface even & smooth without using extra cement, Spike rolling to surfaces or making impression of expanded matel, whilst the concrete is green, compaction of concrete with vibrator using necessary formwork, curing etc. Complete all as per direction ..

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement Mortar of Ratio 1:4 and curing, etc. Complete all as per direction ..

M&L for rendering/plastering 12 mm thick on fair faces of brick work or concrete surfaces and finished surfaces even and smooth (without using extra lime or cement), curing etc. Complete all as per direction ..

M&L Cement concrete Type B1 1:2:4 ( 20MM graded aggregate) for coping over wall, slightly rounded or chamfered angles and throating with necessary formwork, compaction, curing etc. Complete all as per direction of E-I-C

S&F TMT bars 10 mm dia. and over ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per the direction ..

S&F TMT bars 6 to 8 mm dia. ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete all as per the direction ..

S & F PVC (SWR) soil, waste & vent pipes of bore dia.110mm, single socketed, in any length with rubber ring joints, laid in trench or fixed on floor, pipes to be fitted to PVC fittings with solvent cement, including all necessary accessories required & fixed etc. complete, as per the direction ..

S&F PVC (SWR) junction single, (single 'T'), equal or unequal, bore dia. 110 mm in any length with rubber ring joints, laid in trench or fixed on floor, pipes to be fitted to PVC fittings with solvent cement, including all necessary accessories required & fixed etc. complete, as per the direction ..

S&F PVC (SWR) Bends equal or unequal without access door diminishing pieces or tapers to fixed on soil, waste & vent pipes, of bore dia.110mm, with rubber ring joints, laid in trenches or in floors, including all necessary accessories required & fixed, etc. complete as per the direction ..

S&F PVC SWR Vent Cowl, bore dia. 110 mm in any length with rubber ring joints, laid in trench or fixed on floor, pipes to be fitted to PVC fittings with solvent cement, including all necessary accessories required & fixed etc. complete, as per the direction ..

S&F PVC SWR 'P' Trap, bore dia. 110 mm in any length with rubber ring joints, laid in trench or fixed on floor, pipes to be fitted to PVC fittings with solvent cement, including all necessary accessories required & fixed etc. complete, as per the direction ..

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with deco rative face veneer with lipping/frame to match etc. Complete all as per direction ..

S & F Solid PVC factory made moulded Door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M. S. square tube, supplying & fixing in opening, as per SSR specification & drawings, etc. Complete all as specified & directed.

S&F 30mm thick factory made moulded door shutters - wood free (Make- Rajshri/Reliable/Sintex) consisting of frame made out of M. S. tubes 20 gauge thickness and size of 20mm x 40mm for stiles, top, bottom and lock rails also. M. S. Frame shall have a coat of steel primers. The inner panel shall consist of 20mm thick multi chamber hollow PVC section with 1mm wall thickness, bonded with 5mm thick PVC sheet of density 600Kg/Cum manufactured by an ISO-9000 Certified company, termite proof, water proof and fire-resistant moulded PVC Sheet 2, 4, 6 raised panel designs in different plain after routing the moulded design on one side & 5mm plain PVC sheet on other side of the hollow section. The edge of panel to be sealed with lipping of 10mm wide PVC Sheet baton (made by sticking 2 Nos. rigid foam PVC sheets of 5mm thickness using PVC solvent cement) and stile sides 20mm (5mm x 4 Nos.) thick and 6” x 4” size PVC Sheet fitted along M. S. tube for lock provision at lock height of inner side of hollow panel. Door edge lipping to be painted with PVC ink of matched colour of Plain/prelam moulded sheet of door etc. complete as per manufacturer’s specification /drawings & as direction ..

M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) with required any sunk or raised moulding etc. complete all as per direction.

S&F warm Ceiling Light 9watt (Reva Model No. IDL-WHT-LARP01R009XW-WW) etc. Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

M&L for fixing of gloss/mat finishing vitrified ceramic tiles 8 to 10 mm thk. 1st quality (Premium), polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors & color as per site requirement. Tiles are as per IS specification, Make - Simpolo/Qutone/Nitco/Johnson or its equivalent only acceptable, with bedding layer of 25 mm thick in C:M 1:4, or jointed with tiles adhesive such as Pidilite, Farainsto, CICO, Choksey etc., Filling of joints with white or colour pigments/epoxy/adhesive to match the shade of tiles, curing etc. complete all as per the direction ..

M&L for fixing of gloss/mat finishing ceramic tiles 8 to 10 mm thk. 1st quality (Premium), polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in wall/vertical surfaces & color as per site requirement. Tiles are as per IS specification, Make - Simpolo/Qutone/ Nitco/Johnson or its equivalent only acceptable, filling of joints with white or colour pigments/epoxy/adhesive to match the shade of tiles, such as Pidilite/ Farainsto/CICO/Choksey, curing etc. complete all as per the direction ..

S&F curved shaped Urinal Partition with frosted glass 10 mm thick, chrome finished (Jaquar Model No. 1810-UC/1110UC), (Size- JSE-CHR- 11OUC450X, H-900, W-450) & fix in wall with adhesive/screw etc. Make- Jaquar/Cera/Parryware or its equivalant accepatable only, complete all as per direction ..

M&L for 20 mm thick Granite (colour Z-Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc. Complete all as per direction ..

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas using Type B1 1:2:4 (20MM graded aggregate) with plain fair faces & setting in cement mortar 1:6 with joints to match, curing etc. complete all as per the direction of E-I-C.

S & F Anodised Aluminium frame for doors, windows, ventilators, with fix/track as per site requirement, fixing in brick/concrete surface with one or more rebates including joining cleat for fixing, screw, rubber packing etc. Complete all as per direction ..

S & F Anodised Aluminum window and ventilator shutters, fixed/sliding/ swing type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, rubber packing etc. Complete all as per direction .

S & F Sheet glass, ordinary quality and glazing, with frosted on one side, 4.8 mm thick, size in square/ rectangle exc. 0.50 sqm in each pane to fix in alluminium/steel/pvc fitting of door, window, ventilators, partition shutters etc, make- Modiguard/Saint-globin/ ISI mark only accepted complete all as per the direction ..

S & F Point wiring One light point or one fan point controlled by one switch with cables 1.5 sq. mm size, PVC sheathed cable, wiring with Copper conductor cables in PVC casing & caping (Make:- Polycab, Havells, Finolex or its equivalant) drawn through PVC 1” conduit pipe having 25 mm & 2 mm thick with all accessories & continue run earth wire 14 SWG, etc. Complete all as per direction ..

M&L Modular switches fix in modular cabinet

M&L Modular switches boxex (Fix 08 switches in one boxex)

Taking down point wiring

S&F Modular Exhust fan 300x300 mm

S&F Urinal pod in wall with spreader Hole and fixing accossories, (Jaquar Model No. URS-WHT-13261H). Size- 355x340x535 mm.+Urinal Sensor Make- Jaquar / Cera / Parryware or its equivalant accepatable only. including removal of exisiting urinals complete all as per direction ..

M&L thin Rim table top Basin, shape- Rectangular (Jaquar Model No. JDS-WHT-25909) Size 495x395x150 mm.Make- Jaquar/Cera/Parryware or its equivalant only accepatable, including removal of exisitng basin complete all as per direction ..

S&F Choromium plated, brass, Pillar Cock with extension body (Jaquar Model No. FLP-2021PM) for wash basin and fix in granite top etc. Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

S & F One Vitreous China wash basin, white, flat back size 450 x 300 mm including brackets, cutting for any pinning in ends of brackets or erecting stand, including its fitting such as One PVC connecting pipe bore-15 mm with nuts of length 450 mm, screwed for iron pipe, One waste fittings 32 mm, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc. make:- Parry were/hind-ware /Plasto/Pride/Finolex/ Prince/Prayag only accepted etc. Complete all as per direction ..

S&F Choromium plated, brass, Pillar Cock (Jaquar Model No. FLP-5011PM) for wash basin etc. Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

S&F WC Pan Rimless Boowl with Cistern for coupled WC with UF soft close slim seat cover, hinges, duel flush cistern fitting, fixing accessories and accessories set, (Jaquar Model No. ONS-WHT-10853S300UFSM). Size- 385x720x710 mm, S Trap-300 mm. Make- Jaquar/Cera/Parryware or its equivalant accepatable only, including removal of existing WC, complete all as per direction ..

S&F Hand shower (health faucet) with 8mm Dia. 1 meter long flexible tube & wall hook and fix in wall etc. (Jaquar Model No. ALD-573) Make- Jaquar /Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

S&F angle cock Make- Jaquar /Cera/Parryware or its equivalant accepatable only.

M&L Concelled G. I. water tubes ISI mark, (Bore 15 mm) ‘medium grade’ galvanized, with all fitting and fixed complete to walls and ceiling or laid in floor with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc. also for cutting, screwing and waste and for making forged bends on piping as required Complete all as per direction.

M&L PVC pipe Size 50 mm with its fitting like elbow,T,end cap etc and fix in urinal and wash basin outlet fittings.....

S&F Toilet Roll Holder with Stainless Steel Flap (Model No. AKP-35753PS) Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

M&L shop dispenser with glass bottle and fix in wall etc. (Jaquar Model No. CAN-1135N) Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

S&F Swing Single Mirror (Model No. ACN-1195N) size- 615x445 mm Oval Shape, fix in wall etc. Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

S&F Stainless Steel Single Towel Rail 600 mm long (Model No. ACN-1111SM). Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

M&L electrical hand draier, bolt touch-free infrared hand dryer with 1150W rated power & carbon brush mortor, material- 304 stainless steel (Jaquar Model No. HDR-SSF-AK2803D). Make- Jaquar/Cera/Parryware or its equivalant accepatable only. complete all as per direction ..

Please Enable Macros to View BoQ information