PROVISION OF STREET LIGHT AND HIGH MAST LIGHT AND OTHER CONNECTED WORKS AT CSD DEPOT RAMGARH CANTT

Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width or not exceeding 10 Sqm on plan and not exceeding 1.5m getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes, foundations, laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 Metre distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

M&L sand filling in cable trenches for cable protection for clean dry sand unwashed including gently punning in a layer of 15 cm and 8 cm (total 23 cm) in thickness all across the laid portion of LT cable in trenches complete all as specified and directed. (Note:-Punned thickness shall only be considered for payment)

Supplying & Laying factory made reinforced pre-cast flat concrete cable protection cover of class LV , type- I, size 250 mm x 150mm x 40mm, complete all as specified and directed by the Engineer-in-Charge.

M & L for cement concrete for copying of poles using B1 1:2:4, 20mm graded aggregate,smooth finishing without using extra cement complete all as specified and directed.

M & L for cement concrete for foundation fillings and mass concrete type C2 1:3:6 using 40mm graded aggregate complete all as specified and directed.

M & L for cement concrete for foundation fillings and mass concrete type D2 1:4:8 using 40mm graded aggregate complete all as specified and directed.

Supply, installation, connecting of high mast lighting system comprises with 16 mtr hight galvanized mast, in two section, 3mm secondary thickness, top dia 150mm, bottom dia 340mm circular frame ( made of galvanized iron rolled section) for fixing of 08 Nos energy saving environmental friendly, long life, exclusive innovative die cast aluminum IP 65 flood light with high power LED as light source and including necessary cable 1100 volts grade with copper conductor multi stranded of size from control gear box symmetrically fitted, having two point suspension system with steel rope 8 mm dia double drum which suitable for both electrically motorized and manually operation including control panel ( comprising contactor, isolator of suitable size), connecting copper cable ( flexible) of size 4 core x 10 sq mm of required length, aviation obstruction light, light, lightning arrester spike and necessary excavation of earth work for RCC foundation of PCC 1:3:6 as per requirement with suitable size of nut and bolt as per manufacturer specification complete all as specified and directed by the Engineer-in-Charge Note:- Flood light shall be measured and paid seperatly under respective item.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast housing and heat shrink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics,high power LEDs as light source and electronic driver of capacity 210 watts with prewired suitable for sports light and necessary mounting arrangements,provision of new 3 core multi stranded copper conductor of size 23/0.193 from high mast terminal to fitting complete all as specified and directed by the Engineer-in-Charge. Make: Bajaj Cat part No. BJFL 180W LED or its equivalent in Wipro, phillips. (for high mast light).