Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
18 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
120 days
Expenditure
Revenue
ELECTRICAL
3 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (As per Clause No. 10.2 of tender form 2nd sheet Annex. I Part-I of GCC APRIL- 2022, with up to date correction slip.)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b)Definition of Similar nature of work: - "Supply, Installation, Testing & Commissioning of 11kV and above overhead or underground lines".
ELECTRICAL CONTRACTOR LICENSE-(i)The Contractor should have valid A-Class Electrical license to be submitted along with tender failing which tender would be consider ineligible (i.e. not eligible). (ii)The work shall be carried out by the contractor, having valid Electrical Contractor's License for carrying out installation work under the direct supervision of the persons holding valid certificates of competency issued by the State Government.(iii)The successful tenderer shall furnish the names and particulars of the certificate of competency of supervisor and workmen to be engaged for carrying out this work.
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Supply and erection of 11 kV HT line for provision of 11 kV/440 V power supply arrangement from Ruchi Soya factory (ESD- Bhabhua, Circle- Sasaram) at DGON/IMSD and DGON Station under CGM/DDU /DFCCIL Unit.
DFCC-DDU-EL-GS-DGON-T018R~EDFC
DFCC-DDU-EL-GS-DGON-T018R
Open
Works - General
12 Months
Chandauli, Uttar Pradesh
₹5,900
₹2.1 L
27 Aug 2026
27 Aug 2026
4 Sept 2026
140 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Above/ 8567030.99 Below/P | ||
| — | 30.00 | — | — | ||
| Rail pole 13 Meter,(60 kg per metre ) | — | — | — | 16,71,141.9 | |
| — | 27.00 | — | — | ||
| Rail pole 11 Meter,(52 kg per metre ) | — | — | — | 11,38,995 | |
| — | 41.00 | — | — | ||
| 11 KV Rail pole V cross arm (75x40x6)MM | — | — | — | 42,275.92 | |
| — | 41.00 | — | — | ||
| 11 Kv Rail pole Top bracket/ F CLAMP | — | — | — | 8,962.6 | |
| — | 82.00 | — | — | ||
| Back Clamp for Rail pole V and top bracket (50x8 mm) | — | — | — | 12,486.96 | |
| — | 41.00 | — | — | ||
| Packing Piece | — | — | — | 9,611.63 | |
| — | 8.00 | — | — | ||
| 11 KV Rail pole Line D.P.Top Channel (75x40x6 mm) | — | — | — | 24,768.32 | |
| — | 8.00 | — | — | ||
| 11 KV Rail pole D.P. Channel Support Clamp A (50*8 MM) For line base channel | — | — | — | 1,875.44 | |
| — | 8.00 | — | — | ||
| 11 KV Rail pole D.P. Channel Support Clamp B (50*8 MM) For line base channel | — | — | — | 1,875.44 | |
| — | 8.00 | — | — | ||
| 11 KV Rail pole D.P cross bracing angles (50x50x6 mm) | — | — | — | 29,388.48 | |
| — | 64.00 | — | — | ||
| Back Clamp for cross bracing (50*8mm)Rail pole | — | — | — | 9,567.36 | |
| — | 37.00 | — | — | ||
| Psc pole 9 metre 400 kg | — | — | — | 1,20,894.54 | |
| — | 35.00 | — | — | ||
| 11 KV Psc pole V cross arm (75x40x6)MM | — | — | — | 36,476.65 | |
| — | 35.00 | — | — | ||
| 11 KV Psc poleTop bracket/ F CLAMP | — | — | — | 8,649.9 | |
| — | 35.00 | — | — | ||
| Back Clamp for Psc pole V cross arm(50x8 mm) | — | — | — | 5,884.55 | |
| — | 35.00 | — | — | ||
| Back Clamp for Psc pole top bracket (50x8 mm) | — | — | — | 5,609.8 | |
| — | 1.00 | — | — | ||
| 11 KV Psc pole Line D.P.Top Channel (75x40x6 mm) | — | — | — | 3,096.04 | |
| — | 1.00 | — | — | ||
| 11 KV Psc pole D.P. Channel Support Clamp A (50*8 MM) For line base channel | — | — | — | 273.5 | |
| — | 1.00 | — | — | ||
| 11 KV Psc pole D.P. Channel Support Clamp B (50*8 MM) For line base channel | — | — | — | 273.5 | |
| — | 1.00 | — | — | ||
| 11 KV Psc pole D.P cross bracing angles (50x50x6 mm) | — | — | — | 3,711.77 | |
| — | 8.00 | — | — | ||
| Back Clamp for cross bracing (50*8mm) Psc pole | — | — | — | 1,889.76 | |
| — | 45.00 | — | — | ||
| Stay set(Galvanised) with 50*10 mmstay clamps,guy insulator(2 no.s) ,anchor plate(300*300*8 mm),nut bolts,2 nos turn buckles,1.8 m long ,20mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete | — | — | — | 1,46,970 | |
| — | 45.00 | — | — | ||
| Stay Clamp (50X8 mm) | — | — | — | 10,549.35 | |
| — | 60.00 | — | — | ||
| 11 KV polymer disc insulator With hardware fittings | — | — | — | 21,133.8 | |
| — | 255.00 | — | — | ||
| 11 KV polymer Pin insulator with GI Pin | — | — | — | 37,839.45 | |
| — | 3.60 | — | — | ||
| 11 KV Insulated Cable (99) sqmm(Project Rate) | — | — | — | 7,94,556 | |
| — | 4.20 | — | — | ||
| A.C.S.R. Rabbit conductor | — | — | — | 2,04,633.24 | |
| — | 76.00 | — | — | ||
| Earthing set complete with GI wire (8 SWG)Pipe Earthing,3.0 Meter Complete earthing( supply of earthing pipe,earth clamp,nut & bolt, charcoal/Bentonite powder, salt) | — | — | — | 1,38,472 | |
| — | 9.00 | — | — | ||
| Pipe Earthing,4.5 Meter Complete earthing( supply of earthing pipe,earth clamp,nut & bolt, charcoal/Bentonite powder, salt) | — | — | — | 26,917.83 | |
| — | 60.00 | — | — | ||
| Jumpher connector | — | — | — | 5,100 | |
| — | 100.00 | — | — | ||
| Aluminium winding wire | — | — | — | 20,048 | |
| — | 250.00 | — | — | ||
| M.S. Nuts and Bolts all size | — | — | — | 24,750 | |
| — | 2.00 | — | — | ||
| Angle bracket (50*50*6) mm for guard wire | — | — | — | 3,122.3 | |
| — | 4.00 | — | — | ||
| Back Clamp (50*8)for angle bracket | — | — | — | 597.96 | |
| — | 4.00 | — | — | ||
| Support Clamp for angle bracket | — | — | — | 927.04 | |
| — | 40.00 | — | — | ||
| G.I. wire no. 8 for guard wire | — | — | — | 2,230.8 | |
| — | 1200.00 | — | — | ||
| 11 KV X.L.P.E.U.G. Cable 300 sqmm | — | — | — | 19,43,040 | |
| — | 12.00 | — | — | ||
| 11 KV X.L.P.E.U.G. 300 mm end joint kit | — | — | — | 95,940 | |
| — | 36.00 | — | — | ||
| G.I. Pipe 150 MM For cable raising 3 Mtr. Each side | — | — | — | 25,200 | |
| — | 12.00 | — | — | ||
| Pipe Clamp | — | — | — | 1,380 | |
| — | 24.00 | — | — | ||
| Pipe Support Angle and clamps | — | — | — | 49,812 | |
| — | 924.00 | — | — | ||
| HDPE PIPE 160MM DIA | — | — | — | 10,53,360 | |
| — | 4.00 | — | — | ||
| 11 KV 630 A AB switch | — | — | — | 75,992 | |
| Lumpsum 100000.00 | 1.00 | — | — | ||
| Sundries | — | — | — | 1,00,000 | |
| — | 85.00 | — | — | ||
| Danger Board | — | — | — | 5,780 | |
| — | 85.00 | — | — | ||
| Barbed Wire | — | — | — | 6,375 | |
| Lumpsum 317297.58 | 1.00 | — | — | ||
| Transportation | — | — | — | 3,17,297.58 | |
| Lumpsum 158648.79 | 1.00 | — | — | ||
| Storage | — | — | — | 1,58,648.79 | |
| Lumpsum 158648.79 | 1.00 | — | — | ||
| T&P | — | — | — | 1,58,648.79 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
NIT.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlip_compressed.pdf GCC Correction Slip
ATTACHMENT
GCCAmendment_1.pdf
ATTACHMENT
GCCCorrectionSlip_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].