SPL REPAIRS TO OR MD ACCN BLOCK NO P169 AT ASHOK NAGAR AND FENCING AT ESH BLDG NO 118 AND CERTAIN REVENUE AND MINOR WORKS UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing.

Dismantling timber in fillets,rafters,purlins etc. under 40 sqcm in section unframed work

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A)

M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 07 above but fix in valley gutter / ridge

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets

S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing 9mm thick Acoustical board/tiles for insulation and accoustic purposes, (60x60) cm in size, fixed in celing with screws to frame work or with staples on snap grid, hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specied and as directed.

M & L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in finish surface of water tank staging complete all as specified and directed.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces cleaning the surfaces and removing the debris outside MOD land.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of incl admixature of as per manufacture recommendation(WPC to be measured seperately) finished even and smooth.

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under:- (a) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm and laying APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.60kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete.The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer.Top surface shall be applied with 0.15 Kg/Sqm bitumenous aluminium 2 coats of paint. .

Dismantling of PVC water tank of capacity upto 500 litre complete all as specified and directed.

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 22 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M&L for Non-skid white Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300mm x 200mm x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 165 X 60mm.

S & F for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded all as specified.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod fixed to brackets complete all as specified and directed.

M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 58 above but bore of pipe 20mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm

Fixing only tubes, any grade, to walls and ceilings or laying in floors, bore of pipe 15 mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20 mm

Fixing only tubes, any grade, to walls and ceilings or laying in floors, bore of pipe 20 mm

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs Brass cromium plated with capstan heads shower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Two coat of synthetic enamel paint on New steel surfaces over 10 cm width or girth incl prepration of surfaces complete

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

S&F Anodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C) any section embedded in concrete work including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh, any type complete all as specified

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface in hard/dense soil

M&L for Cement concrete type C2 1:3:6 (using 40mm graded aggregates) as in retaining walls, any thinkess, size or shape including pilasters, buttresses columns, pillers, boundary and post (including caps and bases)

S&L Mild steel work post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confiorming to round bars Fe-410-W (Gde.E-250) quality A- or Fe 290 (Gde-E-165)

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm

Supply only Chain link MS galvanisd fencing 3.8 mm dia wire, made into mattresses laped wired laid in position all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight n.exc 4 Kg per Sqm metre as approved by Engineer- in-Charge

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for two coat of Black bituminous paint including preparation of surfaces of steel , iron , concrete surfaces.

Dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets exceeding 15cm complete all as directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work incl dismantling of scantling and rubbish off the premises all as specified and as directed.

All as per serial item No.10.00 here-in-before but except timber.

Dismantling of wooden boarding any description and in any position complete all as directed.

Surface dressing not exceeding 15 cm deep in soft/loose soil

Excavation over areas n.exc 1.5M deep and getting out in hard/dense Soil complete all as specified and directed

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depthin soft/loose soil for foundation , etc or for shafts, wells,cesspits, manholes pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out all as specified

M & L for Moorum/red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for hard core of gauge n.exc.63mm hand broken stone deposited,spread and levelled in layer n exc.15cm thick watering and rammed to a true surface.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base 150mm thick.

M&L for cement concrete 1:2:4 Type B-2 (using 40mm graded stone aggregate)100 mm thick in floor and courtyard, finished cement surfaces even and smooth without using extra cement complete all as specified

M & L for 75 mm thick PCC 1:3:6 type D2 (using 40 mm graded stone aggregate) in sub base for floor tiles complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

M & L for PCC 1:4:8 using 20 mm stone aggregate in foundation Type D2

Supply,fabrication and errection for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade St.-240,as in main Columns/ Posts cross beams and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base 100mm thick.

Material and labour for non skid ceramic tiles coloured tiles 7 to 8mm thick area of each tile exc. 0.18Sqm but not exc. 0.38 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for precast cement concrete glazed interlocking tiles,paver block, any shape and size as approved ,60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid over 30mm thick sand cushioning .laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

E/M Portion

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge

25 Sqmm x 3.5 Core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Soft / loose soil

Hard dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-

(a) One light point controlled by one switch

(b) One fan point controlled by one switch & regulators

(f) One socket 5 pin 5 Amps flush type on independent board

(f) One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 2.5 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 2.5 sqmm cable and one run of PVC casing capping will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

S&F MCB SP 240 volts 6-32 Amps

S&F isolator SPN 40 Amps 240 volts

Supply and fix in repair LED Fitting 18 Watts LED MODEL:LHEXBQP71NWO18 MAKE :Havells or Equivalent

S&F in repair LED Security Light fitting of 25 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65 for 1Wx18 Nos LEDs and Driver all as specified & Directed. Make : ENDURAPEARLS25WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

Supply and fix in repair LED Fitting 9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXBLP7IN1W009 MAKE :Havells or Equivalent in Philips/Bajaj/HPL

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Supply and Lay pipe galvanised Medium class including fitting complete 80 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia

Supply and fix gate valve stop screwed 20 mm

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

(a) Soft / loose soil

(b) Hard / dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately

H S TAKHI

DR J S CHADHA AND SONS

RAMESH PATIL

KARPE AND SONS CONSTRUCTION

M/S BHASKAR MANIKRAO PAWAR

Ridhi Constructions