Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
14 Sept 2026, 3:00 pm
Assistant Executive Engineer
PH sub Division Kerala Water Authority Chavara
State Plan-RWSS to Thazhava-2026-27 Providing roofing at panchayath office, Parankimamvila Pump houses in Thazhava Panchayath-General Civil Work
2026_KWA_864491_1
WRD/KWA-CE(SR)/TR/12063/2026_5
Open Tender
Civil Works - Water Works
Percentage
90 days
Thazhava
Please refer Tender documents.
6 documents required · 6 mandatory
₹335
Yes
Yes
14 Sept 2026
6 Aug 2026
16 Sept 2026
6 Aug 2026
14 Sept 2026
6 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Roofing works at Vattathara, Parankimamvila and panchayath office pump house | |||||
| 1.001 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kg | 140.41 | - |
| 1.002 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | 842.14 | - |
| 1.003 | 10.20:Providing and fixing bolts including nuts and washers complete. | - | kg | 175.75 | - |
| 1.004 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | - | sqm | 252.95 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
KWAGeneralConditionsforeTenderingV5.pdf
PDF • 0.69 MB
Tendernotice_1.pdf
PDF • 0.04 MB
document1.pdf
Tender Documents • 0.60 MB
BOQ_1462745.xls
BOQ • 0.23 MB
Thazhavacorri.pdf
PDF • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].