Addn Altn Upgradation of old Md Accn at Jamnagar Mil Stn

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

M&L Joint-free coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 complete all as specified and as directed.

M&L Coloured Vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm in floors/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 as bedding complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bedding in CM 1:4 complete all as specified and as directed.

M&L Jointfree Non-skid Coloured ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bedding in CM 1:6 complete all as specified and as directed.

M&L Joint free Non-skid Coloured ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bedding in CM 1:4 complete all as specified and as directed.

M&L 20-25mm thick Machine cut & polished Kota stone slab as in cill of windows laid in single piece over and including 20mm thick screed bed in CM 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L 20-25 mm thick Machine cut & polished Kota stone slab fixed as cupboard shelves / partition including necessary fixing glue / araldite / cleats reqd complete all as specified and as directed.

All as per Ser Item No. 09 above but as in vertical portion of skirting, etc laid over 10mm thick bedding layer in CM 1:4 complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 Sqm and n.exc 4.00 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

Taking down chowkat or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutter of any description not exc 1 Sqm each complete all as specified and as directed.

S&F Pressed steel frames for doors of size 125 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F Pressed steel frames for doors of size 105 mm X65 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L providing cement concrete type B-0, 1:2:4, using 12.5 mm graded aggregate as in filling under pressed steel hollow door section of any size or dimension complete all as specified and as directed.

M&L preparation surfaces & applying one coat of black bituminus paint on surfaces of any description of wood, steel, iron, concrete, brick, stone, etc., exceeding 10 cm in width or girth complete all as specified and as directed.

S&F 35 mm thick Flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F factory made 2nd class hard wood 35mm thick glazed & skeleton door shutters, open rebated and prepared to receive glass/gauge etc (without sash bars) edges of framing plain, chamfered etc, size of members of shutters as specified in SSR Pt-I, Sec-8 Clause 8.20 (a) without sash bar etc complete

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of old painted surfaces of wood/ wood based materials of any description and applying one coat of synthetic enamel paint not otherwise described over 10 cm width or girth complete all as specified and as directed.

M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F powder coated anodised Aluminium alloy sections 3 tier track sliding windows (2 glazed shutters and 1 gauzed shutter) with frames of Series-C with shutter section 20mm thick of Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0mm nominal thickness, stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles etc. complete all as specified and directed. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified. Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with second class hard wood beadings complete all as specified and as directed.

S&F powder coated anodised Aluminium alloy deco grill of 6 mm dia (powder coating not less than 50 micron) complete all as specified and as directed.

S&F 100mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified.

S&F 140mm Floor door stopper of anodised aluminium alloy body and tongue with hard drawn steel spring, fixed complete all as specified and as directed.

S&F 100 mm stainless steel butt hinges, medium weight complete all as specified.

S&F 75 mm stainless steel butt hinges, medium weight complete all as specified.

S&F Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges

S&F Stainless steel Curtain Rod of Decorative pattern as approved by Engr-in-Charge.

S&F Stainless steel Curtain Rod Bracket decorative type all as directed and approved by Engr-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia complete all as specified and as directed.

Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 25 mm dia Steel water tubes 'medium grade', galvanised, with all fittings and concealed complete to walls and ceilings or laid in floors including cutting grooves, filled with cement morter in CM 1:4 complete all as specified and as directed.

S&F 25 mm bore Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Demolition of cement (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed.

M&L 5mm thick rendering in cement plaster 1:3 with WPC on bottom and side walls of sunken floor incl finished even and smooth w/o using extra cement all as specified.

M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holesbefore filling lean concrete( preparing existing surface and applying apoxy reisin and hot blown bitumen over Ser No 51 is measured and paid under this item) complete and all as specified as per manufacturer instruction.

M&L PCC type E-2 1:5:10 (40 mm graded stone aggr) as filling in sunken floor after applying appropriate treatment to side walls complete all as specified and as directed.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection etc complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and as directed.

M&L 100 mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in subbase of floor etc complete all as specified and as directed.

S&F Machine pressed precast Concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 grade all as specified and directed.

M&L sand cushing/filling under paver block as specified and directed.

M&L Providing type B1 (1:2:4) , cement concrete in apex stones, bed plates, kerbs , slightly rounded or chamfered angles and throating, as directed

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plaster,.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of stone surfaces complete all as directed by Engr-In-Charge..

M&L for applying 3mm thick wall care putty on Internal wall all as directed and specified. (Make : Birla wall care putty/JK wall care putty/ Berger Wall care putty)

M&L for rendering 20 mm thick rendering in two layers in 5 mm thick rendering in CM 1:4 over a coat of 15 mm thick rendering 1:6 on the external surfaces of Stone surface finishing fair and even without using extra cement. all as directed by Engr-In-Charge

M&L for rendering 5 mm thick in CM 1:4 on ceiling to be finished complete all as directed by Engr-In-Charge

Preparation of new ceiling surface and applying 3 coat of white wash .

M&L for preparation of plastered or unplastered surfaces of walls any width or girth etc and applying two coats of exterior weather coat paint (apex Ultima) complete all as specified and as directed by the Engr-in-Charge

M&L for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall etc complete all as specified and directed.

M & L for preparing New plastered surface and appling two coats white wash on wall all as directed.

Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspendedwork

Demolition existing RCC tank and cupboard shelves and removal of debris as shown at a distance of 2 km leveled/spread properly.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.1000 ltr capacity

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.500 ltr capacity

S&F Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed in repairs

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.

S&F in repairs PVC(SWR) bend any radius, 75 mm dia.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent.

S&F fancy type CP bib taps, 15 mm bore with crutch or , screwed down, fixed as in repairs.

S&F CP Pillar taps 15 mm dia, capstain head, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F stop valves chromium plated with long shank and cup (concealed type) 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed as in repairs.

S&F Soap dish any type fixed to plugs with chromium plated brass screws.

S&F Vitreous china squatting pan, 'Orrisa' pattern , size 580x440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe)

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S&F 15 mm bore Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm.

S & F Stainless steel Kitchen plate racks 1mm thick over all size 31" x36 x10" ( Make : Prayag cat No P-346 or equvilent).

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with.

M&L Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with.

S&F Welded steel wire fabric of weight exc 3.5 kg/Sqm and N. exc 4 kg/ Sqm, fixed to steel members with spikes complete all as specified nad directed

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing mild steel welded fabric of weight exceeding 3.5 kg but n Exc 4kg /Sqm with existing bars or by welding on it (supplymentary bars wiil be measured and paid separately). Applying eppoxy bonding agent and making good with polymer modified plaster and micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor as folowing given below :- . (a) Modified plaster 10 mm to 20 mm thick

(b) Micro concrete 40 to 50 mm thick including form work.

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls etc by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it (supplymentary bars wiil be measured and paid separately).Applying eppoxy bonding agent and making good with polymer modified plaster and micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in second floor as folowing given below :- . (a) Modified plaster 10 mm to 20 mm thick

(b) Micro concrete 40 to 50 mm thick including form work.

M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm all as per manufactureres instruction. (Upto 5 mtr height) including necessary chiping/taking down loose concrete all as directed.

Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land.

M&L Average 50 mm thk Cement concrete type B1 , 1:2:4 (20 mm graded aggregate) as in levelling course/padding with slope 1:40 all as directed

M&L for Rendering 10 mm thick in CM (1:3) on padding course, with WPC @ 3% by wt of cement all as directed.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Supply of integral water proofing compound

S & F in repairs 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified

M&L Pre cast cement concrete block type C-1 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in width and setting in CM 1;6 complete all as specified.

S&F in repairs Central Hole Basin Mixer, cast copper alloy,chromium plated, including taking down old unservicable one. Make : Prayag 8550 or equivalent approved product of MARC/ESSESS.

Supply & fix Hand Shower (health faucet) alongwith 1.2m flexible tube. Make : For hand shower, JAQUAR Code-ALD-573 or equivalent approved product of MARC/ESSESS.

Supply & fix CP Toilet roll Holder fixed to walls with chromium plated (CP) brass screws. Make : Prayag Cantibile ' Cat No BA-48 or equivalent

Supply and fix CP corner glass shelf with bracket fixed with screws complete all as directed by the Engr-in-Charge. Make : Prayag CAT No BEA 46 or equivalent

S&F450mm long PVC Connection pipe 15 mm dia.

Supply & fix 6" Overhead Shower alongwith shower arm casted, fixed to 15mm bore pipe or union.Make : Overhead Shower- Prayag Cat no BOS-90S or equivalent approved product of MARC/ESSESS.

S& F bottle trap 7" (project) Cat No : BEA -23 Make : Prayag,cera or equalant

S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F 32 mm Dia bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repairs CP three way wall mixture for mixing hot & cold water screwed down for iron pipe and fixed (Make PRAYAG CAT No 7270 or equalent)

S& F Soap Dish series cantabil cat No BA 25 make Prayag or equivalent

S&F bathroom mirror cabinate 500x400 make prayag cat no -556 or equivalent

S F in repairs Sinks made of stainless steel 1mm thick kitchen or laboratory with plugsm wasers and wastes including bedding in cement mortar on to drarf wall or including ficing cantilever brackets and connecting union to pipe overall size 495 mmx420mm boel size 410mmx330mmx160mm all as specifie and directed. for servant Qtr

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for removing excavated material (soils), exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 200mm) complete all as specified and as directed by the Engineer-in-Charge.

M & L for reinforced concrete pipes, class NP2, 200 mm dia, laid and jointed complete with collars in trenches and jointed as specified complete all as specified and as directed by the Engineer-in-Charge

M & L for concrete bed to drain pipes of 200 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested cement concrete 1:4:8 type D-2 complete all as specified and as directed by the Engineer-in-Charge

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20/15 mm graded stone aggregates) in precast manhole covers

S&F in aluminium die cast body Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Surface excavation n.exc 30cm deep & averaging 15cm deep & getting out in hard/dense soil.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft or loose soil.

M & L Cement concrete in foundation filling and mass concrete 1:2:4 Type B2 (40mm graded aggregate).

M&L providing Cement concrete type D2 (1:4:8) in foundations,filling and mass concrete

M & L pre-cast cement concrete block Type C1 ,1:3:6(20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in mortar (1:6) completed as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in sub base all as specified and directed

S&F Concrete interlocking paver block 80 mm thick rubber moulded of reqd size laid dry over &incl 50mm thick sand cushing in layers as specified.

M&L 5 mm thick Sand filling under floors or in foundations including watering and consolidation

Providing, cement concrete Type B1 (1:2:4) in roof kerbs or mud stops, rounded or chamfered on edges

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces complete all as directed by Engr-In-Charge..

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash on walls

S & F Structural steel/ tubular /box section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 .St.240 conforming to Fe 410-0 or Fe 310-0 (60x60x3mm) & (40x40x3 mm)

M & L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and colour having tensile strength of 50 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F 18 mm thick prelaminated PVC Celuka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plastiwood or equivalent

All as per Above item but 18 mm thick plain cheluka plywood

S&F Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F Kitchen basket stainless steel for Cutlery basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F Kitchen basket stainless steel for Plain basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F Kitchen basket stainless steel for Dish (plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters

S&F Handle fabricated type polished of Size 100 mm

S&F Medium grade stainless steel butt hinges ISI marked of size 75 mm

S&F Table top Wash hand basin decorative pattern including bottle trap and all necessary fittings.make Jaquar cat No LYS-WHT-0555 or equivalent

S&F in Towel Rack fancy type .Make : Prayag CAT No SS-1 or equivalent

S&F in handshower with 1.5 mtr flexible tube and wall hook make Prayag Cat No BHS 87 or equivalent

Dismantling fencing wire mesh, any type

Dismantling posts or struts (wood, steel or R.C.C.) anysection, including taking out embedded portion in concrete brick masonary and making good disturbed ground

Excavating in post holes (or similar holes) each n. exc. 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc. 50m and making good surface ,hard and dense soil all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil

M&L Cement concrete 1:4:8 type D2 in foundations,filling and mass concrete

M & L for pre cast cement concerete block masonary with solid block exe 10 cm width and setteing in cement mortor 1:4 with type C1 1:3:6 (20 MM graded aggregate).

M & L for Coping concrete using 1:2:4 of type B1 using 20 mm aggregate all as specified and directed.

M&L 10mm thick cement plastering on brick or concrete surfaces in CM 1:4 including finished surfaces even & smooth without using extra cement all as directed by Engr-in-Charge.

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash all as specified and directed.

M/L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in foundation filling and mass concrete ll complete as directed by Engr-in-Charge.

S & F Structural steel/ tubular /box section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 .St.240 conforming to Fe 410-0 or Fe 310-

Supply only for chain link fencing made out of 4mm dia galvanised iron wire of mess 75mmx75mm size, made upto into mattress or cage, straining and fixing all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails straining bolts etc including provision of binding wires.

M & L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome.

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick Hylam sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following :

One light/ Fan point controlled by one way switch.

One light point controlled by two way switch.

One Bell point controlled by one switch bell push

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-169.00 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F switch piano flush type single pole one way 5 Amps 230 V.

S&F switch piano flush type two way 5 Amps 230 V.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose,

S& Fixing Switch socket combination 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and three pin 5 Amps ) .

S&F socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type. .

S&F fan regulator Electronic Step type (min 5 steps) 2module, 120W ISI marked complete all as specified and directed

S & F switch Bell Push botton type 5 Amps single pole one way.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), without mild steel/pressed steel sunken boxes; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following : Note: Modular flush boxes & cover plate with frame will be measured and paid under respective item.

One light/ Fan point controlled by one way switch.

One Bell point controlled by one switch bell push

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-178.00 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F modular switch piano flush type single pole one way 6 Amps,1 module

S&F moduler socket 6/10 Amps -2/3 pin combined 2 module,

S&F modular switch piano flush type single pole one way 16 Amps,1 module

S&F Modular socket combination 16/20 Amps 2/3 Pin combined 2 module

S & F Modular switch Bell Push 6/10 Amps single pole one way.

S&F Bell Ding Dong AC 230 volts type single pole as directed,

S&F modular fan regulator Step type 120W 2module complete all as specified and directed.

S&F Modular white cover plate with frame 8 module

S&F Modular Metal flush box , 8 module

S&F Modular white cover plate with frame 6 module

S&F Modular Metal flush box , 6 module

S&F Modular white cover plate with frame 4 module

S&F Modular Metal flush box , 4 module

S&F Modular white cover plate with frame 3 module

S&F Modular Metal flush box , 3 module

S&F Modular white cover plate with frame 2 module

S&F Modular Metal flush box , 2 module

S&F Modular white cover plate with frame 1 module

S&F Modular Metal flush box , 1 module

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified.

S&F lamp holder insulated body with back plate for battern fittings.Make: Bajaj/CG/Havells.

Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1900 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 20W , D562065 of Wipro or Equivalent model in Philips/Osram.

Supply& Fixing LED Batten fittings 2ft 10 Watt (min 800lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Make:.Wipro Garnet D561065 or equavalent in Osram/Philips

Supply& Fixing LED Batten fittings 1ft 5 Watt (min 380 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Make:.Wipro Garnet D560565 or equivalent in Osram/Philips

Supply & Fixing LED Retrofit lamp 7 Watt white 6500K cool day light Minimum lumens 600 in angle holder complete. Make:.Wipro tejas or equivalent in CG//Philips

S&F DB sheet metal enclosure 4 way TPN 415 volts double door for mounting MCBs.

S&F DB sheet metal enclosure 8 way SPN for mounting MCB double door.

S&F MCB SPN 32 Amps B series all as specified and rupturing capacity 10 KA,

Supply and Fix MCB TPN 63 Amps B series 415 Volts rupturing capacity 10KA.

S&F MCB single pole 5 to 32 Amps B series all as specified and rupturing capacity 10 KA,

M&L for sub main wiring with two runs of 4.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed, concealed in wall etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.

M&L for sub main wiring with two runs of 6.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed concealed in wall etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.

Supply and fix Metal body exhaust fan 225 mm sweep AC, 240 volts consist of Double ball bearing & Louvers metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including making sutable size circular hole in brick / PCC block / stone masonary wall built in cement mortar and making good finishing and painting as existing colour to disturbed surface complete all as specified & directed by Engr in charge. Make :Crompton greaves Trans air / Havells ventilair DB / Bajaj Freshee MKII or eqvt in Orient.

Taking down & Refixing Exhaust fan 225mm sweep AC, 240 volts,Metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge. Note:Bldg no.P-197,P-202,P-203,P-205,P-210 & P-350

Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge

Taking down & refixing of water heater geyser 25 Ltr capacity Glass lined metal body Bajaj New shakti Geyser,vertical type with complete accessories in same location after completion of repair of bldg

Supply & Installation of Electric water heater geyser storage type 25 Ltr capacity BEE 5star rated as specified and directed by engr in charge. Make: CG/Racold/Jaguar/Bajaj

M&Lfor Earthing complete with GI plate 600x600x6.0mm thick electrode buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI wire 4mm dia (8 SWG) as eathing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 15mm bore all as shown on electrical plate No 5 of SSR Part-I including excavation and earth work &connected to earth test point electrode,including PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia etc and testing on completion complete all as specified and as directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 15 mm dia and wire mesh complete. PCC pit shall be prepared as per design mentioned in SSR Part I 2009 electrical Plate No 3 Note No 2 :The rate of earthing GI wire and GI protection pipe upto 7.5 m quote in the rate.

Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W.Make:LSTS-30-CDL of CG and euivalent in other make.

S& F security light bracket made out of GI pipe 40mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts Bolts and two coats of alluminium paint over a coat of red oxide primer all as directed.

Taking down existing energy meter from site and deposit to MES storeyard and refixing the same meter after completion of work all as specified and directed.

S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP 'C' series of 240 volts.

S&F louvers metal body suitable for 225mm metal body exhaust fan as directed by Engr in charge.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for trenches of pipe line in soft/loose soil all as specified and directed.

Returning, filling in , including spreading, leveling, watering and well ramming in layers not exc 25cms

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 meter above the starting point

Taking up/down GI tubing and connections 50/40mm size of pipes including all fittings all as specified

Taking up/down GI tubing and connections 25mm size of pipes including all fittings all as specified

Taking up/down GI tubing and connections 20mm size of pipes including all fittings all as specified

S&F tube GI medium grade 50mm dia with all fittings laid in trenches all as specified and directed

S&F tube GI medium grade 40mm dia with all fittings laid in trenches all as specified and directed

S&F tube GI medium grade 25mm dia with all fittings laid in trenches all as specified and directed

S&F tube GI medium grade 20mm dia with all fittings laid in trenches all as specified and directed

S&F stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union of size 50 mm all as specified and directed by engr in charge

S&F stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union of size 40 mm all as specified and directed by engr in charge

S&F stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union of size 25 mm all as specified and directed by engr in charge

S&F stop valve cast copper alloy screw down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union of size 20 mm all as specified and directed by engr in charge

Supply & Laying cable of 25 Sqmm x 4 core, only in trenches / poles / walls XLPE insulated, armoured, Heavy duty electric power cable with aluminium conductor 1100 volts grade for following size with lugs including taking out old unserviceable cable complete all as specified and directed by Engineer-in-Charge.

M&L dry river sand in trenches for cable cushioning & protection including spreading, ramming all as specified and directed.

Supply & Laying precast PVC cable concrete cable cover LV voltage type -I flat size 250 mm x 150 mm x 40 mm complete

S&F GI Pipe light grade 40 mm for road crossing/ on pole/ on wall for protection of LT Cable laid in trenches, fixed to wall/pole including MS clamps etc. as directed by Engr-in-Charge

M/s SK Traders

Vraj and Vaj Construction

M/S S. SINGH TRADERS

S t modi

JAMNAGAR ELECTRIC AND MACHINERY CO

vijay infraprojects pvt ltd