Laying of Balance RWRM from new intake well site at Hiradharabati with provision of Distribution pipes in accordance with (SWAP III) projects for Kodala water supply Scheme under state plan-2025-26 (SUJAL)

Laying of RWRM from Intakewell to Bhautasarsing Supplying of all labour,T&P for Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately as per direction of Engineer in charge.

Supplying of all labour,T&P for Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying of all labour,T&P for Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.(i) In all kinds of soil

In hard rock granite

Supplying all materials, labour, T&P for providing and fixing close barricating for trenches and structure for safely purpose as per direction of Engineer - in- Charge. ( Both side of the trenches will be taken as one side for the purpose of measurement and payment i.e length of trench.)

Supplying of all labour,T&P for Laying in trenches CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE, SOCKET & SPIGOT PIPES, CLASS - K9 WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge (Earth work in trenches jointing of pipes specials and fitting to be meausred separately)( labour charge ocnly) (a) 450mm dia D.I. K9 pipe line

Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket] (i) 450mm dia D.I. K9 pipe line

Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)

Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK (i) 450mm dia D/F Sluice Valve (PN1.6)

450mm dia NR Valve standard (PN1.6)

Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve. (VAG /Talis Make) (i) 25mm dia Tamper proof single Air Valve

50mm dia Tamper proof single Air Valve

80mm dia Tamper proof Double Air Valve

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge. (i) 450mm dia MJ Socket

450mm dia MJ Collar

Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. (i) S.V. chamber internal size:-[1.0x1.40x1.55mtr] for 450dia. S/V.

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge.

Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.

Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.

Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.

Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of Engineer - in - charge.

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. (i) 450 mm dia M.S. pipe 6.3mm thick

450 mm dia M.S. Flange 16mm thick

450mm. Dia. X 90° MS bend plain

450mm. Dia. X 90° MS bend flanged

450mm. Dia.MS offset bend flanged

Supplying all labour and T&P for Flame cutting of following dia MS pipe of following thick in trenches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for Fillet welding at site etc all complete

Construction of Thrust Block with RCC M-20 for 450mm. Dia D.I. pipe (i) size 1.00 x 1.00 x 1.00 m.

Supplying all materials , labour and T&P for laying of double chambered restrained joint socket Bend of the following nominal dia. confirming to IS specifiations including testing as per the direction of Engineer - in - charge (i) 450mm. X 45°

Supplying all materials , labour and T&P for laying of restrained joint DI pipes of the following nominal dia. confirming to IS specifiations including testing as per the direction of Engineer - in - charge (i) 450mm. dia.

Supplying all labour, T&P for providing flanged joints to pipes including testing the joints etc. all complete as per PH specification and direction of Engineer-in-charge (i) 450 mm dia flange joint.

Causeway , Canal and Bridge crossing arrangements for RWRM Construction of RCC supporting Pillar for 450mm. dia. Pipe for culvert crossing Supplying all labour and T&P for earth work in excavation of foundation trenches in all kinds of soil within initial lead and lift including rough dressing and leveling the bed etc. all complete as per specification and direction of Engineer - in - charge

Supplying allmaterials , labour and T&P for filling sand in F & P watered and rammed etc. all complete as per specification and direction of Engineer - in - charge

Supplying allmaterials , labour and T&P for providing CC ( 1:3:6 ) with 4cm size HG metal in F & P etc. all complete as per specification and direction of Engineer - in - charge

Supplying allmaterials , labour and T&P for providing R.C.C. ( M-20 ) with 20mm and downgrade size hard granite chips (CB) including hoisting and laying as per specification and direction of Engineer - in - charge

Supplying all labour and T&P for cutting , bending , binding and tying ms rods and placing the grills in position including cost of steel and binding wire etc. all complete as per specification and direction of Engineer - in - charge

Supplying all labour and T&P for Rigid and smooth centering and shuttering for RCC works including false etc. all complete as per specification and direction of Engineer - in - charge (i) Raft

Column wall

Top of column

Supplying all labour and T&P for 12mm. Thick cement plaster ( 1 ; 4 ) including punning etc. all complete as per specification and direction of Engineer - in - charge

Laying of Balance CWRM for Zone -III and Distribution pipes , Kodala Supplying all labour , T & P for dismantling 80mm thick interlock concrete colour paver block for laying of pipeline and stacking them for reuse after laying of pipeline as per specification and direction of Engineer-in-charge

Supplying of all labour,T&P for Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Supplying of all labour,T&P for Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.(i) In all kinds of soil

In hard rock granite

Supplying all materials, labour, T&P for providing and fixing close barricating for trenches and structure for safely purpose as per direction of Engineer - in- Charge. ( Both side of the trenches will be taken as one side for the purpose of measurement and payment i.e length of trench.)

Laying in trenches CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE, SOCKET & SPIGOT PIPES, CLASS - K7 & K9 WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge (Earth work in trenches jointing of pipes specials and fitting to be meausred separately) (i) Labour charges only (i) 250mm dia pipe

200mm dia pipe

150mm dia pipe

100mm dia pipe

Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket] (i) For 250mm dia DI ( K- 7 )Pipe line

For 200mm dia DI ( K- 7 )Pipe line

For 150mm dia DI ( K- 7 )Pipe line

For 100mm dia DI ( K- 7 )Pipe line

Supplying of all labour,T&P and materials for Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)

Supplying of all labour,T&P and materials for Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK (i) 250mm dia D/F Sluice Valve (PN1.6)

200mm dia D/F Sluice Valve (PN1.6)

150mm dia D/F Sluice Valve (PN1.6)

100mm dia D/F Sluice Valve (PN1.6)

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge. (i)250mm dia MJ Socket

200mm dia MJ Socket

150mm dia MJ Socket

100mm dia MJ Socket

250mm dia MJ Collar

200mm dia MJ Collar

150mm dia MJ Collar

100mm dia MJ Collar

Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve. (VAG /Talis Make) (i) 25mm dia Tamper proof single Air Valve

50mm dia Tamper proof single Air Valve

Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. (i) S.V. chamber internal size:-[0.75x0.75x1.485mtr] for 200mm. to 300mm .dia. S/V.

S.V. chamber internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S/V.

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge.

Supplying of all labour,T&P and materials for Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.

Supplying of all labour,T&P and materials for Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. (i) Labour charge only

20% of quantity including cost of Paver

Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge.

Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.

Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of Engineer - in - charge.

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. (i) 250 mm dia M.S. pipe 5mm thick

200 mm dia M.S. pipe 4.5mm thick

150 mm dia M.S. pipe 4.5mm thick

100 mm dia M.S. pipe 4.5mm thick

250 mm dia M.S. Flange 12mm thick

200 mm dia M.S. Flange 12mm thick

150 mm dia M.S. Flange 12mm thick

100 mm dia M.S. Flange 12mm thick

250mm. X 90° MS bend plain

250mm. X 90° MS bend flanged

250mm. Dia.MS offset bend plain

250mm. Dia.MS offset bend flanged

200mm. X 90° MS bend plain

200mm. X 90° MS bend flanged

200mm. Dia.MS offset bend plain

200mm. Dia.MS offset bend flanged

150mm. X 90° MS bend plain

150mm. X 90° MS bend flanged

150mm. Dia.MS offset bend plain

150mm. Dia.MS offset bend flanged

100mm. X 90° MS bend plain

100mm. X 90° MS bend flanged

100mm. Dia.MS offset bend plain

100mm. Dia.MS offset bend flanged

Supplying all labour and T&P for Flame cutting of following dia MS pipe of following thick in trenches by gas cutter set of pocket etc all complete as per direction of Engineer in charge.

Supplying all labour and T&P for Fillet welding at site etc all complete as per direction of Engineer in charge.

Supplying of all labour,T&P and materials for Construction of Thrust Block with RCC M-20 as per drawing and specification and direction of Engineer in charge. (a) for 200mm & 250mm (i) size 0.75 x 0.75 x 0.75

(a) for 150mm & 100mm size 0.75 x 0.75 x 0.75

Supplying all labour, T&P for providing flanged joints to pipes including testing the joints etc. all complete as per PH specification and direction of Engineer-in-charge as per direction of Engineer in charge. (i) 250 mm dia M.S flange joint

200 mm dia M.S flange joint

150 mm dia M.S flange joint

100 mm dia M.S flange joint

Please Enable Macros to View BoQ information