Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | ₹47.9 L Quoted ₹50.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹53.1 L+₹2.7 L (5.25%)Rejected-Finance | ₹53.1 L+₹2.7 L (5.25%) | L2 | Rejected-Finance L2 |
| 3 | L3₹53.7 L+₹3.2 L (6.40%)Rejected-Finance | ₹53.7 L+₹3.2 L (6.40%) | L3 | Rejected-Finance L3 |
| 4 | L4₹54.8 L+₹4.3 L (8.49%)Rejected-Finance | ₹54.8 L+₹4.3 L (8.49%) | L4 | Rejected-Finance L4 |
| 5 | L5₹56.3 L+₹5.8 L (11.5%)Rejected-Finance | ₹56.3 L+₹5.8 L (11.5%) | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | KASHMIR FAIR DEAL SERVICES L7 | M/S M/S MOHD AMIN MUNTAZIR L4 | M/S RW INFRA L6 | M/S SHABIR HUSSAIN L7 | M/S O PAL ENGINEERS & CONSTRUCTION COMPANY L1 | M/S Ghulam Mustafa L2 | M/S MOHD HUSSAIN L5 | M/S AZAD CONSTRUCTION L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed. | 305 | Sqm | 50 ₹15,250 | 40 ₹12,200 | 45 ₹13,725 | 50 ₹15,250 | 25 ₹7,625 Lowest | 35 ₹10,675 | 40 ₹12,200 | 35 ₹10,675 |
| 2.00 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 305 | Sqm | 1,160 ₹3,53,800 | 1,000 ₹3,05,000 | 1,130 ₹3,44,650 | 1,160 ₹3,53,800 | 950 ₹2,89,750 Lowest | 990 ₹3,01,950 | 1,100 ₹3,35,500 | 1,000 ₹3,05,000 |
| 3.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. | 18.9 | Cum | 1,800 ₹34,020 | 1,550 ₹29,295 | 1,750 ₹33,075 | 1,800 ₹34,020 | 1,500 ₹28,350 Lowest | 1,530 ₹28,917 | 1,700 ₹32,130 | 1,600 ₹30,240 |
| 4.00 | M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base to floor or for laying of floor finishes or similar works complete all as specified and directed. | 109 | Sqm | 790 ₹86,110 | 720 ₹78,480 | 750 ₹81,750 | 790 ₹86,110 | 650 ₹70,850 Lowest | 680 ₹74,120 | 730 ₹79,570 | 690 ₹75,210 |
| 5.00 | M&L coloured chequered cement concrete tiles of size 300mm x 300mm x 20 mm, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors thick laid over and including 20 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry complete all as specified and directed. | 109 | Sqm | 1,880 ₹2,04,920 | 1,800 ₹1,96,200 | 1,850 ₹2,01,650 | 1,880 ₹2,04,920 | 1,750 ₹1,90,750 Lowest | 1,780 ₹1,94,020 | 1,830 ₹1,99,470 | 1,790 ₹1,95,110 |
| 6.00 | Racking out of sealing compound from existing joints of dimensions forming contraction/dummy/construction joints 15 to 25 mm wide including cleaning of edges and joint with brush and finally fanning with compressed air to make joints free from all loose material complete all as specified. The deteriorated edges of concrete joints shall be made good to true line with provisions of polymer concrete.Top 10 mm (minimum above back up rod), filled with polysulphide or polyurethane sealant and priming the sides with primer provision of closed cell polyethelene back up rod of suitable dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surface and to give a neat finishing to the sealant and removing the masking tape after sealant is applied complete all as specified and as directed by Engineer-in-charge. Make M/s Choksey Chemicals Pvt Ltd/FOSROC INDIA/ M/s Bostic India Pvt Ltd. | 60 | RM | 620 ₹37,200 | 550 ₹33,000 | 590 ₹35,400 | 620 ₹37,200 | 490 ₹29,400 Lowest | 520 ₹31,200 | 560 ₹33,600 | 530 ₹31,800 |
| 7.00 | M&L for surface cleaning by mopping scrubbing, surface abrasion, removal of dust by vaccum cleaner complete all as specified and directed by Engineer-in-charge | 270 | SQM | 280 ₹75,600 | 200 ₹54,000 | 250 ₹67,500 | 280 ₹75,600 | 155 ₹41,850 Lowest | 180 ₹48,600 | 200 ₹54,000 | 170 ₹45,900 |
| 8.00 | M&L for priming a coat of mix of resin & handner (in 2:1 ratio by volume) of thickness not less than 200 micron @ 5 Sqm/Ltr (below Screeding for epoxy Coating) which penetrate into concrete to form a adhesive bond using stiff crush or roller complete all as per manufacturers instructions and directed by engineer -in-charge | 270 | SQM | 1,170 ₹3,15,900 | 1,050 ₹2,83,500 | 1,150 ₹3,10,500 | 1,170 ₹3,15,900 | 990 ₹2,67,300 Lowest | 1,020 ₹2,75,400 | 1,100 ₹2,97,000 | 1,040 ₹2,80,800 |
| 9.00 | M&L for 4 mm thick screeding by milled trowelled system with mortar of material specially treated aggregate in resin matrix For maximum strength protection complete all as per manufacturer's instructions and directed by Engineer-in-charge | 270 | SQM | 1,170 ₹3,15,900 | 1,100 ₹2,97,000 | 1,150 ₹3,10,500 | 1,170 ₹3,15,900 | 1,020 ₹2,75,400 Lowest | 1,050 ₹2,83,500 | 1,100 ₹2,97,000 | 1,050 ₹2,83,500 |
| 10.00 | M&L for 0.8 mm thick chemical resistant coloured pure epoxy self levelling topping low viscous, free flowing composition applied by trowel or sqeege,decorated by spike roller to dislodge air bubbles complete all as per manufacturer's instructions and directed by Engineer-in-charge | 270 | SQM | 1,380 ₹3,72,600 | 1,250 ₹3,37,500 | 1,350 ₹3,64,500 | 1,380 ₹3,72,600 | 1,180 ₹3,18,600 Lowest | 1,200 ₹3,24,000 | 1,300 ₹3,51,000 | 1,250 ₹3,37,500 |
Tender Value
Refer Docs
EMD Value
₹95,100
Closing Date
29 May 2026, 6:00 pmClosed
GE Khumbathang
Khumbathang
GE/KHU-31/2026-27 SPL REPAIR TO BLDG NO T-115 IN THE AOR OF AGE B/R-II UNDER GE KHUMBATHANG
2026_MES_759484_2
GE/KHU-31/2026-27
Open Tender
Support/Maintenance Service
Item Wise
180 days
GE Khumbathang
As per tender documetns
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹95,100
28 Jul 2026
16 May 2026
30 May 2026
16 May 2026
29 May 2026
23 May 2026
16 May 2026 - 22 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed. | 305 | Sqm | - | - |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | - | Sqm | - | - |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. | - | Cum | - | - |
| 4 | M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base to floor or for laying of floor finishes or similar works complete all as specified and directed. | 109 | Sqm | - | - |
| 5 | M&L coloured chequered cement concrete tiles of size 300mm x 300mm x 20 mm, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors thick laid over and including 20 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry complete all as specified and directed. | - | Sqm | - | - |
| 6 | Racking out of sealing compound from existing joints of dimensions forming contraction/dummy/construction joints 15 to 25 mm wide including cleaning of edges and joint with brush and finally fanning with compressed air to make joints free from all loose material complete all as specified. The deteriorated edges of concrete joints shall be made good to true line with provisions of polymer concrete.Top 10 mm (minimum above back up rod), filled with polysulphide or polyurethane sealant and priming the sides with primer provision of closed cell polyethelene back up rod of suitable dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surface and to give a neat finishing to the sealant and removing the masking tape after sealant is applied complete all as specified and as directed by Engineer-in-charge. Make M/s Choksey Chemicals Pvt Ltd/FOSROC INDIA/ M/s Bostic India Pvt Ltd. | 60 | RM | - | - |
| 7 | M&L for surface cleaning by mopping scrubbing, surface abrasion, removal of dust by vaccum cleaner complete all as specified and directed by Engineer-in-charge | 270 | SQM | - | - |
| 8 | M&L for priming a coat of mix of resin & handner (in 2:1 ratio by volume) of thickness not less than 200 micron @ 5 Sqm/Ltr (below Screeding for epoxy Coating) which penetrate into concrete to form a adhesive bond using stiff crush or roller complete all as per manufacturers instructions and directed by engineer -in-charge | 270 | SQM | - | - |
| 9 | M&L for 4 mm thick screeding by milled trowelled system with mortar of material specially treated aggregate in resin matrix For maximum strength protection complete all as per manufacturer's instructions and directed by Engineer-in-charge | 270 | SQM | - | - |
| 10 | M&L for 0.8 mm thick chemical resistant coloured pure epoxy self levelling topping low viscous, free flowing composition applied by trowel or sqeege,decorated by spike roller to dislodge air bubbles complete all as per manufacturer's instructions and directed by Engineer-in-charge | 270 | SQM | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
tenderr31.pdf
Tender Documents • 1.61 MB
BOQ_857770.xls
BOQ • 1.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .