Repairing and Renovation and Maintenance works at ICU 1,2,3 and 4 of 10Th floor new hospital building in L.g.hospital campus.(re invite)

Name of Work:- Repairing/Renovation and Maintenance works at ICU-1,2,3 and 4 of 10Th floor new

hospital building in L.g.hospital campus. (re-invite)

AHMEDABAD MUNICIPAL CORPORATION

AMC MET/HOSPITAL

Name Of Work :- Repairing/Renovation and Maintenance works at ICU-1,2,3 and 4 of 10Th floor new

hospital building in L.g.hospital campus. (re-invite)

Items Rate Amount

S.R.NO. Qty Per

Excavation for foundation upto

m depth including sorting out and

stacking of useful materials and

1 30.00 disposing off the excavated stuff upto 50 cu.m 115.92

Meter lead.(A) Loose or soft soil.( iteam

code 04001A ,S.O.R Ahemdabad City 2023-

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard

soil.( iteam code 04001B ,S.O.R Ahemdabad

Excavation for foundation for depth from

m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

3 15.00 excavated stuff upto 50 Meter lead.(A) Loose cu.m 128.52

or soft soil.( iteam code 04002A ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing off

4 15.00 the excavated stuff upto 50 Meter lead.(B) cu.m 160.77

Dense or Hard soil.( iteam code 04002B

,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from

3.0 m to 5.0 m including sorting out and

stacking of useful materials and

5 15.00 disposing off the excavated stuff upto cu.m 141.11

50 Meter lead.(A) Loose or soft soil.(

iteam code04003A,S.O.R Ahemdabad City

Excavation for foundation for depth from

3.0 m to 5.0 m including sorting out and

stacking of useful materials and disposing off

the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil.( iteam code04003B,S.O.R

Ahemdabad City 2023-24)

Filling available excavated earth

(excluding rock) in trenches. plinth,

sides of foundations etc. in layers not

7 30.00 exceeding 20 cm. in depth consolidating cu.m 129.10

each disposited layer by ramming and

watering.( iteam code 4006,4.12,S.O.R

Ahemdabad City 2023-24)

Filling in plinth with sand under floors

including watering ramming, consolidating

8 30.00 and dressing complete.(iteam code cu.m 455.63

4007A,4.24,S.O.R Ahemdabad City 2023-24)

Filling in foundation and plinth with

murrum or selected soil in layers of 20cm.

thickness including watering, ramming and

9 25.00 consolidating etc. complete.(iteam code cu.m 286.20

04008A,S.O.R Ahemdabad City 2023-24)

Filling in foundation and plinth with brick

Bats Chhara in layers of 20cm. thickness

10 5.00 including watering, remming and cu.m 594.61

consolidating etc. complete. (iteam code

04009A,S.O.R Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

directed within a lead of 50 Meter for

following diameter of pipes.(i)200

mm.(iteam code 04010A, 4.27,S.O.R

Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

12 1.00 directed within a lead of 50 Meter for Each 1290.97

following diameter of pipes.(ii)

mm.(iteam code 04010B , 4.27,S.O.R

Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for

cast in situ piles) and getting out the soil and

disposal of the surplus excavated soil as

13 1.00 directed within a lead of 50 Meter for Each 1509.00

following diameter of pipes.(iii) 300 mm

(iteam code 04010C , 4.27,S.O.R Ahemdabad

Extra for under reaming inside the bore

Holes for under reamed piles of following

14 1.00 Diameter.(i) 200 mm(iteam code 04011BA, Each 430.32

4.28,S.O.R Ahemdabad City 2023-24)

Extra for under reaming inside the bore

Holes for under reamed piles of following

Diameter.(ii) 250 mm(iteam code 04011B

15 1.00 4.28,S.O.R Ahemdabad City 2023-24) Each 516.39

Extra for under reaming inside the bore

Holes for under reamed piles of following

Diameter.(iii) 300 mm (iteam code 04011C,

16 1.00 4.28,S.O.R Ahemdabad City 2023-24) Each 642.30

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft

17 3.00 soil. (EXECUTED WITH MANUAL cu.m 201.81

LABOUR)(iteam code 04B001A ,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard

18 3.00 soil. (EXECUTED WITH MANUAL cu.m 259.14

LABOUR)(iteam code 04B001B,S.O.R

Ahemdabad City 2023-24)

Providing and laying cement concrete 1:3:6

(1- Cement : 3- coarse sand : 6- hand broken

stone aggregates 40 mmnominal size) and

19 1.00 curing complete excluding cost of formwork cu.m 2976.00

in (A) Foundation and Plinth (iteam code

05003A,5.3.2 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete 1:4:8

(1- Cement : 4- coarse sand : 8- hand broken

stone and curing complete excluding cost of

20 1.50 formwork in (A) Foundation and Plinth cu.m 2653.67

(iteam code 05004A,5.3.3 ,S.O.R Ahemdabad

Providing and laying cement concrete 1:3:6

(1- Cement : 3- Coarse sand : 6- crushed

stone aggregates 20 mm nominal size) and

21 1.50 curing complete including cost of formwork cu.m 4006.15

in (A) Wall Caps / Coping (iteam code

05005A,5.3.14 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete

1:5:10 (1- Cement : 5- Coarse sand : 10-

hand broken stone aggregates 40 mm

nominal size) and curing complete

22 1.00 excluding cost of formwork in cu.m 2492.51

(A)Foundation and Plinth (iteam code

05006A,5.3.4 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete

1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm

nominal size) and curing complete

excluding cost of formwork in (A)

Foundation and Plinth (iteam code

05010A,5.3.13 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete

1:2:4 (1- Cement : 2- Coarse sand : 4-

graded stone aggregates 20 mm

nominal size) and curing complete

excluding cost of formwork in

24 2.00 (B)Independent piers, columns, and cu.m 3661.30

pillars, upto floor two level (iteam code

05010BA,5.3.13 ,S.O.R Ahemdabad City

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

25 2.00 and reinforcement for reinforced concrete cu.m 3923.53

work in (A) Foundations, footings, Base or

columns and Mass concrete (iteam code

05011AA,5.4.1 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

and reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level. (iteam code 05011BA,5.4.1

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete work

1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

and reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts

upto floor two level. (iteam code

05011DA,5.4.1 ,S.O.R Ahemdabad City 2023-

Providing TMT Bar FE 415 reinforcement

for R.C.C. work including bending,

binding and placing in position complete

28 100.00 upto floor two level (iteam code kg 66.59

05014BA,5.4.11 ,S.O.R Ahemdabad City

Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

29 100.00 and placing in position complete upto floor kg 75.46

two level (iteam code 05014C,5.4.11 ,S.O.R

Ahemdabad City 2023-24)

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

30 2.00 work in (A) Foundations, footings, Base of cu.m 3977.88

columns and Mass concrete (iteam code

05024AA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

31 1.50 work in (B) Walls, from top of foundation cu.m 4484.17

level upto floor two level (iteam code

05024BA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

work in (C) Slabs ,landing, shelves,Balconies

32 1.50 Lintels, Beams, Girders and Cantilever cu.m 4460.36

upto floor two level. (iteam code

05024CA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

33 3.00 work in (D) Columns, Pillars posts and cu.m 4558.20

struts upto floor two level. (iteam code

05024DA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete

excluding the cost of formwork and

reinforcement for reinforced concrete

34 1.00 work in (E) Staircases excluding landing cu.m 5418.91

upto floor two level (iteam code

05024EA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

M.200 and curing complete excluding

the cost of formwork and

35 3.00 reinforcement for reinforced concrete cu.m 4701.97

work in (K) Vertical and Horizontial its

upto floor two level. (iteam code

05024KA,5.8.2 ,S.O.R Ahemdabad City 2023-

Brick work using common burnt clay building

bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

36 30.00 Cement : 5 -fine sand)(A) Modular (iteam cu.m 4345.02

code 06001AA,6.12 ,S.O.R Ahemdabad City

Extra for brick work in super structure above

plinth level upto floor two level (A) Modular

37 30.00 (iteam code 06006A,6.19,S.O.R Ahemdabad cu.m 262.35

Extra for brick work in super structure above

floor two level Item No. 1(6.12) (A) Modular Floor

38 30.00 (iteam code 06007A1A,6.2,S.O.R Ahemdabad per 42.66

City 2023-24) Cu.m

(i) Half brick masonry in common brunt clay

building bricks having crushing strengthnot

less than 35 Kg/Sq.Cm. in Cement mortar

1:4 (1 Cement:4-coarsesand) in

39 120.00 foundationandplinth Sq.m 584.68

(A) Modular (iteam code

06008A1A,6.3,S.O.R Ahemdabad City 2023-

Extra for half brick masonry in super

structure above plinth level upto floor two

40 120.00 level. (A) Modular(iteam code Sq.m 47.85

06010A,6.32,S.O.R Ahemdabad City 2023-24)

Half brick thick honey- comb brick

work with common burnt clay building

bricks having crushing strength not less

than 35 Kg/Sq.Cm. (ii) In Cement Mortar

41 40.00 1:5 ( 1- Cement : 5 - coarse sand)(iteam code Sqm 298.38

0612BA,6.55,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete

and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass

concrete.(iteam code 09001AA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete

and plain concrete work in. (B) Flat surfaces

43 18.00 such as soffits of supspened floors slabs Sqm 252.00

Landings and the like. (1) Floors etc. upto

200 mm in thickness.(iteam

code09001B1A,9.1,S.O.R Ahemdabad City

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. Height of propping and

centering below supporting floor to ceiling

not exceeding 4 M. and removal of the

same for in situ reinforced concrete

44 19.00 and plain concrete work in. (B) Flat surfaces Sqm 270.90

such as soffits of suspended floor roof slabs

Landings and the like. (2) Floors etc. above

200mm in thickness.(iteam code

09001B2A,9.1,S.O.R Ahemdabad City 2023-

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

45 10.00 concrete and plain concrete work in. (C) Sqm 229.95

Vertical surface such as walls (any

thickness) partitions and the like

including attached buttresses & string course

& the like.(iteam code 09001CA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

46 10.00 concrete and plain concrete work in. (G) Sqm 297.68

Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan.(iteam code

09001G1A,9.1,S.O.R Ahemdabad City 2023-

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

47 10.00 concrete and plain concrete work in. (G) Sqm 422.10

Columns PillarsPosts and struts. (2)Circular

or curved in Plan.(iteam code

09001G2A,9.1,S.O.R Ahemdabad City 2023-

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

48 10.00 concrete and plain concrete work in. (H) Sqm 192.15

(1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in

Depth.(iteam code 09001H1A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

49 10.00 of the same for in situ reinforced Sqm 259.88

concrete and plain concrete work in. (H)

(2) Sides and soffits of Beams Beam

Haunchings canti-levers Girders

Bressumers and Lintels exceeding 1M.in

Depth.(iteam code 09001H2A,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

concrete and plain concrete work in. (I)

Edges of slabs and Breaks in floors and

walls.(iteam code 09001IA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

concrete and plain concrete work in.

51 10.00 (K) Small surfaceassuch as cantiever Sqm 604.80

brackets and ends of steps caps and

basses to pilasters and Columns and the

like.(iteam code 09001KA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

52 10.00 concrete and plain concrete work in. (L) Sqm 155.78

Chullah Hoods, weather shades Chhajjas

Corbels etc. including edges.(iteam code

09001LA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

53 12.00 concrete and plain concrete work in. (M) Sqm 242.55

Staircase with sloping or stepped soffits

including risers and stringers excluding

landing.(iteam code 09001MA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber

planking so as to give a rough finish

including centering shuttering strutting

and propping etc. height of propping

and centering below supporting floor to

ceiling not exceeding 4 M. and removal

of the same for in situ reinforced

concrete and plain concrete work in. (Q)

Vertical fins and vertical sun

breakers.(iteam code 09001QA,9.1,S.O.R

Ahemdabad City 2023-24)

Extra for additional height of

propping and centering where the

height of propping and centering

exceeds 4 .O M between supporting floor to

ceiling including temporary brick or stone

55 15.00 pillars for supporting as required. (i)Height Sqm 386.48

more than 4.0 M.and upto 5.0 M.(iteam

code 09002AA,9.1,S.O.R Ahemdabad City

Providing and fixing 35 mm thick

shutters for Doors, windows and clear

story windows including anodised

alluminium butt hinges with necessary

56 4.00 screws. (A) Indian Teak Wood (ii) Fully Sqm 3211.96

Glazed.(iteam code 10004BA,10.12,S.O.R

Ahemdabad City 2023-24)

Providing and fixing in position

collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat

iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete

57 2.00 with bolts, nuts, locking arrangements, Smt. 5391.23

stoppers handles including applying a

priming coat of red lead paint.(iteam code

11003A,11.6,S.O.R Ahemdabad City 2023-24)

Providing and laying 40mm thick

marble chips flooring rubbed and

polished (I.E. terrazo) to granolithic

finish with under layer 30mm thick

cement concrete 1:2:4 (1-Cement:2-coarse

sand :4- graded stone aggregate 10 mm

and down gauge) and top layer 10mm thick

with white, black or white and blak marble

58 1.00 cihps of required sizes from 1mm to 4mm Sqm 749.70

nominal size laid in cement marble powder

mix 3:1 (3-Cement : 1-Marble powder by

weight) in proportion of 4:7 (4-Cement

:7-marble chips by volume) (A) Dark

shade pigment with ordinary cement (In

top layer only)(iteam code

14001AA,14.2,S.O.R Ahemdabad City 2023-

Providing and laying Vitrified tiles 8 to

, 36'' x 36'' in flooring treads of steps

and landing laid on a bed of 12mm thick

59 15.00 cement mortar 1:3 (1- cement : 3-coarse Sqm 1469.91

sand ) finishing with flush pointing in

white cement.(iteam code

14008DA,14.29,S.O.R Ahemdabad City 2023-

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and

jointed with color cement slurry

including finised with flush pointing &

cleaning the surface etc. complete for

light shade(iteam code 14022A,S.O.R

Ahemdabad City 2023-24)

Providing and laying white glazed tiles 6mm

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3- coarse sand )

61 160.00 finishing with flush pointing in white Sqm 908.17

cement.(iteam code 14008AA,14.29,S.O.R

Ahemdabad City 2023-24)

Providing and laying white glazed tiles 6mm

thick in skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-

62 90.00 cement : 3-coarse sand) and jointed with Sqm 1044.23

white cement slurry(iteam code

14009AA,14.32,S.O.R Ahemdabad City 2023-

Providing and laying coloured glazed tiles of

the size 300 mm x 200 mm x 8 mm / 300 mm

x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster

63 100.00 1:3 (1 cement : 3 coarse sand) & jointed with Sqm 1426.95

white cement slurry.(iteam code 14036,S.O.R

Ahemdabad City 2023-24)

Providing and laying marble stone slab

flooring over 20mm (average)base of

cement mortar 1:6 (1- cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 -

64 2.00 coarse sand) laid and jointed with gray Sqm 2194.63

cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm

thick(iteam code 14011A,14.36,S.O.R

Ahemdabad City 2023-24)

Providing and laying polished Kota

stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed

65 60.00 with grey cement slurry mixed with pigment Sqm 982.83

to match the shade of slab including

rubbing and polishing etc. complete. (A)

25mm thick (iteam code

14012AA,14.43,S.O.R Ahemdabad City 2023-

Providing corrugated G.I. sheet of class-3

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I.

66 5.00 limpet washer. filled with white lead Sqm 719.93

complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick

sheet.(iteam code 15001A,15.1,S.O.R

Ahemdabad City 2023-24)

Providing valleys 900mm overall in plain

1.6mm thick G.I. sheet fixed with G.I. J or L

Hooks, Bolts and nuts glavanised iron J or

L Hooks Bolts and nuts 8mm dia G.I.

67 5.00 Limpet and bitumen washers Sqm 1042.78

complete.(iteam code 15003A,15.8,S.O.R

Ahemdabad City 2023-24)

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single

or half brick walls for interior plastering

upto floor two level and finished even

and smooth in (iii) Cement mortar 1:6 (1-

cement:6-sand)(iteam

code17002C,17.6,S.O.R Ahemdabad City

Providing 20mm thick cement plaster in

single coat on single or half brick walls

for interior plastering upto floor two level

and finished even and smooth in (iii) Cement

69 150.00 mortar 1:6 (1-cement:6-sand)(iteam code Sqm 165.38

17003C,17.61,S.O.R Ahemdabad City 2023-

White washing with lime on wall surface

(two coats) to give an even shade

including thoroughly booming the

70 100.00 surface to remove all dirt, dust; mortar Sqm 12.29

drops and other foreign matter.(iteam

code18001,18.11,S.O.R Ahemdabad City

Removing dry or oil bound distemper by a

washing and scraping and sand papering

the wall surface smooth including

71 2000.00 necessary repairs to scratches Sqm 11.19

complete.(iteam code18014,18.33,S.O.R

Ahemdabad City 2023-24)

Distempering with dry distemper of

approved brand and manufacture (two

coats) and of required shade on wall surfaces

of given an even shade, over and including

72 2000.00 a priming coat of whiting after Sqm 46.94

thoroughly brooming the surface free from

mortar dropping and other foreign

matter.(iteam code 18016,18.38,S.O.R

Ahemdabad City 2023-24)

Finishing wall with water proofing cement

paint of on wall surfaces (Two coats) to

give an approved brand and manufacture

and of required shape even shade after

thoroughly brushing the surface to remove

all dirt and remains of loose powered

materials.(iteam code 18027,18.51,S.O.R

Ahemdabad City 2023-24)

Extra over Item 73 for every subsequent

coat of water proofing cement paint of

74 200.00 approved brand and manufacture.(iteam Sqm 31.82

code 18028,18.53,S.O.R Ahemdabad City

Extra over item 73 for finishing with

cement paint on ceiling and sloping

75 200.00 roofs.(iteam code18029,18.54,S.O.R Sqm 6.47

Ahemdabad City 2023-24)

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface

to give an even shade including throughly

brushing the surface free from mortar

76 100.00 droppings and other foreign matter and Sq.m 78.44

sand papered smooth.(iteam code

18031,18.57,S.O.R Ahemdabad City 2023-24)

Extra over item 76 for every subsequent

coat of wall painting with plastic emulsion

pain of approved brand.(iteam code

18032,18.59,S.O.R Ahemdabad City 2023-24)

Extra over item 76 for painting

with plastic emulsion paint of approved

brand on ceilings andmsloping roofs.(iteam

78 500.00 code 18033,18.6,S.O.R Ahemdabad City Sqm 5.36

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

an even shade including cleanicn the

79 50.00 surface of all dirt, dust and other Sqm 86.94

foreign matter.(iteam code 19002,19.7,S.O.R

Ahemdabad City 2023-24)

Painting one coats (excluding priming

coat) on previously painted steel and

other metal surface with enamel paint,

80 150.00 brushing to give an even shade including Sqm 54.35

cleaning the surface of all dirt, dust and

other foreign matter.(iteam code

19003,19.11,S.O.R Ahemdabad City 2023-24)

Painting two coats (excluding priming coat)

on new wood and wood based surface

with ready mixed paint, brushing, oil,

gloss, semi gloss to give and even shade

81 50.00 including cleaning of all dust, dirt and other Sqm 104.12

foreign matter sand papering and

stopping.(iteam code 19014,19.77,S.O.R

Ahemdabad City 2023-24)

Varnishing two coats (excluding priming

coat) on new wood and wood based

surface under coating with flatting varnish

and finished coat with varnish to give an

even surface including cleaning the

82 300.00 surface of all dirt, dust and sand papering Sqm 54.18

so as to produce a smooth dry

surface.(iteam code 19015,19.84,S.O.R

Ahemdabad City 2023-24)

Extra over Above item 82 for every

subsequent coat of varnish.(iteam code

83 300.00 19016,19.86,S.O.R Ahemdabad City 2023-24) Sqm 30.68

Applying two coats of putty & two coats of

primer of approved brand and

manufacture on new wall surface to give

an even shade including thoroughly brushing

84 3000.00 the surface free from mortar dropping and sqm 40.19

other foreign matter and sand papered

smooth.(iteam code 19032,S.O.R

Ahemdabad City 2023-24)

Demolition and disposal of unserviceable

materials with all lead and lift.(i) Lime

85 5.00 concrete.(iteam code 20001B,20.1,S.O.R cu.m 603.23

Ahemdabad City 2023-24)

Demolition including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.

86 10.00 (i) R.C.C. work(iteam code 20002,20.3,S.O.R cu.m 1047.38

Ahemdabad City 2023-24)

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable

87 10.00 materials with all lead and lift. (i) In Lime cu.m 362.25

Mortar.(iteam code 20003A,20.11,S.O.R

Ahemdabad City 2023-24)

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable

88 80.00 materials with all lead and lift.(ii) In Cement cu.m 544.95

Mortar.(iteam code 20003B,20.11,S.O.R

Ahemdabad City 2023-24)

Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

materilas and disposal of unserviceable

89 600.00 materials with all lead and lift.(iteam code Sqm 47.25

20005,20.23,S.O.R Ahemdabad City 2023-24)

Dismentaling of wooden floors including

stacking of serviceable materilas and

disposal of unserviceable materials with all

90 15.00 lead and lift.(iteam code 20006,20.25,S.O.R Sqm 70.88

Ahemdabad City 2023-24)

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking

of serviceable materilas and disposal of

unserviceable materials with all lead and

91 101.00 lift.(i) G.I.sheet roofing.(iteam code Sqm 47.25

20007A,20.27,S.O.R Ahemdabad City 2023-

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking

of serviceable materilas and disposal of

unserviceable materials with all lead and

92 60.00 lift.(ii) A.C. sheet roofing.(iteam code Sqm 53.55

20007B,20.27,S.O.R Ahemdabad City 2023-

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking

93 100.00 them within all lead and lift.(i) Not Each 185.85

exceeding 3 Sq.M. in area.(iteam code

20013A,20.49,S.O.R Ahemdabad City 2023-

Dismentling C.I. pipes G.S.W.pipes abd

A.C. rain water pipes with fittings and

clamps including stacking the materials with

94 130.00 all lead and lift ( for any dia, of pipe)(iteam Rmt 74.03

code 20015,20.56,S.O.R Ahemdabad City

Dismantling santtary fittings like wash

basin . W.C. pan Indian and European

type, flushing tank etc. including stacking

95 60.00 the materials with all lead and lift.(iteam Each 401.63

code 20016,S.O.R Ahemdabad City 2023-24)

Dismentling barbed wire in fencing

including making rolls and also including

dismentling fencing posts including all earth

work concrete in base and making good

the disturbed ground stacking useful

materials as directed and disposing as

directed and disposing of the unserviceable

materials with all lead and lift.(iteam code

20014,20.51,S.O.R Ahemdabad City 2023-24)

Providing and fixing 1.20 Metre high

fencing with 2.0 Metre long M.S. Angle

posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting

Kg. per 100 Metre, strained and fixed

97 20.00 to posts with G.I,staples including fixing Rmt 385.40

the postsin ground with 0.5 M x 0.5.M x

0.5 M. block in C.C1:5:10 etc

complete.(iteam code 22001,22.2,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling

and floor galvanised Mild steel tubes

(Medium grade) of the following nominal

bore, tube fitting and clamps including

making good the wall ceiling and floor.(A)

15mm(iteam code 23001AA,23.2,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling

and floor galvanised Mild steel tubes

(Medium grade) of the following nominal

bore, tube fitting and clamps including

99 10.00 making good the wall ceiling and floor.(B) Rmt 297.25

20mm(iteam code 23001BA,23.2,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling

and floor galvanised Mild steel tubes

(Medium grade) of the following nominal

100 10.00 bore, tube fitting and clamps including Rmt 393.93

making good the wall ceiling and floor.(C)

25mm(iteam code 23001CA,23.2,S.O.R

Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

6.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(A) 20mm(iteam code

23004A,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

6.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

102 170.00 including making good the wall ceiling and Rmt 100.49

floor.(B) 25mm(iteam code

23004B,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

Dia. Low densidy, complete with special

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(C) 32mm(iteam code

23004C,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside

Dia. Low densidy, complete with special

falnge compression type fittings, wall

clipsetc. including making good the wall

ceiling and floor.(F) 75mm(iteam code

23004F,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside

Dia. Low densidy, complete with special

falnge compression type fittings, wall

105 200.00 clipsetc. including making good the wall Rmt 332.91

ceiling and floor.(G)110 mm(iteam code

23004G,23.8,S.O.R Ahemdabad City 2023-

Providing and fixing cast iron spigot and

waste and ventilating pipes of the

106 5.00 following nominal size.(B) 75mm dia.(iteam Rmt 732.09

code 23005BA,23.79,S.O.R Ahemdabad City

Providing and fixing cast iron spigot and

socket soil, waste and ventilating pipes

of the following nominal size.(C) 100mm

107 5.00 dia.(iteam code 23005CA,23.79,S.O.R Rmt 881.64

Ahemdabad City 2023-24)

Providing and fixing in position cowel

went to pipes.(B) 75mm dia.(iteam code

108 10.00 23006B,S.O.R Ahemdabad City 2023-24) Each 385.88

Providing and fixing in position cowel

went to pipes.(C) 100mm dia(iteam code

109 10.00 23006C,S.O.R Ahemdabad City 2023-24) Each 496.90

Providing and fixing cast iron (Spun)

Nahni trap of the following nominal

diameter of self cleaning design with C.I.

screaed down or higned grating including

cost of cutting and making good the walls

110 10.00 and floor 100mm inlet and 50mm outlet.(C) Each 600.08

100mm dia.(iteam code 23008,23.857,S.O.R

Ahemdabad City 2023-24)

Providing and fixing water closet

squatting Pan (Indian type W.C. Pan) size

580mm (Earthwork, bed concrete, foot

reste and trap to be measured and paid

111 10.00 for separately) (A) Vitreous China.(I) Each 926.10

Long pattern = White colour(iteam code

23009,23.111,S.O.R Ahemdabad City 2023-

Providing and fixing wsh down water

closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be

112 30.00 measured and paid for separately)(A) Each 1290.80

vitreous China Pattern :(i) in white

colour(iteam code 23010,23.112,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 100mm size P or S

trap for water closet squatting pan

including jointing the trap with the pan

113 30.00 and soil pipe in cement Mortar 1:1 (1- Each 311.85

Cement : 1-Fine sand)(A) Vitreous

China.(iteam code 23011,23.113,S.O.R

Ahemdabad City 2023-24)

Providing and fixing wash basin with single

hole for pillar tap with C.I. or M.S.

brackets painted white including sutting

holes and making good the same but

114 10.00 excluding fittings.(A) Vitreous China:(ii) Each 1400.18

Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.(iteam code

23018,23.127,S.O.R Ahemdabad City 2023-

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

mounted on 6mm thick A.C. sheet or

115 5.00 plywood sheet and fixing to wooden pluge Each 825.48

with C.P. brass screws and washers.(iteam

code 23024,23.143,S.O.R Ahemdabad City

Providing and fixing C.P. brass towel rail

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

116 5.00 600mm x 20mm size.(iteam code Each 597.22

23025,23.144,S.O.R Ahemdabad City 2023-

Providing and fixing screw down bib

taps of following size.(A) Brass screw down

bib tap polished bright. (i) 15mm dia.(iteam

117 15.00 code 23028A1,23.92,S.O.R Ahemdabad City Each 184.98

Providing and fixing screw down bib

taps of following size.(B) Brass chromium

plated screws down Bib Tap. (i) 15mm

118 12.00 dia.(iteam code 23028B1,23.92,S.O.R Each 184.98

Ahemdabad City 2023-24)

Providing and fixing brass screw down stop

119 30.00 15mm dia.(iteam code 23030A,23.96,S.O.R Each 203.79

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

120 12.00 fullway wheel valve.(A) 15mm dia.(iteam Each 184.98

code 23028A1,23.92,S.O.R Ahemdabad City

Providing and fixing Gun metal check or non-

121 15.00 fullway wheel valve.(B) 20mm dia.(iteam Each 201.80

code 23031B,23.99,S.O.R Ahemdabad City

Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

122 20.00 complete.(i) 20mm dia.(iteam code Each 252.26

23032A,S.O.R Ahemdabad City 2023-24)

Providing and fixing chromium plated

brass half trun flush cock of approved

123 15.00 quality including fixing in pipe line etc. Each 261.16

complete.(ii) 25mm dia.(iteam code

23032B,S.O.R Ahemdabad City 2023-24)

Providing and fixing Urinal or approved

quality including conecting the Urinal with

waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size

124 25.00 430mm x 260mm x 350mm.(iteam code Each 1026.01

23033,23.122,S.O.R Ahemdabad City 2023-

Providing and fixing Urinal of approved

quality including connection with trap and

with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware

125 25.00 550mm x 300mm.(iteam code Each 1535.63

23034,23.124,S.O.R Ahemdabad City 2023-

Providing and fixing ball cock of

approved. quality as directed.(A) Copper

126 30.00 Metal (i) 25mm dia.(iteam code Each 131.57

23037A1,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of

approved. quality as directed.(A) Copper

127 30.00 Metal (ii) 50mm dia.(iteam code Each 187.96

23037A2,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of

approved. quality

128 10.00 as directed.(B) Abonite (i) 25mm dia.(iteam Each 101.89

code 23037B1,S.O.R Ahemdabad City 2023-

Providing and fixing ball cock of

approved. quality

129 10.00 as directed.(B) Abonite (ii) 50mm Each 136.52

dia.(iteam code 23037B2,S.O.R Ahemdabad

Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass

hinges and rubber buffers. (B) Black plastic

130 50.00 seal and cover.(iteam code Each 288.45

23017,23.121,S.O.R Ahemdabad City 2023-

Providing and fixing Rubber plug for sink

131 40.00 or wash basin.(iteam code 23035 Each 16.98

,23.134,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

132 160.00 including making good the wall, ceiling and Rmt 165.21

floor etc. complete.[A] 15 mm.(iteam code

23055 ,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

133 160.00 nominal bore tube fittings and clamps Rmt 202.97

including making good the wall, ceiling and

floor etc. complete. [B] 20 mm.(iteam code

23056 ,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

134 200.00 nominal bore tube fittings and clamps Rmt 247.25

including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.(iteam code

23057,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall Ceiling & floor CPVC (SDR13.5) PIPE

having National Sanitation Foundation(NSF)

seal for potable water of following dia.

135 50.00 nominal bore tube fittings and clamps Rmt 330.36

including making good the wall, ceiling and

floor etc. complete. [D] 32mm.(iteam code

23058,S.O.R Ahemdabad City 2023-24)

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR13.5) PIPE

having National Sanitation

Foundation(NSF)seal for potable water of

following dia. nominal bore tube fittings and

136 50.00 clamps including making good the wall, Rmt 437.66

ceiling and floor etc. complete. [E]

40mm(iteam code 23059,S.O.R Ahemdabad

Providing and fixing concealed center point

to wall ceiling & floor CPVC(SDR13.5) PIPE

having National Sanitation Foundation

(NSF)seal for potable water of following dia.

137 130.00 nominal bore tube fittings and clamps Rmt 647.30

including making good the wall, ceiling and

floor etc. complete. [F] 50mm(iteam code

23060,S.O.R Ahemdabad City 2023-24)

Providing laying and jointing in true line

and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or

shall be concealed as directed including

138 100.00 necessary fittings etc. including testing of Rmt 71.93

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23061,S.O.R

Ahemdabad City 2023-24)

Providing laying and jointing in true line

and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23062,S.O.R

Ahemdabad City 2023-24)

Providing laying and jointing in true line

and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23063,S.O.R

Ahemdabad City 2023-24)

Providing laying and jointing in true line and

level 40 mm dia. U.P.V.C. Pipe(SCH-40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.(iteam code 23064,S.O.R

Ahemdabad City 2023-24)

Providing layingand jointing in true line and

level 50 mm dia. U.P.V.C. Pipe(SCH-40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concealed as directed

142 200.00 including necessary fittings etc. including Rmt 193.73

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.(iteam code 23065,S.O.R

Ahemdabad City 2023-24)

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard

143 15.00 weight.(i) Square mouth traps. (A) Each 1279.40

100mm x 100mm size P type.(iteam code

24006AA,24.19,S.O.R Ahemdabad City 2023-

Providing cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1

144 200.00 including neat cement finishing, watering Rmt 23.45

etc. complete.(iteam code 17015,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 30mm thick factory

made moulded door shutter wood free

consisting of frame made out of M.S. tubes

of 19 gauge thickness and size of 25mm

x 25mm for stiles, top and bottom

rails, M.S. frame shall have a coat of

steel primers. The inner panel shall consist of

25mm thick High Density EPS conforming

to IS 4671-1984 bonded with 2mm thick

termite proof, water proof and fire resistant

moulded PVC sheet with 2,4,6 raised panel

design in different plain and /or prelim

colours after routing the moulded design

on one side and 2mm plain and/or prelim

145 18.00 PVC sheet on other side of the EPS. The sqm 1960.00

edges of panel to be sealed with lipping of

10mm wide PVC sheet batton (made by

sticking 2 PVC rigid foam sheets of 5mm

thickness using PVC solvent cement)

and stiles 25mm (5mm x 5) thick and 30mm

width PVC sheet fitted along M.S. tube for

lock provision and for lock height 5mm

thick PVC sheet of size 150mm x

100mm fixed with upper and lower face

of inner side of EPS panel etc. complete as

per direction of Engineer in charge

manufacture’s specification and

drawing.(iteam code 10049,S.O.R

Ahemdabad City 2023-24)

Providing and fixing factory made polyvinyl

chioride (PVC) door frame of the size 50 x

mm with a wall thickness of 5mm, made out

of extruded 5mm rigid PVC foam sheet,

mitre out of two corners and joined with

2nos. of 150mm long brackets of 15 x

15mm M.s. Square tubes. The two

vertical door profiles are to be reinforced

with 19 x 19 mm m.s. square tube of

gauge, EPDM rubber gasket weather seal

to be provided through out the frame. The

door frame shal be fixed to the wall

using 65/100 mm long M.S. screws through

the frame by using PVC fasteners. A

miniumum of 4 nos. os screws to be

provided for each vertical members and

minium 2 nos. for horizontal members

etc. complete as per manufactures

specification and direction of Engineer in

charge.(iteam code 10050,S.O.R Ahemdabad

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

frame alround, square or round bars with

147 150.00 round headed bolts and nuts or by screws kg 100.17

(A) Plain Grill.(iteam code

10025AA,10.1,S.O.R Ahemdabad City 2023-

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

frame alround, square or round bars with

round headed bolts and nuts or by screws.

(B) ORNAMENTAL GRILL(iteam code

10025BA,10.1,S.O.R Ahemdabad City 2023-

Carring out plinth treatment to post

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC.

As Per 6131_paret-II Consentration Weight

149 100.00 one percent is recommended i.e one litre 20 Smt 104.90

EC chemical emulsion with 19 liter give

% concrentration inclusive of one litre

chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of

surface is recommended as per I.S(iteam

code 22007,S.O.R Ahemdabad City 2023-24)

Carrying out timber treatment to all

wood work including drilling holes and

spraying oil based chemical solution on

surface of timber work for termite control

including labor and material etc. complete.

Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by

mass) is recommended one litre chemical

emulsion diluted with 19 liters of

kerosene. Total diluted concentration

will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled

holes and 0.75 / Litre chemical per one

Sqmt two coat on wood surface not

protected by paint or varnish.(iteam code

22005,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(B) 20mm

dia.(iteam code 23031B,23.99,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(C) 25mm

152 5.00 dia.(iteam code 23031C,23.99,S.O.R Each 416.47

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(D) 32mm

153 5.00 dia.(iteam code 23031D,23.99,S.O.R Each 311.61

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(E) 40mm

154 5.00 dia.(iteam code 23031E,23.99,S.O.R Each 656.86

Ahemdabad City 2023-24)

Supplying nece hardware, G.I.Fittings

etc.comp of app. Quality as under

a 10.00 S.S. Stopper 30 Cm long of ASIS 304 No. 180.51

b 10.00 S.S. Stopper 20 Cm long of ASIS 304 No. 126.27

S.S. Aldrop 20 Cm long of ASIS 304 Grade

S.S. Aldrop 25 Cm long of ASIS 304 Grade

S.S. Aldrop 30 Cm long of ASIS 304 Grade

S.S. Handle for door/ window 10 Cm size of

g 10.00 Ball cock of copper 25 mm diameter Each 112.71

h 10.00 Ball cock of copper 50 mm diameter Each 161.02

i 10.00 Ball cock of abonite 25 mm diameter Each 87.29

j 10.00 Ball cock of abonite 50 mm diameter Each 116.95

k 10.00 Labour charges - Carpentar 1st Class Each 725.00

l 10.00 Labour charges - Carpentar 2nd Class Each 638.00

m 10.00 Labour charges - Plumber (Fitter) Each 697.00

n 10.00 Labour charges - Plumber(Fitter)Assist Each 570.00

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 63.50 x

horizontal two track member size 61.85 mm

vertical member of size 61.85 mm x

with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of

156 19.00 0.456Kg/mt, vertical member of size 40mm x Sqm 1696.73

Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float

glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per

details etc complete for window.(iteam

code 11028,S.O.R Ahemdabad City 2023-24)

Providing and fixing standared

extruded of alluminium section of size

/ Rmt with colour anodized

alluminium frame with 5 mm thick

157 20.00 transparent bronze colour tinted float Sqm 1288.93

glass with colour anodized alluminium

frame for ventilation with 5 mm thick

frosted glass as details etc complete

for.window(iteam code 11029,S.O.R

Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 127mm x

horizontal Four track member size

kg/m, vertical member of size 122.20mm

with sliding shutters of horizontal

158 18.00 member size 40mm x 18mm x 1.29mm@ Sqm 2119.14

0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with

5 mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for

window.(iteam code 11026,S.O.R

Ahemdabad City 2023-24)

Providing and fixing standared

extruded of alluminium section of size

Rmt with colour anodized alluminium

159 19.00 frame with 5 mm thick transparent Sqm 1509.90

bronze colour tinted float glass as

details etc complete for Fix window.(iteam

code 11031,S.O.R Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour Powder

Coated section frame main outer size

/ Rmt, horizontal two track member size

wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm

@ wt.of 0.0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x

160 15.00 vertical member of size 40mm x 18mm x Sqm 1688.78

1.29mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted

float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for

window.(iteam code11034,S.O.R

Ahemdabad City 2023-24)

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the

ends by end locks mounted on specially

designed pipe shaft with bracket plates,

guide channels and arrangements for

inside and outside locking with push-pull

operation complete but excluding the cost

of hood cover and spring. (A) Shutters having

width below 3.5.M.(iteam code

11006A,11.9,S.O.R Ahemdabad City 2023-24)

Providing and fixing 27.5 cm. long wire spring

grade No.2 of approved make for rolling

162 5.00 shutters.(iteam code 11007,11.1,S.O.R Each 630.91

Ahemdabad City 2023-24)

Providing and fixing Hood cover for rolling

shutters (A) Shutters having width below

163 25.00 meters(iteam code 11008A,11.11,S.O.R Rmt 120.03

Ahemdabad City 2023-24)

Providing and laying Cement concrete

1:5:10 (1- Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal

size) bedding for stoneware pipes of

164 20.00 following internal diameters with Rmt 125.90

necessary formwork and curing

complete.(A) 100 mm dia. (112 mm

Ave.bed thickness)(iteam code

24002A,24.2,S.O.R Ahemdabad City 2023-24)

Providing and laying Cement concrete

1:5:10 (1- Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal

size) bedding for stoneware pipes of

following internal diameters with

necessary formwork and curing

complete.(B) 150mm dia. (166mm Ave.

bed thickness)(iteam code

24002B,24.20,S.O.R Ahemdabad City 2023-

Constructing brick masonry

chamber for underground C.I. Inspection

chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2

in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal

dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate

166 5.00 20mm size) foundation concrete 1:5:10 Each 2903.89

inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.(iteam code

24016AA,24.44,S.O.R Ahemdabad City 2023-

Extra over items 136 for every additional

depth of 0.1M. of part thereof beyond

450mm depth for Brick masonry

167 16.00 chamber.(i) for 455mm x 610mm Each 239.99

size.(iteam code 24017A,24.46,S.O.R

Ahemdabad City 2023-24)

RCC Precast M.H.Frame & Cover

Manufacture , supply & Delivery at store or

at side of work Precast RCC M200 Frame &

Cover Suitable to drainage M.H. and as per

168 type design & Drawing including cost of

reinforcement M.S. Angles or Flat , cutting

mold work etc.(GWSSB SOR 2021-22)

Frame Suitable for 50 Cm opening of MH

Cover Suitable for 50Cm Opening Of MH

Frame Suitable for 50 Cm opening of MH

Cover Suitable for 50Cm Opening Of MH

c House connection Chamber Light Duty

1 5.00 Frame No. 911.00

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete

block 30cm length,30cm height and 15cm

thick of M200 grade concret as per

169 5.00 approved design and including excavation Rmt 376.43

for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine

sand) etc complete.(iteam code

14023A,S.O.R Ahemdabad City 2023-24)

Providing and fixing pre-cast Rubber Dye /

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and

as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer

for levelling and filling the joint with sand

in proper line and level as per guidlines of

IRC : SP 63- 2018 etc. Complete. (iteam code

14033,S.O.R Ahemdabad City 2023-24)

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S.

476 part IV, 100% humidity resistance

and also having thermal

conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight

calcium Silicate tile shall be of

approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid

171 400.00 on true horizontal level suspended inter Sqm 1632.63

locking metal grid of hot dipped

galvanized steel sections (galvanizing @120

grams per sqm including both side)

consisting of main ‘T’ runner suitably

spaced at joints to get required length

and size of 24X38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’

at 600mm centre to centre to form

agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick

(Minimum) sheet(iteam code 16006,S.O.R

Ahemdabad City 2023-24)

Providing and fixing false ceiling at all height

including providing and fixing of frame work

made of special sections, power pressed

from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37 mm, at

1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia

x 50 mm long with 6 mm dia bolts, other

flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts

& bolts of required size and other end of

angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of

mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm

172 60.00 long, the perimeter of ceiling fixed to Sqm 718.57

wall/partition with the help of rawl plugs at

450 mm centre, with 25 mm long dry wall

screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and

perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush

finish of tapered and square edges of the

board with recommended jointing

compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats

of primer suitable for board, all as per

manufacturer’s specification and also

including the cost of making openings for

light fittings, grills, diffusers, trap doors,

cutouts made with frame of perimeter

channels suitably fixed, providing

additional sections for strengthening the

oenings/cutouts, Trapdoors all complete as

per drawings, specification and direction of

the Engineer in Charge. Area of cutouts shall

not be deducted and no extra payment shall

be considered for additional sections

provided. Only plan area shall be considered

for payment. All curved surfaces, recesses,

waffles and corbellings shall be part of the

false ceiling & flat area in plan shall be

measured for payment. The rates are also

inclusive of necessary scaffolding, tools,

tackles etc. Complete for all floors and height

with frame wherever required for electrical

& A.C. fixtures & grill all as per drawings,

specification and direction of the Engineer in

Charge. all as per manufacturer’s

specification and as per drawings,

specification and direction of the Engineer in

Charge. Excluding the cost of painting with :

12.5 mm thick tapered

edge gypsum plain board conforming to IS:

Dismantling aluminium/ Gypsum partitions,

doors, windows, fixed glazing and false

ceiling including disposal of unserviceable

173 250.00 surplus material and stacking of serviceable Sqm 17.68

material with all lead as per instruction of

Providing and fixing in position Marine

Plywood of specified thickness following

code IS 710 - 1976 of approved makes as per

Interior design drawing/ Instruction of EIC

for all type of loose and fixed furniture,

Panelling, Partition, Bed head panel etc. The

rates are inclusive of all lead and lift,all floor

levels, all heights, all material, fixing,

scaffolding, labour, Wastage etc. complete in

a)Plywood 19mm th.

Extra over for plastering on ceilings and

sofits of stairs upto floor two level instead of

175 100.00 plastering on walls.(iteam code Sqm 24.57

17006,17.91,S.O.R Ahemdabad City 2023-24)

20 mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12 mm thick backing coat

of C.M.1:3 (1-cement:3-

sand)and8mmthickfinishingcoatof C.M. 1:1

(1-cement : 1-sand) etc. complete.(iteam

code 17009,17.95,S.O.R Ahemdabad City

Cutting out cracks of roof terrace to V-

section , cleaning out, wetting , grouting

with cement and sand slurry 1:3 (1-cement

177 10.00 3-sand )(iteam code 221002A,21.23,S.O.R Rmt 64.58

Ahemdabad City 2023-24)

Conveyance charge of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregates of any

kind executed outside the road site. Rate

178 also includes spreading & levelling etc

complete. Internal conveyance above 50 mt

done within the work site is not payable.

60.00 a) Lead From 5 Km to 10 Km. Cmt 78.54

60.00 b) Lead From 10 Km to 15 Km. Cmt 104.65

P/A Tremix with dewartering machine and

floater machine on constructed CC work for

finishing the surface as per requirement. The

179 60.00 rate including all machinaries, labor, loading, SMT 54.00

unloading, transportaion etc complete as per

direction given by engineer in charge.

Making 15 mm. Groove in RCC work on road

& filling it with polysulfied selant & finished

180 10.00 ot good incl. all labour charges etc. comp.as RMT 30.00

Repairing damaged M.H. and rasing M.H. up

to road level incl. removing damaged brick

work and repairing by brick masonry in C.M.

181 1:5 and plaster in C.M. 1:3 and fixing C.I.

steps and existing MH sheet cover, removing

the debris from MH and carting the same as

5.00 (A) up to 0.15 mt. (@ Two Coarse) No. 728.82

5.00 (B) up to 0.35mt. (@ Four Coarse) No. 1155.44

5.00 (C) up to 0.65 mt. (@ Seven Coarse) No. 1786.49

Constructing Chamber of following size

including excavation, refilling, BBCC (1:5:10)

for foundation, C.C.Channel (1:2:4), finished

15 mm thick cement plaster inside in CM 1:3,

182 finishing with cement slurry, Brick masonary

in CM 1:5 & excluding the cost of chamber

seat cover etc.completed.

0.60 X 0.45 mt. size Inside Clear, Depth

from 0.0 to 0.90 meter

0.60 X 0.75 mt. size Inside Clear, Depth

from 0.0 to 0.90 meter.

0.75 X 0.75 mt. size (Inside Clear) Depth from

0.0 to 1.20 meter.

Constructing Bombay Pattern Type Catch Pit

of size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick

brick maso. wall in the prop. of CM (1:6) with

40 mm thick IPS flooring in the prop M15 at

183 2.00 bottom and 15 mm thick cement plaster No. 3110.80

inside the catch pit in the proportion of CM

(1:3) with out jali etc. comp. as directed.

CatchPit Jali (Heavy duty) Fixing P/F FRC

catch pit jali with frame 600mm x 600mm

184 5.00 clear opening etc. comp.. As directed by No. 1377.64

engineer in charge.

R. C. C. PIPE (Vertical Cast) Providing and

supplying ISI Standard R.C.C. pipes in

standard lengths of following class and

diameter suitable for either collar joints or

rubber ring joints including all taxes,

insurance, transportation, freight charges,

octroi, inspection charges, loading,

unloading, conveyance to departmental

stores, stacking etc Note : One collar should

be supplied with each full length plain ended

RCC pipe, cost included in rates below. One

rubber ring should be supplied with each full

length socketed pipe, cost included in rates

Lowering, laying and jointing R. C. C. pipes of

following diameters in proper position,

grade and alignment at all level as directed

185 A by Engineer-in-charge including conveyance

from stores to site of work, labour, giving

hydraulic testing as per ISI code.

Providing and supplying,and jointing ISI mark

only standard length stoneware pipes of

following class and diameter including

excavation for laying of pipes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

186 etc. compl. (IS651/1989 or its latest revision)

including labour work for lowering, laying,

joiting with cement mortar (1:1) proportion,

proper postion, grade and alignment and all

level as directed by engineer in charge

including store to site of work jointing

material etc complete.

a 10.00 100 mm dia Rmt 165.52

b 10.00 150 mm dia Rmt 242.98

c 10.00 230 mm dia Rmt 400.54

Hiring Charges For J.C.B.Machine Inclduing

187 15.00 Cost Of Fuel, Operator, Dirver Etc.. Hr 600.00

Supplying Pneumatic Breaker Machine for

RCC Slab or Asphalt Demolishing Work on

site by using Operator, fuel, power Supply

etc. Complete as Directed. (No payment

188 30.00 should be allowed for non working condition Hr 600.00

of machinery and for pipe line excavation

and M.H. work. Allowed only for break down

work) (Based on Previously approved rate by

Constructing Slab type M.H. Chamber of the

following size including excavation, refilling,

brick bats cement concrete (1:5:10) of

thickness 15 C.M., CC Channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick

cement plaster inside & outside (Only for

shaft) in CM 1:3, finishing with cement

slurry, P/F 4 mm dia M.S.Steel HDPE coated

steps 35 cm c/c at 35 cm staggered in

masonary CM 1:5, RCC Slab in CC 1:1.5:3 of

thickness 23 C.M., including Cantering &

reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the cost

of Manhole seat cover etc..completed. of

Size 1.00 X 1.40 meter (Inside Clear, M.H.

length should be parallel to the flow.

1.00 to 2.00 meter depth, (Slab at Ground

2.00 to 3.00 meter depth, (Slab at below

3.00 to 4.00 meter depth, (Slab at below

1.00 mt. From G.L.)

Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 4.00 a. 150 mm to 300 mm dia. No. 1339.29

Cutting the pipes of following dia coming in

the new M.H.in running sewer including

cutting bars, including removing debris /silt

from the M.H. and carting at a suitable

191 distance etc..complete as directed. No

payment for M.H. work will be made until

pipe is not cut completely in all respect.

a 4.00 150 mm to 300 mm dia. No. 1133.93

Providing Kachha of Pakka Dummy in the

following dia pipes and removing the same

192 after completion of the connection work as

a 5.00 (A) 100 mm to 300 mm dia. No. 199.11

b 5.00 (B) 350 mm to 600 mm dia No. 302.68

Providing Dead Cantering using good quality

Country Wood Planks, wall Plate of required

thickness and size including placing the nece.

193 15.00 supports of reqd. size, nailing, fixing with Smt 312.50

mortar, levelling. All specification for dead

centring as per standard engg. practice etc.

comp. as directed.

Providing and operation dewatering Pump

including fuel charges & operator Charges

etc. as directed etc. comp. (Shift for Eight

194 5.00 Hour) (For Each Pump Set, No payment Shift 600.00

should be allowed for non working condition

Providing & Fixing the double layer safety

195 50.00 net along the scafolding to avoid any free fall Smt 194.00

of debris etc. complete.

Providing & Fixing the green/black colour

196 40.00 hessaian cloth to cover the scafolding etc. Smt 51.00

Structural steel work ( Confirming to IS 4923-

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete as per the structural

197 170.00 directions of Engineer in charge. Safety Kg 126.68

grills/doors of required pattern for windows

/ Door/ ventilators using M.S. flats/bar/box

sections as per design and drawing

including one coat of primer.(iteam

code20054,S.O.R Ahemdabad City 2023-24)

F.R.C. Extra Heavy Duty (EHD-35) Manhole

Covers & Frames Cover : 728mm ø &

mm thick circular cover, 35.00 MT load

design, 100x2mm MS flat allround, 16mm ø

plain round bar for lifting the cover & should

be fitted with plastic cups. Frame : 560 mm ø

clear opening, outer size- 888x888x175 mm.

198 5.00 On the upper periphery of frame 25 x 3 mm Set 3354.74

wide MS flat should be well embed in

concrete to protect the edges of frame. FRC

E.H.D.-35 manhole cover & frame described

F.R.C. Heavy Duty [HD-20] Machinehole

Covers - 560 mm ø clear opening, The

199 5.00 dimension of frame and cover as per No. 1720.44

mentioned in Amend No.1 to IS 12592 :

F.R.C. Medium Duty [MD-10] Machinehole

Covers - 560mm ø clear opening, The

200 5.00 dimension of frame and cover as per No. 1255.52

mentioned in Amend No.1 to IS 12592 :

Carting and Fixing M.H., Chamber or

Catchpite Seat and Cover in line and level to

match exisisting road level in C.C. 1:2:4 and

201 10.00 finishing smooth, watering and protecting No. 750.00

for 7 days etc. complete as directed. M.H.

seat cover will be supplied byA.M.C.(from

Supplying, labour for break down repairing

work for activities like excavation, disliting,

202 removing debris from trench back filling etc.

comp. as directed by Eng.in charge.

20.00 Mazdoor at day /Night No 363.30

20.00 Fitter at day / Night No 380.30

20.00 Makadam/ supervision at day / Night No 379.46

P/F. to wall ceiling and floor galvanized mild

steel tubes (Medium grade) of the following

nominal dia. with all tube fittings and clamps

203 incl. making good the wall, ceiling and floor.

(At any floor level) (Bldg.Sor 2015-

Providing & Applying Cement Popada

Plaster In Cement Mortar In 1 : 3 Incl.

Cleaning Surface Before Plastering Rate Also

204 160.00 Incl. Scafloding, Watering , And Neat Smt. 120.00

Finishing Etc. Comp. As Dire.(N.S./ARC)

Providing and applying fibere reinforced

cementitious micro concrete work in cellings

and beams incl.mixture of CEMSCREED HM

(F) fair mate company material, FBR bonding

agent material with water in suItable

proportion anti corrosive treatment on

exposed beam,celling steel bars with

safeCore R incl.all kind of labour

etc.comp.including three coat of white

wash.(Approved Rate in ARC)

Labour Work for moulding the polish kota

stone surface rate also including provding

206 60.00 cutting and grinder machine for molding Rmt. 150.00

work etc.complete as directed.(app.rate)

Labour work for Polish kota stone surface

rate also including providing cutting and

grinder machine for molding work etc

comlete as directed.(app. rate)

Providing And Laying Cement Concrete

Flooring For I.P.S.1:2:4 (For Indian Patent

Stones) (1 Cement: 2 Coarse Sand:4 Graded

208 300.00 Stone Aggregate 20 Mm. Nominal Size) Smt. 198.45

Lain In Layer Finished With A Floating

Coat Of Net Cement.(40 Mm Th.)(SOR

Additional Rate For Providing Water Proofing

Solution in I.P.S

Providing and Fixing pvc.Door (sintex door-

equivalent) with necessary alluminium fitting

210 25.00 with EL-7 section frame (Approved Rate as Smt. 1617.00

P/F glass of 4 mm thik for vent lowers and

window with wooden border patti as per

211 65.00 instruction of eng. In chage.(app.rate) No. 150.00

Providing and fixing rough cast wired glass

mm thick bedded in putty and thick with

wooden beading including the cost of

212 wooden beadings of Indian teak wood and

necessary cutting of glass. (SOR 2021-22 PG

30.00 (C) wired figured glass. Smt. 659.58

Labour work for fixing above or any

interlocking blocks/nimbhada on up to

50mm th sand bedding,levelling,watering anf

fixing. Rate incl. average 30cm depth for

excavation and or filling,carting away

debries/excavated material up to 5 km and

cleaning the site etc.comp. as

directed.I00194

Providing & Laying China Mosaic Flooring On

Terrace With 6Mm Th.White Or Coloured

Glazed Tiles Chips Of Mini.25 To 35Mm

Approved.Square Or Rectangular Shape &

Fixing It.Before Start The Work Remove All

Existing Flooring & Open Old Slab Surface

With Wire Brush & Fill Crack If Shown With

Water Proof Material.Than For Making Level

Gps.Work Done In Mini.45 To 50 Mm Th.&

Fixing.China Mosaic In Cm 1:3 With Neat

Cement Slurry At Top & Filling The Gap With

214 10.00 White Or Colour Cement With Finishing Smt. 700.00

Smooth Surface & Even Shade

Incl.Cleaning Of All Dirt,Dust & Other

Foreign Matter.Rate Including For Making

Colour Patta,Round Vata With Fixing

Neccessary Water Spout Opening Gap

Etc.Comp.As Directed.(As per A.R.C)

Providing and laying polished granite stone

slab 18 mm thick in risers of steps, dedo and

pllars laid on 10 mm thick cement mortar 1:3

215 30.00 (1 cement : 3 coarse sand) and jointed with Smt. 2672.00

gray cement slurry including rubbing &

polishing etc. complete. (SOR 2015-2016,SR.

Providing & fixing 2.00 mm thick F.R.P. sheet

of good quality and standard make rate also

includes necessary fabrication structure in

the grid of 1'-6" x 1'-6" size usiung hollow

216 25.00 rate also inclusive necessary bending ,cutting Smt. 1865.00

and fabrication charges and priming coat and

2 coats of oil paint of shade approved by

engineer in-charge rate also includes washer

and silicon paste required for fixing the sheet

in good quality as diredted.(As per ARC)

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

217 30.00 excavated rock, fly ash, aggregate of any kind Cmt. 235.51

etc. comp. upto 5 km lead. (Bldg.S.O.R. 2021-

Providing & Fixing Chromium Plated Brass

Flush Cock With Lever Of "Ess Ess" -

Trend Series Or Equivalent Make

218 5.00 Incl.Fixing In Pipe Etc.Comp.As Dir.Of No. 1800.00

Engg.In Charge.(N.S.) (1) 25 Mm Dia.I00117

Provdg. & fixing 12.5 lit.PVC Flush tank with

nece.fixtures etc.comp as per site condition

P/F Jet Spreay at Europeon WC Pan, incl

nece. lath connection, stop cock, and other

220 100.00 fixing material and labour as per inst. of No. 361.00

engineer in charge(R&B Sor 21-22 I.C NO

Providing & Fixing Polytheline Over Head

Tank With Necessary Dia.Holes For

221 10000.00 Outlet,Inlet Over Flow And Washout lit 7.72

Necessary Washer And Checkput

Etc.Comp.(N.S.) I00105

P & F app.quality for Conseal lock in

222 10.00 Alu.door .as per inst of engg in charge No. 300.00

.etc.comp.(app.rate)

P & f app.quality for brass baby latch (door

223 10.00 stopper) as per inst of engg in charge No. 180.00

.etc.comp (app.rate)

Providing & Fixing In Position Alluminium

Doors With Frame Using Approved Quality

Anodised Extruded Alluminium Section As

Approved By Engg.In Charge(Jindal

Alluminium) (A)Frame Sections 101.6x44.45

Mm(B)Shutter Bottom Vertical & Top

Section 83.5x44.45 (Wt.1.31 Kg/Mt.)(At

1.31Kg/Mt)(C)Shutter Bottom Section

224 45.00 At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter Smt. 2900.00

Middle Section At 100x44.3

Wt.(1.37Kg/Mt) Incl.Providing & Installing

Mm Thick Approved Color Acrylic Sheet Of

Standard Quality Fixed With Glazing Chips

On Upper Pannel & Laminated Sheet

On Lower Pannel (Wtt.0.13 Kg/Rmt)

Etc.Comp.As Direction Of Engg.In Charge.

Providing & Fixing In Position Alluminium

Window Sliding / Fix Type With Frame Using

Approved Anodised Extruded Alluminium

Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

(A) Frame Sections 65 X 25 Mm (At

0.41kg/Mt) (B) Sliding Frame Bottom Section

Of 61.85 X31.75 Mm (At 0.41 Kg/Rmt) (C)

Shutter Top & Bottom Section 40 X

225 40.00 Mm (Wt.0.41 Kg/Rmt) (D) Shutter Interlock Smt. 2350.00

Vertical Section 10 X18 Mm.(0.41 Kg/Rmt)

(E) Shutter Vertical Of 40 X 18 Mm (0.41

Kg/Rmt) Including P/F Installing 5 Mm

Thick Approved Color Acrylic Sheet Of

Standard Quality Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition

with powder coating using 2.5'' x 1.5'' all

section work incl.p/f 5 mm thick glass in

upper portion and 10 mm th. Novapan panel

226 60.00 in lower section Work incl.fixing the partition Smt. 2500.00

in wall/floor with nece.screws,rubber gasket

& other fittings etc.comp. as directed by

engg.incharges.

Providing & Fixing In Position Alluminium

Vents With Frame Using Approved

Anodised Extruded Alluminium Section As

Approved By Engg.In Charge.(Jindal

Alluminium) Units Equivalent (Approved

227 20.00 Rate) Frame Section Of 63.50 X 38.50Mm Sq. M. 1950.00

(Wt.0.68 Kg/Rmt) Incl.Providing & Installing

Mm Thick Approved Color Acrylic Sheet Of

Standard Quality Etc.Comp. I00136

Providing fiiter for D.I./P.V.C./C.I./M./A.C.

Pressure water pipe linmaintenance work

with necessary manpower, tools, plants, and

228 20.00 equipments, and any other works required No. 474.00

for AMC as per instruction of Engineer in

charge etc. complete. I03723 As per Market

Providing and fixing stoper (M.S.) 6 inch with

necessary fiting in wooden door including

229 30.00 removel of old fiting if any etc completed as No. 47.00

directed. I00870 6 inch

Providing and fixing Aldrop 10 mm size (M.S.)

with necessary fiting in wooden door

230 35.00 including removel of old fiting if any etc No. 158.00

completed as directed. I00872 Aldrop 10mm

Providing and fixing handle (M.S.) 4 inch size

in with necessary fitting in wooden windows

231 35.00 including removal of old fitting if any etc No. 39.00

completed as directed.I00873

Providing and fixing stopper (aluminium)

inch with necessary fiting in wooden door

232 40.00 including removel of old fitting if any etc No. 40.00

completed as directed. I00890 6 inch

Providing and fixing Aldrop 10 mm size

(aluminium) with necessary fiting in wooden

233 25.00 door including removel of old fiting if any etc No. 138.00

completed as directed I00891

Providing and fixing handle (aluminium)

inch size in with necessary fitting in wooden

234 30.00 door including removal of old fitting if any No. 36.00

etc completed as directed.I00889

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour

235 45.00 included. If necessary rate also incl. of No. 500.00

removing from position and refixing it at

same place after repairing it, etc comp. as

directed. Sub Desc : As per approved rate of

AMC MET work I01334

Repairing of Doors/Windows shutters and

Frames including refixing-aligning shutter,

providing, replacing, fixing MS hinges,

236 40.00 Aluminium aldrops, stoppers, tadi etc. No. 250.00

complete excluding painting as per

specifications.(app.rate)

Providing & Fixing wall,ceiling and floor

Kg.F/Sq.Cm 160 mm working pressure

polythelene pipes of low density, complete

237 100.00 with special flange compression type Rmt 785.00

fittings,wall clips etc.making good wall

ceiling and floor as directed by engg.in

charge etc.comp.

P/F. 10 mm thick Novapan sheet of approved

quality including fixing on partition with

238 50.00 necessary all fixtures as directed by engg.in Smt. 1400.00

charge etc.comp

P/F. new 12.5mm th. Gypsum board ceiling

with necessary heavy weight GI framing

members as per site requirement.Work incl.

Supplying of app.brand gypsum boards and

239 30.00 fixing it as false ceiling in line and level with Smt. 650.00

all necessary hardware and labour etc.

comp.as dire. (At any floor level)

GLASS FILMS (sun control, Safety film,

decorative, reflective, frosted, opaque film

240 30.00 etc) Imported Lumaar make as approved by Smt. 540.00

engg.in charge etc.comp.

Providing and fixing 4 mm th. Acrylic sheet of

approved quality including fixing with

241 10.00 door/window shutter & frames with Smt. 3140.00

necessary all fixtures as dircted by engg.in

charge etc.comp.

Providing & Fixing Floor Spring including

242 3.00 fixing shutter etc. complete as per inst. of No. 3300.00

engineer in charge.

P/F. thermocol ceiling with necessary

aluminium T section 25 x 25 x 1.2 mm

inclusive fixing it to all wall to ceiling junction

and at junction position of two sheets ,item

also includes p/f 20 mm thick plain

243 10.00 thermocol sheets size (1 x 0.5 mt) with all Smt. 375.00

necessary fastening and hardware etc.

comp.as dire. (At any floor level)

labour charge for cleaning U.G. and O.H. tank

by modern science technology with six stage

process as below: (1)Dewatering existing

water by submersible pump. (2)Hydro

jetting by 150kg/sqcm pressure.(3)Vaccum

cleaning to suck the sludge and turbidity on

bottom surface.(4)Heat air system by 80C

temp for drying corners and all side of

tank.(5)Antibacterial chemical spraying to all

surface of tank and then(6)Ultra-violet

244 radiation pan treatment to tank in this six

stages on site classic supply etc.Electric

connection shall be provided by AMC MET

without charging any extra cost.the

complete tankcleaning by micro cleaning

system comp. as ditected.rate of above

process are as below capacity of tank.

A 1.00 up to 5000 litre NOS 1200.00

B 1.00 5000 litre to 10000 litre NOS 1500.00

C 1.00 Under Ground water tank LITER 0.05

Providing and applying texture paint at

approved quality, colour scheme, including

preparation of surface, primer 2 coats+2

245 200.00 coats of putty and texture paint, as per Smt. 495.00

manufacture's specification, scaffolding,

roller finish etc complete as per instruction

of engineer in charge

Supplying and installation of 10mm thick

recycled rubber flooring having anti-skid and

sound absorbing properties, square shaped,

with different color optns for create flooring

pattern, should be installed with proper

adhesive as per manufactures's guidelines,

joints of surface to be done properly to

prevent dirt & watepenetration inside the

surface. etc complete as per instruction of

engineer in charge

Arrangement of zula with two or nece.

skilled labour for repairing & maintenance

247 30.00 work out side building work etc.complete as No. 950.00

per insructer incharge(At any floor level)

Providing Scaffolding for Demolition Plaster

Work & painting workby 'H' Frame Stand of

by any means like bamboo, balli etc.

248 500.00 including carting material work site and Smt. 40.00

removing after completion of work. Rate

include any type rent etc. complete for any

height as directed by engg. in charge.

Providing, Manufacturing, Fixing Chain Link

Jali 8".0" X 4".0" as per detailed Sketch &

instruction of Engineer in Charge same as Lal

Darwaja Garden Pattern Consisting of 3" dia

MS pipe A class 5".4" height fixed at 8".9" in

C.C. (1:2:4) block of 9" X 9" X 9" size chain

link jali 2" X 2" X 10 gauge fixed in 35 X 35 X

mm MS angle frame of 8".0" X 4".0" size with

249 10.00 MS flat of size 25X3 mm welded with jali etc. Rmt. 1940.00

Comp. The Jali is to be Welded to MS angle

with MS Flat as per instruction given. The MS

Pipe Jali, MS angle frame are to be painted

one coat of primer & two coats of paint as

directed, in line and level.The two hold fast

has been welded at equal distance at the

bottom angle of jali for support fixed in C.C.

as directed by Engg. in Charge.

Providing and fixing Aluminum Composite

Panel signages of various size and in any

language. The 2 mm thick Aluminum Sq.

250 1200.00 composite panel shall be cladded with retro 6.00

reflective high intensity grade radium sheets.

The signages shall be of any language

251 10.00 G.I. Coupling 50 mm dia A-Class RMT 80.51

252 10.00 G.I. Coupling 40 mm dia A-Class RMT 40.68

Providing & Fixing Door closer-complete of

Approved make to wooden / Alluminium

253 30.00 Doors as per direction of engg.in No. 480.00

Providing and applying pressure grouting

with Water proofing materials silicon

254 2.00 baseWater repellent compund including Smt. 2345.00

matrial, labour with required all machinery

and etc complete. (R.A.)

Providing and fixing Polycarbonate roof

Lexan sabic 10 mm th.sheets of approved

make, on structural roofing / sky ligh

structures in shapes as per Architect’s

255 16.00 drawing. The rate shall include cost of Smt. 2094.29

scaffolding, screws, nuts, bolts and all

necessary fixtures and fastening etc

complete (Rate excluded structural steel

Providing and laying brick bat coba water

proofing of average 100 mm. thick for sunk,

balcony, terrace, rain water gutter at all

heights/ floors using cement mortar 1:3,

arranging brick bats according to the slope,

adding suitable water proofing compound

for water-tightness and again providing on

top cement mortar 1:3 including addition of

waterproofing compound and finishing the

top with neat cement @ 2.75 kg/m² and

preparing the rough surface if required as

256 150.00 per direction and instructions, complete. The Smt. 567.00

work should be carried out through an

approved specialized agency. The contractor

to give testing for water tightness and

provide guarantee for 10 years on Rs. 300/-

stamp paper in approved Performa. as

directed by EIC. (R.A)

Providing and injecting approved grout in

proportion recommended by the

manufacturer into cracks/honey-comb area

of masonry by suitable gun/ pump at

required pressure including cutting of

nipples after curing etc. complete as per

directions of Engineer-in-Charge. Stirrer

257 50.00 mixed SBR Polymer(of approved make) kg 101.55

modified Cement slurry made with Shrinkage

Compensating Cement in masonry work.

(The payment shall be made on the basis of

actual weight of approved grout injected.)

Providing & Placing dual shrinkage-

compensated,high flow cementitious

microconcrete added with aggregates in

1:0.5 (1 Powder:0.5 aggregate)proportion &

suitable water microconcrete ratio so as to

acheive compressive strength not less than

258 1.00 40MPa at 28 days for column jacketting Cmt 28647.00

inclusive of Labour, material, curing and

equipment for all

heights, location, shape & size as directed by

the architect/engineer incharge. (The mode

of measurement shall be as that of RCC as

per IS code)(APPROVE-ARC)

Providing & Applying One componant dual

shrinkage-compensated structural Grade

ready to use repair mortar in two or three

layer for repairs of beams etc. including all

materials, labour etc. for all heights, location,

shape & size.The finish surface to be level

259 100.00 matched with the existing adjoining surface Kg 40.40

etc. complete as directed by

Architect/Engineer Incharge. [Quantity

consumed shall be accounted for payment

purpose].(APPROVE-ARC)

Providing & applying one or more coats of

Nondegredation(which dont reqire removal),

acrylic resin based membrane forming single

componant liquid curing compound for

260 30.00 sealing of moisture & curing including all Smt 57.00

materials labour etc. for all heights,locations,

shape & size as directed by the engineer

incharge.(APPROVE-ARC)

Providing & applying of 6-9 mm thick 1:3 CM

(1 Cement : 3 fine sand ) mortar over one

coat of epoxy bond coat on all type of

261 5.00 surface for all shape,size & height including Smt 661.00

all labour, material,scaffolding, curing

etc.complete as directed by the Engineer

incharge.(APPROVE-ARC)

Providing & applying polymer modified

cement mortar in the proportion cement :

sand in 1:3 (by weight) fortified with SBR in

or 3 or 4 layers upto 50mm overall

thickness,wherever total thickness of repair

is exceeding 50mm, use of 10/ 6 mm down

size aggregate may be required. The finish

surface to match with the existing adjoining

surface etc. complete as directed by

Architect/ Engineer Incharge. [Quantity of

SBR actually consumed shall be measured for

payment purpose].(APPROVE-ARC)

Providing & applying polymer modified

cement mortar in the proportion cement :

sand in 1:3 (by weight) fortified with SBR in

or 3 or 4 layers upto 50mm overall thickness.

The finish surface to match with the existing

263 15.00 adjoining surface etc.complete as directed Smt 1187.34

by Architect/ Engineer Incharge. [Quantity of

SBR actually consumed shall be measured for

payment purpose].(APPROVE-ARC)

Galvanic Sacrificial Protection of steel:-

Providing and fixing sacrificial zinc anode to

prevent initialization of corrosion of

reinforcement due to chloride ingress from

VECTOR Galvashield XPI or equivalent at

Min. 2 to 3 anode/sqm area of concrete

(spacing of 300 to 600mm), covered with

mortar with of resistivity less than of parent

concrete on the cleaned reinforcement steel

264 10.00 as per manufacturers specification before No 1402.00

applying passivation coating. Item rate is

inclusive of the meterials all labour,

supervision , tools and tackles and

transportation etc. complete as per

specification and as directed(APPROVE-ARC)

Providing and fixing PVC plain colour false

ceiing with grid type with a luframe

consisting of 600mmx 600mm 3mm thick

plain PVC sheet used as panel insert in a

frame work made using an odized

alluminium T section of size 1”x1” (25 x

25mm,19 gauge or 1mm thick) in square

pattern of grid sizes of 2x2 (600 x

600mm).The alluminium frame work is

supported from the ceiling with the help of

265 30.00 G.I.hook and G.I.wire/6mm M.S.rods of Smt 300.12

required sizes to maintain proper level

etc.The aluminium frame work is supported

on side wall with the use of alluminium

Lsection of size1x1 (25x25mm)angle

set.Complete as per direction of Engineer

incharge. Manufactures, specification and

Providing and fixing 30 mm thick FACTORY

MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes

of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top

and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and

manufacture, M.S. frame shall be covered

with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm forming stiles,

and 5mm thick 75mm wide PVC sheets for

top rail,lock rail and bottom rail on either

side, and 10mm (5mm x 2) thick, 20mm wide

cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails

with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together

with solvent cement adhesive,. An additional

5mm thick PVC strip of 20mm width is to be

stculk on the interior side of the ‘c’ channel

using PVC solvent cement adhesive etc.

complete as per direction of Engineer in

charge,manufacture’s specification and

drawing.(APPROVE-ARC)

Supplying Potable Water Tanker attached

with motorpump to be filled from nearby

water distribution station of AMC. with

meter Delivery Pipe. The tanker should be

supplied as & where reuired & when order

267 25.00 placed by Engineer In- Charge The rate Trip 450.00

includes the fuel charge, driver's charge

etc.complete. (APPROVE RATE At amc met-

2mm Aluminium/ 4mm ACP sheeting fixed

with Type-Class-B High Intensity Grade

Sheeting as per IRC67:201 reflective sheeting

of size including lettering and signs as

268 5.00 applicable,pageNo38,Item code-M1048 Smt 3955.08

Ahmedabad City Building SOR 2023-24- With

out GST(APPROVE ARC)

Providing and fixing of Roller blind

curtain/blackout.The fabric shall be woven

from formulated platisol extruded over a

polyaster yarn.The fabric should be weaved

to provide subtle view of the side of the

269 25.00 blind and should offere limination of glare Smt 2610.00

and sunlight radiance up to a minimum of

80%.The fabric shall be flame

retardant.(Approved rate)

Wall panelling with 12mm MDF fixed to

existing alluminium framing and making

270 10.00 grove as per design and finished with royal Smt 1688.00

plastic paint as per instruction of engineer

incharge. (N.S.)

Providing&Connecting 75mm/100 mm dia

PVC joints like Coupler,Tee,Y-

joints,Connecting Pipe to wall,ceiling&floor

open/concealed PVC pipe line 10Kg. F/Sq.Cm

working pressure of" Prince/Finolex" or

equivalent Brand of following nominal bore

with all required fitting with brass insert

wherever required,clamps&solution

incl.making good the wall, ceiling and floor.

Providing and laying ACP sheet for Elevation

to be fixed on availabel alluminum section

272 5.00 structure,all fixing materials,finishing,all lead Smt 2200.00

and lift,etc.complete as per engineer in

Providing and laying ACP sheet for Elevation

including fixing on alluminum section

273 5.00 structure,all fixing materials,finishing,all lead Smt 3150.00

and lift, etc. complete as per engineer

Providing&Fixing Stair/Balcony Railing as per

Consultant's Design from M.S.square

Rectangular,Round pipe of required

Dia,M.S.Flat,Angle,channel&other sections

274 15.00 of required size as per detail work include Rmt 965.00

sutting,bending,welding,grinding,Fixing with

necessary supports-hold fasts,Application of

one coat of Zinc Primer,Two coats of Oil

Painting etc.complete.(N.S.)

Fabricating,supplying and fixing in position

SS railing for staircase and balcony with

brush finish and 304 grade as perIndian

Standrd and detailed drawing including

grinding,cleaning and filling the welded spots

with SSfinish (Only Length will be paid for

payment heigth max.1.2mt.).The Work to be

executed as per consultant drawing.Top

275 10.00 Rail:S.S.Railing pipe 50mmx16GAS IS 304 Rmt 4213.00

Grade Vertical Support: S.S.Rialing Sq pipe

32x32mmx16 GAS IS 304 Grade (at every

1.0mt to 1.20mt c/c)Horizontal Safety

members :S.S. Railing pipe 16 mm x 16G ASIS

304 Grade (4 Nos. min.)

Providing and fixing 23cms wide chicken

mesh jaali with nails&then application of

276 143.72 15mm plaster on R.C.C.&Masonary joints as Rmt 220.00

per directed of Engineer in Charge

Providing&Mixing of Waterproof Chemical in

Cement mortar for Inside/outside Plaster

work of"Roof","Fosroc"or equivalent make in

277 60.00 proportion as per company's user Liter 260.00

manuals&Direction of engg. In charge.

Providing and fixing brush finish stainless

steel(304)stair case railing which includes

cutting/bending/welding/buffing to give

brush finish and grouting in cement concrete

with anchor fasteners without disturbing the

flooring or as approved by the

consultants.THREE Horizontal pipes of 38mm

278 4.00 diameter each and top pipe of 50mm Rmt 3935.00

diameter.Vertical Post of size 50mm

diameter at every 1200 mm.At the end and

start of the flight,baluster of75mm diameter

pipe shall be fixed.

Providing and fixing Kitchen sink with C.I. or

M.S. brackets,painted white including cutting

holes in walls and making good the same but

279 3.00 excluding fittings. ©Vitreous China Sink. (i) Nos 2257.69

600 mm x 450 mmx150 mm size

Providing & Fixing S.S.304 Grade Sink of

Nirali / Krishna or Equivalent Make for

280 3.00 Kitchen Platform of size :24"x18" as per Nos 4650.00

Direction of engg. In charge

Supplying and fixing Conductive anti static

homogeneous Anti bacterial & Anti fungal

Vinyl flooring rolls of P group of approved

make & shade minimum 2.0 mm thick of

standard sizes as per EN 649/relevant code

of manufacturers specification having

years replacable warranty over the existing

floor. The rate shall include all cuttings and

wastages, cutting and providing tile above

electrical trunking, cost of all materials

adhesives of approved make etc, including

welding of joints., Coving and copper strips,

complete all as per detailed drawings and

specifications as directed by EIC Material to

be installed using Conductive Adhesive only.

Only laid area will be measured for payment.

Rate Includes lead and lift at all floors. The

item to include all materiral, fixing,

scaffolding, labour, Wastage etc. complete in

all respects. Note: No extra payment pay for

architectural Ornamental Design upto 10% of

flooring area. Rate shall be inclusive of

cutting of tiles in any shape, at any level for

service cutout.

SIGNAGES HANGING FROM CEILING

Providing,Fabricating&Fixing signage's using

304 grade Stainless steel1.5mm thick

brushed steel finish plate (2nos) with 8mm

thk. Acrylic sheet covered with vinyl of

approved colour,sandwiched between two

S.S plate and fixed with s.s

struds.Sandwiched plates should be fixed in

12mmX12mm S.S 1.5mm thk .304 grade

282 50.00 frame and punched(lasercut) lettering Sq.inch 61.60

carried out on both the s. s plate so

frequired size and text as directed by

Engineer and hanged to ceiling with the help

of S.S 8mm thick chain at both ends with

making all the fixing arrangement to the

ceiling and to the plate complete.

providing and Fixing High Quality Vinyl

Printing with Pasting in Lamination in 3 mm

foam sheet with loading, unloading, labour

283 20.00 Charges ETC Complete.Approved Rate in Sq.Feet 62.00

Publicty Department I.N.6,7,16

providing and Fixing Recto reflective Vinyl

Printing with ACP sheet Sinages with loading,

284 20.00 unloading, labour Charges ETC Sq.Feet 240.00

Complete.Approved Rate in Publicty

Department I.N.34

FIRE EXTINQUISHER (CO2,ABC,K-TYPE)

Refilling and servicing of ABC Type (Mono

Ammonium Phosphate 50%) Fire

Extinguisher with a capacity of 6 KG,

including complete discharge, internal

285 10.00 cleaning, refilling with fresh MAP 50% Nos 850.00

powder, cartridge checking, and overall

inspection as per safety standards.(approve

rate at amc met-piu)

Refilling and servicing of CO₂ Type Fire

Extinguisher with a capacity of 4.5 KG,

including safe discharge of residual gas,

internal inspection, valve servicing, and

refilling with certified CO2 gas as per safety

norms..(approve rate at amc met-piu)

Complete refilling and servicing of K-Type

Wet Chemical Fire Extinguisher with a

capacity of 6 Litres, specially designed for

kitchen and cooking oil fire hazards.

287 1.00 Including safe discharge, internal cleaning, Nos 4800.00

refilling with approved wet chemical

solution, and valve assembly servicing as per

safety compliance standards..(approve rate

at amc met-piu)

Providing and fixing, testing and

commissioning of Dry Chemical Powder

(ABC) Store Pressure type 6 kg confirm to IS:

15683, with ISI marked / TAC approved fitted

288 1.00 with required accessories including wall Nos 2495.00

suspension brackets.(approve rate at amc

met-piu ARC Tender)

Providing and fixing, testing and

commissioning of Carbon Dioxide (Co2) type

Fire Extinguisher of 4.5 kg confirm to

289 1.00 IS:15683, with ISI marked/TAC approved Nos 4710.00

fitted with required accessories including

wall suspension brackets.(approve rate at

amc met-piu ARC Tender)

FURNITURE ITEAM

Meeting Room Conference Table.(approve

290 5.00 rate at L.G &SCL HOSPITAL ) R.ft 2250.00

Executive Hydraulic Revolving Chair with

foam rubber Handel,directed by Engg. in

291 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 15010.00

Medium Back Revolving Chairs with foam

rubber Handel,directed by Engg. in

292 1.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 10580.00

Medium Back Revolving Chairs with foam

rubber Handel,directed by Engg. in

293 2.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 15050.00

Box Type Sofa Two Seater Foam

Rexin/Tepestri Cusion,directed by Engg. in

294 1.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 27920.00

Box Type Sofa Three Seater Foam

Rexin/Tepestri Cusion,directed by Engg. in

295 1.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 38850.00

Round Tripod,directed by Engg. in

296 2.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 8750.00

Side Tripod (Size: 18" x 12" x 15")

Laminated,directed by Engg. in

297 3.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 1450.00

Office Chair with foam on seat-back

side,directed by Engg. in Charge.(approve

298 3.00 rate at L.G &SCL HOSPITAL ) Nos 5800.00

Students Chair with writing pad,directed by

Engg. in Charge.(approve rate at L.G &SCL

299 2.00 HOSPITAL ) Nos 3500.00

Stool for Peon with laminated Top (Size: 13"

x 13" x 21"),directed by Engg. in

300 2.00 Charge..(approve rate at L.G &SCL HOSPITAL Nos 2160.00

Waiting Area's Chairs in Set of 3 Nos,directed

by Engg. in Charge.(approve rate at L.G &SCL

301 2.00 HOSPITAL ) Nos 7200.00

Executive Table Laminated Top Drawer

Cabinate with Side Cabinet(Special Shapes as

302 1.00 per Requirement),directed by Engg. in Nos 33685.00

Charge.(approve rate at L.G &SCL HOSPITAL )

B-Table with top laminate and with Top two

303 2.00 cabinate and apron,directed by Engg. in Nos 15850.00

Charge. (Size:4'X2'X2.5')

Computer Table with Key Board Drawer &

Cabinet (Size: 4' x 2' x 2.5"),directed by Engg.

304 2.00 in Charge .(approve rate at L.G &SCL Nos 12045.00

E-Table Laminated Top with one Cabinet

(Size: 3' x 2' x 2.5),directed by Engg. in

305 3.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 7000.00

Podium For Teacher's In Teaching

Room,directed by Engg. in Charge.(approve

306 1.00 rate at L.G &SCL HOSPITAL ) Nos 7140.00

Steel Trainee Locker with 12 Nos. (Approx.

Size 78" x 36" x 18"),directed by Engg. in

307 1.00 Charge.(approve rate at L.G &SCL HOSPITAL ) Nos 20500.00

Big Steel Reck with 6 Partition (Size: 6.25' x 3'

x 1.25),directed by Engg. in Charge.(approve

308 1.00 rate at L.G &SCL HOSPITAL ) Nos 6800.00

20 Gauge Steel Store Cupboard with Two

309 1.00 Partition,directed by Engg. in Charge. Nos 10050.00

(Approx. Size 50" x30"X17")

20 Gauge Steel Store Cupboard with Glass

door and Four Partition (Approx. Size 78"

310 1.00 x36"X18"),directed by Engg. in Nos 14200.00

Charge..(approve rate at L.G &SCL HOSPITAL

Notice Board with Glass Shutter (Size: 3.5' x

2" x 3"),directed by Engg. in Charge.(approve

311 1.00 rate at L.G &SCL HOSPITAL ) Nos 4450.00

Simple Soft Board with Cloth,directed by

312 5.00 Engg. in Charge.(approve rate at L.G &SCL Sq.ft 254.00

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (amc met/Hospital)