Providing Functional house hold tap (FHTC) connections in village Khor , Nigal, Anoh, Barla, Kohlari etc. through proposed LWSS Khor Nigal in Tehsil Fatehpur District Kangra under JAL JEEVAN MISSION

Amount

Excavation in foundation treanches(Pipe & Pits) up to all depths in all classification of earth work such as pick work,jumper work,saturated soil including bailing or pumping out water,blasting soft /hard rock where blasting is prohibited in all lifts including trimming & dressing of sides leveling of beds to correct grade i/c shoring/strutting planking,timbering & dewatering wherever required stacking the usable & unusable material/soil separately & after laying,jointing & testing of pipes,returning the useable soil in trenches in 15cm layers including consolidating of such deposited layer by raming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surface to its original condition & including cost of diversion for traffic,night signals,fixing caution boards,crossing over trenches for access to houses,fencing etc.completein all respects with in all leads & lifts as per directions of Engineer-in-Charge.

P/Laying and jointing in trenches to be levelled to grade, BIS marked GI flanged pipes confirming to BIS:1239 (latest with upto date ammendments) of Following specified diameters (Medium class) duly flanged after 5th pipe with intermediate butt welded joints including the cost of flanges, bends/short pieces made from parent tubes of diferent degrees cutting welding and jointing with flanges conforming to tables as specified below of BIS: 6392 (latest with upto date ammendments) welded at both ends as per BIS:816 (latest with upto date ammendments) with electrodes confirming to BIS 814 (latest with upto date ammendments) & provided with nuts and bolts BIS: 1369 (latest with upto date ammendments) of required sizes 4 mm thick champion make compressed asbestos fiber gasket or synthetic rubber gasket confirming to BIS:2712 (latest with upto date ammendments) & approved specifications as per site conditions including flushing, cleaning & hydraulic testing complete to the best satisfaction of Engineer-in-charge.

Stage-II

GMS pipe (Med. Class) 50 mm dia. Table-28

GMS pipe (Med. Class) 50 mm dia. Table-17.

Pumping Machinery (Centrifugal Pumping Machinery)

Stage-2nd from Node-2 to Node-5

Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting water of under mentioned charactristics with impellers of bronze/suitable alloy, priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade with cast iron casing coupled directly through a flexible coupling on a common C.I. / Cast steel base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB conforming to BIS: 325-1978 read read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below.

Total Head = 149.28 Mtrs.

Discharge required from each pump. = 1.65 lps

No. of pump required = 2.00 Set (One act as stand by)

Location of the site of installation of machinery :The site is located near Bharmar Railway station

The altitude of installation:390 MSL.

Type of current.AC three phase supply with freqduency of 75cycle per second.

Rate Voltage415V + 10%

Type of water and its source Clear water.

Shaft level 451

Level of discharge point 542

Static Head :451

Charactristics of water.

a)Ambient Temperature dig.c

b)Turbidity NTU

c)Hardness260Mg/Ltrs(as CaCO3)

e)Total solid Mg /Ltrs

f)Other

Depth of well assembly

No. of working hours per day 16.00Hours.

Length of Rising main 1540 Rmts.

Dia of Rising main 50 mm G.I. Pipe

Limit of pump operation.In the completem Range of (-)75% .

R.P.M. of pumping set.2900 RPM (or to be specified by the tenderer).

Test run. 8 Hours contineously for 7 days.

Providing & fixing Cast Iron double flanged sulice valve of Kirloskar /KSB/ Kilburn / BHEL/ Leader make of following dia and class PN- 1.6 capable of with standing nominal seat pressure of 16.00kg/Cm2. (as per IS -780-1984 latest with up to date ammendments if any) to be provided on delivery side) of size one step higher than the delivery size of pump complete in all respect as per diection and and satisfaction of engineer in charge . (Size of the valve to be specified by the tenderer )

Providing & fixing Cast Iron double flanged Reflux valve of Kirloskar /KSB/ Kilburn / BHEL/ Leader make of following dia and class PN- 1.6 capable of with standing nominal seat pressure of 16.00kg/Cm2. (as per IS -780-1984 latest with up to date ammendments if any) to be provided on delivery side) of size one step higher than the delivery size of pump complete in all respect as per diection and and satisfaction of engineer in charge . (Size of the valve to be specified by the tenderer )

Providing & fixing Cast Iron double flanged sulice valve of Kirloskar /KSB/ Kilburn / BHEL/ Leader make of following dia and class PN- 1.6 capable of with standing nominal seat pressure of 16.00kg/Cm2. (as per IS -780-1984 latest with up to date ammendments if any) to be provided on delivery side) of size one step higher than the delivery size of pump complete in all respect as per diection and and satisfaction of engineer in charge . 50 mm dia

Providing & laying PVC insulated jointless, flat water proof copper cable of Siemens/Finolex/Grandlay/Gloster make conforming to BIS:1554 (Part I) -1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles ,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost.

On supply side of 3½ core coper cable 4 mm^2 ( From HPSEB Meter to Switch & Starter).

On motor side 3 core flat joint less copper cable of size 2.5 mm^2 ( From Switch & Starter to Motor) pump installed in the bore.

Supply & errection of floor/wall mounted power shunt capacitor conforming to BIS 2834-1986 latest with upto date ammendments of GEC/Siemen/ Havells L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually of requirement KVAR according to BHP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including Standard/ L&T/Kilburn/Indo asian make ICTP switches conforming to BIS 4064- 4064-1978 or latest with HRC fuses. (range to be specified by the tenderer.)

Supply of standarad make 80 mm dia circular/square dial pressure gauge of suitable range Fiebeg/Bourden/ Precision make with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 latest with up to date ammendments.

Providing & Laying G.I./MSERW pipe considering site requirements and having appropriate size in accordance with the delivery size of pumping set . The pipe shall conform to relevant BIS codes & capable of with standing the feild test pressure equal to 1.5 times the operating pressure including all type of fittings such as bends, tapers/ reducers, flanges, rubber gaskets 3mmthick, nuts & bolts and any other fitting required at site and work shall be to the entire satisfaction of Engineer-in-Charge. The pipe material shall conform to relevant BIS Code and capable of with standing FTP equal to 1.5 times the operating pressure the complete arrangement shall compromise of

Suction Pipe XXX mm dia = to be specified by the Tenderer

Delivery pipe XXX mm dia = to be specified by the Tenderer

Common header = 125 mm dia

NOTE:- Actual laying to be done as per final drawings to be approved by the Engineer in charge

Providing and lying double loop earthing with coper plate 600x600 x3 thick electrode and copper strip of 25x3 complete including providing of material such as charcoal, common salt, GI pipes, thimbles, nuts & bolts, digging of pits, Copper /GI wire/ Strips of required capacity conforming to BIS 8034-1978 latest with upto date ammendments for above motor & other electriacl equipments including all civil works. (for both machineries).Note. The strip size shall be 20x3 upto 18.5 KW . 25x3 for 18.5 to 37 KW to 55 KW and 32x5 beyond 55 KW.

Errection of all equipments and making all kind of connections as per site requirement including cost of tees,flanges, bends tapers & any other fittings required as per site conditions & as per directions of Engineer-in-Charge.

A.K. Traders

sadeep kumar

Sarabjit Singh Katoch