Building Work

Sub work: Construction of Ground Floor Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Sand Filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, , sales and other taxes etc, hire charges of T & P and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for fnished item of work (APSS NO. 309 & 310) - Under Footings

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete and overheads & contractors profit for finished item of work. (APSS No. 402)

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc and overheads & contractors profit complete (BLD-CSTN-2-14) - Footings

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc and overheads & contractors profit complete (BLD-CSTN-2-14) - Pedestals

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc.and overheads & contractors profit complete (BLD-CSTN-2-14) Columns

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14) - Plinth Beam

Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard other than granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615) - Upto Basement

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position including soverhead charges & Contractors profit but exlcuding VAT and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) - Superstructure

Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14) - Lintels

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14) - Sun shades

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14) - Roof Beams

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14) - Roof Slab 125m thick

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials complete for finished item of work (APSS No. 901 & 903).(CSSR) for all Floors - Over Roof Slab

Ornamental plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work.(SS 901,903 & 904) for Ceiling Plastering.

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work .(SS 901,903 & 904)- Outside alround

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (SS 901,903 & 904) - Inside

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for internal walls - Inside

White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors - Inside Ceilings

Painting to new walls in two coats with Plastic Emulsion Paints Asian/ Berger/ Nerolac or equivelent and shaded over Priming Coat with Cement Primer water base interior Gr -1 or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc complete for finished item of work for internal walls.(APSS No.901 & 908) - Inside

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)-Outside alround

Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707.

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm.)BMT-P.80.B

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. BMT-P.56

Providing and fixing factory made Solid wood polymer Composite (WPC) single extruded door frame section of size 45x75mm. the two vertical members are to be joined togheter with the horizontal member using 8x50mm long MS Star full thread screws to be used with reverse forward speed control and drilling machine. The ready/ assembled door frame is fixed to the wall using hold fasts or bolt Fastenes. A minimum of 4Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member with encapsulation of 8mm rigid layer on all the six surfaces. the door framewill have a rebat of 32mm. etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Providing and fixing 28-30mm thick Solid wood Polymer composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an overall density of 750 kg/cum. it will be fixed to the frame using 100 mm long hinges including all labour charges etc., Complete for finished item of work.

Sub work: Water Supply and sanitation Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) - 110 mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) - 90 mm dia

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality confirming to IS:2556-Part-4:1972 with waste fittings like rubbe plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior / Nice / Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7mm PVC connection with brass union nut C.P. coated and concealed stop cock 12.7 mm (1/2") etc complete for 550 x 400 mm - Single C.P Pillar cock including Cost and and conveyance of all materials and labour charges including over heads and contractor's profit but excluding GST charges etc., complete for for finished item of work

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work for all floors

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supply and fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warrenty Chrome plated / Jupiter Aqua Lines-JAL-make Nira or equivalent series including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete

Supply and Transportation of 1 HP 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for 4" Bore well. Makes: As per list of recommended brands as category I

Sub work: Construction of Sump Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Sand Filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, , sales and other taxes etc, hire charges of T & P and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for fnished item of work (APSS NO. 309 & 310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, for finished item of work. (APSS No. 402)

Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thick mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Supply and placing of the Design Mix Concrete for M-25 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm size graded m/c hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all Material like cement, fine aggregate (sand) coarse aggregate, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. and overheads & contractors profit complete (BLD-CSTN-2-14)

Sub work: Providing Electrical Connections Supply and Fixing of 25mm outer dia medium grade (2.2 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in Roof Slabs with all required MS junction boxes and all accessories including masonary work for light, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete Makes : Precision/Universal & Marudhar/ VIP /GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and Fixing of 25mm outer dia medium grade (1.8 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete Makes : Precision/Universal & Marudhar/ VIP /GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS /HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable(Phase, Neutral & Earth) in existing pipe with 6A 1 way modular switch, Ceiling rose and 6 modular cover frame covering to 6 modular G.I Box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Makes: Wire=Finolex / RR kabel / Havells and Switch = GM-Zenova / Legrand Arteor / Schneider Zen celo / Goldmedal(i-Push).

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS /HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Finolex / RR kabel / Havells

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS /HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Finolex / RR kabel / Havells

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I including cost and conveyance of all materials and labour charges etc., complete.Makes: As per list of recommended brands as category I. 120 Sqmm x 3.50 core

Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size 1.5 x 0.6 x 0.9 m, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator with all standard accessories of makes Makes : Crompton HS Decora / Bajaj Regalstar / Havells Fusion 50 / Orient SummerCrown / Usha technix decorative

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply of fresh air exhaust fan of light duty 250V A.C.50Hz.. 225 mm (9") / 300mm size (12") 1350 R.P.M fan with wire guard etc., complete. of makes Crompton / Bajaj Bahar WG /Havells Ventil Air-DB / Orient hill air. Including cost and conveyance of all materials and labour charges etc., complete.

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing andbatten light with extruded alluminium housing and batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Voltswith PF>0.9, Surge protection: 2KV,THD<15%, withinbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI>70, .etc., complete.Makes : Surya /C&S/ Fortune Art / Syska / Enrich /Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/Orbit/Panasonic/Trinic/Lumenb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA

Supply, transportation and fixing of of 30W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having efficacy >120 lumines/watt, System efficacy >95lm/W and junction temprature < 70°C, with Ingrees protection IP65, IK05, Driver surge protection 4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : PHILIPS / GE /CROMPTON / BAJAJ / VIN / HAVELLS / RENESOLA. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply of LED Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base. Makes: As per list of recommended brands.

Supply of 1.50 T.INVERTER Model Cool type split AC unit with high wallmounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation