Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹79,215Accepted-AOC | 1 | Accepted-AOC Accepted | |
| 2 | 2₹87,532.92+₹403.92 (0.46%)Rejected-AOC | 2 | Rejected-AOC Accepted |
Tender Value
₹79,215
EMD Value
₹2,000
Closing Date
26 Nov 2022, 5:00 pmClosed
Assistant Executive Engineer
Minor Irrigation Sub Division, Aranmula
GENERAL-Annual Maintenance Mechanical Works-Annual Maintenance to pump motor and accessories to Ikkadu LI Scheme for the year 2022-23-General Mechanical works
2022_Irrig_531252_1
IRR/IA/TR/4952/2022_16_1_1/2
Open Tender
Civil Works - Others
Item Rate
180 days
Aranmula
Please see the tender documents
7 documents required · 7 mandatory
₹555
Yes
₹2,000
Yes
13 Jan 2023
19 Nov 2022
28 Nov 2022
19 Nov 2022
26 Nov 2022
19 Nov 2022
Amount
Repairs of Pump and accessories
OD9241/2022-2023: Charges for Dismantling motor and pump from Base plate for 1 no 30 hp motor,1 no 5 Hp vacuum pump and other related accessories from LI Station and conveyed to work shop with the help of chain block, wire sling,coir rope etc. complete as directed by departmental officers at site.Code Description
OD9242/2022-2023:Dismantling Suction and Delivery pipe, bend etc from pipe line and lift pipe line and clearing and washing slurry from pipe and re setting the Suction and Delivery pipe to lines and level with the help of chain block, vadam, wire sling etc.
OD9243/2022-2023:Dismantling and Overhauling sluice valve from pipe line including dismantling,overhauling and resetting the same etc complete.
OD22839/2022-2023:Overhauling existing one 30 hp motor, separate the stator and rotor, remove the dust, cleaning with petrol, varnishing the winding with best quality varnish, heating, greasing the bearing, assembling and refitting the same and conducting test run etc complete as per directions of departmental officers at site
OD9245/2022-2023:overhauling existing old oil immersing starter, drain out the oil, cleaning the contacts with kerosene oil, replace the damaged O.C.B()il circuit breaker) contacts including magnetic coil, testing the trial run etc complete
OD9246/2022-2023:Charges for checking 100 Amps main switch, including attending minor repairs such as levelling the leg of unit, cleaning the contacts etc. complete.
OD22840/2022-2023:Charges for dismantling bearing welding and levelling the shaft fabricating and fixing gun metal shaft bush safely with hydraulic press andremachining,greasing the bearing overhauling,assembling,conducting test run etc complete
OD9248/2022-2023:Charges for erecting 1 no 30 Hp motor with corresponding pump and other accessories in correct alignment on bed including providing electric connections and trial running etc complete.
OD9249/2022-2023:Charges for resetting the vaccum pump on correct alignment, including renewing damaged pipe refixing the valve, checking the joints etc complete.
OD9251/2022-2023:Supplying Good quality nut bolt and washer
OD9252/2022-2023:Supplying 16m2 copper wire
OD9253/2022-2023:Supplying and providing 12 mm Gland Packing
OD9254/2022-2023:Supplying bearing Grease
OD9256/2022-2023:Supplying Banian Waste
OD9257/2022-2023:Supplying Rubber bush
OD9258/2022-2023:Supplying GM Shaft bush
OD9259/2022-2023:Supplying Oil Seal
OD9260/2022-2023:Supplying Water seal
OD9261/2022-2023:Charges for lift up motor, vacuum pump and all related accessories from ground floor to upper floor safely with the help of chain block,coir rope etc complete, when pumping season is over and as directed by the deptl. officers at site
10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
Prakashkumar R
Bidder Name
Prakashkumar R
R K BABU
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_769165.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .