Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹92.7 L
EMD Value
₹1.9 L
Closing Date
18 Nov 2026, 12:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
23 conditions · 12 needing a document upload
Financial Eligibility Criteria Criteria (Para-10.2 (Pt-I) of GCC April 2022):The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per AnnexureVIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Definition of similar work: "(1) Erection of LT or above voltage level distribution panels. O r (2) Erection and commissioning of LT or above voltage level line (overhead or underground) Or (3) Electrification / Rewiring service buildings, bungalows and quarters. Or (4) Supply and erection of tower light. Or (5) Lighting of station / Administrative building / Circulating area. "Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).
(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components.
(b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).
Contractors should have valid electrical contractors license for the required voltage level or above the required voltage level issued from any state/Central government licensing board. The intended participant shall upload the valid Electrical contractor's license along with the offer/tender as credential.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Regarding technical and financial eligibility criteria, scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer.
Scanned copies of documents in support of formation/registration of the company/firm/legal authorization of the person to deal with the tender/notarized/registered copies of the documents wherever required as per tender conditions are to be submitted along with offer.
If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials.
During the execution of work, all materials brought to site by the Contractor must be offered for inspection within advance notice of one month prior to actual date of inspection. Inspection of materials will generally be done by RITES. If volume of material of nature does not fall in the category of RITES inspection, then inspection of material will be done on the basis of MTC & GC ( Manufacturer's TC & GC ). All site acceptance of material must be maintained in one material receipt & issue Register which may be verified by any agency at any time
7 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
If a tender is accepted on the quoted rates of bidder which is below the advertised tender value , an additional performance security shall be submitted by the bidder as per Para 16(4)(h) regarding Performance Guarantee mentioned in Tender document
Electrification of newly constructed Type -IV (02 units), Type -III (04units) Qtrs.,additional work in ORH with associated work of power supply arrangement at JHAJHA and any other location under Dy.CEE/Con/S/MHX.
EL-C-S-MHX-ETEN-06-26-27~ECR
EL-C-S-MHX-ETEN-06-26-27
Open
Works - General
12 Months
Purbi Champaran, Bihar
₹0
₹1.9 L
23 Oct 2026
23 Oct 2026
4 Nov 2026
113 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 92,72,887.75 | ||
| — | 645.00 | — | — | ||
| Wiring for light point call bell, fan point/exaust fan point and 5 A plug point in a concealed with n heavy gauge PVC conduit pipe confirming to IS 9537 (pt.3)/1983 or latest, ISI mark with single core 1.5 Sqmm copper FRLS wire (make - Anchor, Finolex. Havells, KEI, Natural White, Polycab) complete withcontrolling modular switches and suitable board of Legrand,Siemens, L&T, Anchor, Natural White,Benlo, ABB, Havells, Crabtree make and 16 SWG tinned copper wire as ECC Each | — | — | — | 3,27,660 | |
| — | 1200.00 | — | — | ||
| Wiring of sub-main in concealed heavy gauge PVC conduit pipe complete with PVC insulated 2x2.5 Sqmm FRLS copper wire (make - Anchor, Finolex, Polycab, Natural White, KEI, Benlo) from main board to sub distribution board for light and fan & power plug circuits with ECC 16 SWG copper wire etc. | — | — | — | 70,956 | |
| — | 600.00 | — | — | ||
| Wiring of sub-main in concealed heavy gauge PVC conduit pipe complete with PVC insulated 2x4 Sqmm FRLS copper wire (make - Anchor, Finolex, Polycab, Natural White, KEI, Benlo) from main board to sub distribution board for light and fan & power plug circuits with ECC 16 SWG copper wire etc. | — | — | — | 76,320 | |
| — | 300.00 | — | — | ||
| Wiring of sub main in concealed heavy gauge PVC conduit pipe complete with PVC insulated 2 x 6 Sqmm FRLS copper wire (make - Anchor, Finolex, Polycab, KEI, Natural White, Benlo) from main distribution board to sub distribution board with ECC 16 SWG copper wire etc. | — | — | — | 38,136 | |
| — | 150.00 | — | — | ||
| Wiring of sub main in concealed heavy gauge PVC conduit pipe complete with PVC insulated 2 x 10 Sqmm FRLS copper wire (make - Anchor, Finolex, Polycab, KEI, Natural White,Benlo) from main distribution board to sub distribution board with ECC 16 SWG copper wire etc. | — | — | — | 21,454.5 | |
| — | 80.00 | — | — | ||
| Supply and fixing of 16/20 Amp Modular switch & socket, Make- Benlo, Legrand , ABB, Havells, Anchor , Roma, C&S, Natural Whlte,or similar ISI make approved by competent authority. | — | — | — | 22,866.4 | |
| — | 120.00 | — | — | ||
| Supply and fixing of 5 pin 5 Amp Modular switch & socket, Make- Benlo, Legrand , ABB, Havells, Anchor , Roma, C&S, Natural White or similar ISI make approved by competent authority. | — | — | — | 39,217.2 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 4 pole MCCB JOOA with enclosure. Make - L&T, Siemens, Hager, Legrand (MOS), ABB, Schneider Natural White, & Benlo. | — | — | — | 71,690 | |
| — | 10.00 | — | — | ||
| Supply, fixing, connection & testing of 4 ways TPN MC8 DBwith 4 pole isolator 63A. One no. & 6/16A MCB single pole 12 nos. with sheet metal enclosed type board complete withall with sheet metal enclosed type board complete with allaccessories etc. | — | — | — | 44,299.8 | |
| — | 25.00 | — | — | ||
| Installation, connection, testing and commissioning of one no. Double pole, Rating 16-25 Amp. ELCB/RCCB on Concealed suitable size PVC board having top cover hylem sheet (thickness not less than 3mm) including supply of ELCB/RCCB, PVC board, hylem sheet, PVC cover cable (not less than 10 sq.mm) for connection with required material for installation and connection as per instruction of site incharge. Board make . Cany or similar , ELCB make Havells, Benlo, Legrand, L&T, Anchor. | — | — | — | 74,925 | |
| — | 8.00 | — | — | ||
| Supply, fabrication and fixing of G.I. channel/angle of the required sizes including fastener. | — | — | — | 945.84 | |
| — | 110.00 | — | — | ||
| Supply, Fixing and commissioning of A.C. Celling fan 1200/1400 mm sweep ( 5star rated) including supply of copper leads along with supply & fixing of electronic regulatorcomplete etc. as required.(make Bajaj/Usha/Crompton/havells,Philips,GM,Benlo. | — | — | — | 2,56,514.5 | |
| — | 25.00 | — | — | ||
| Supply fixing connection & testing of Exhaust fan 300 mm sweep complete with all accessories, including cutting of wall and making good the damages. Make - Usha, Khaitan ,Polar ,Orient, Bajaj, C.G or similar ISi marked | — | — | — | 19,952.75 | |
| — | 20.00 | — | — | ||
| Supply, fixing testing & commissioning of wallmounting bracket fan 16" sweep make- Khetan/Polar/ Usha/ Hawells/Benlo | — | — | — | 36,527 | |
| — | 8.00 | — | — | ||
| Supply, fixing, connection, testing and commissioning of Airciculating wall mounting bracket Industrial type fan 600 mm sweep make Power Vent.IE PC or approved ISI mark with fixing up at suitable height with foundation bolt of size 300 mm longx12 mm dia. complete | — | — | — | 97,878.88 | |
| — | 140.00 | — | — | ||
| Supply , fixing & testing of 40 watt LED (LINEA LED PRIME) fitting with tube as per Bajaj cat no BICDPE 40W LED( product no 169602) Make: Bajaj,Havells, Benlo or similar | — | — | — | 6,85,965 | |
| — | 10.00 | — | — | ||
| Supply and fixing of corgated PVC flexible pipe of size 1"/3/4" dia from existing cable connection main switch for cable loop protection. | — | — | — | 90 | |
| — | 30.00 | — | — | ||
| Supply & erection of earthing station as per CEE/CCC's specification with GI earth electrode ,50mm dia and 3m long medium gauge TATA/JINDAL make G.I. pipe brackets at both ends and provided with alternate layer of charcoal and salt in the pit and connection with 6 SWG, G.I. wire from earth electrode to rail pole/DB of Quarter along with masonry work encasing the pit. | — | — | — | 60,106.2 | |
| — | 1800.00 | — | — | ||
| Laying of cable {4+1(spare) to be layed for single core cable} partly through trench at a depth of 1m and filling with sand, brick work or under the road by laying of G.1./HDPE pipe at depth of not less than 1m or either in existing masonary trench or on cable tray or fixed on wall/post with suitable MS flat 35x6mm clamp and saddle including supplying and fixing suitable end termination with cable gland and aluminium lugs wherever required as per instruction of enginer -In- Charge, and refilling with earth etc. complete as required.(Cable supplied by Rly.} | — | — | — | 2,37,204 | |
| — | 14.00 | — | — | ||
| Supply lnstallation of l Five star Rating) 25 Ltr capacity Gyser of plastic Body Make :Usha, Bajaj, Benlo, Symphony ,Havells | — | — | — | 1,24,839.96 | |
| — | 12.00 | — | — | ||
| Supply and installation of non -inverter type 2 Ton split AC machine with all accessories and spares. Accepted make and brand Make -VOLTAS, CARRIER, HITACHI, LG, LLOYD | — | — | — | 9,08,160 | |
| — | 12.00 | — | — | ||
| Supply and delivery of outdoor unit stand suitable for split AC. | — | — | — | 7,163.28 | |
| — | 12.00 | — | — | ||
| Supply of automatic relay type single phase ,voltage stabilizer 5KVA cap With delay timer 1-2 min high low cut off. Input voltage 130-280 volt. | — | — | — | 82,200 | |
| — | 12.00 | — | — | ||
| Fix. & comm. Of 5kVA stabilizer. | — | — | — | 1,842.24 | |
| — | 110.00 | — | — | ||
| Supply and delivery of Finolex/Anchor/Benlo/ Polycab make Submersible cable of 3 core 16 sq mm, 600 V including connection with pump, motor , pannel. | — | — | — | 1,00,614.8 | |
| — | 2.00 | — | — | ||
| Supply and delivery at site, (12.5 HP)15000 GPH x 46 mtrs head submersible pump set complete with coupled motor of appropriate size suitable for operation in AC supply 3 phase 50Hz,415V(±5 to 10%) including wiring and connection of pump set. | — | — | — | 4,98,406.88 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of the above 15000 GPH pump set. | — | — | — | 67,194.64 | |
| — | 2.00 | — | — | ||
| Supply, fixing, connection, testing & commissioning of automatic star delta starter(confirms to IS 13947-4) 35 HP suitable for above pump, 415V,3 phase motor as per Havells type ASDSE2GO AND cat. No. PASD2GOO. (Make: Havells, L&T or similar) | — | — | — | 40,456.08 | |
| — | 160.00 | — | — | ||
| Supply & Installation of black steel pipe 'B' class (TATA/JINDAL) 4" dia. with ( Socket or flenged) as per requirement. | — | — | — | 66,841.6 | |
| — | 2.00 | — | — | ||
| Supply and fixing of sluice valve ISi mark 4" dia. | — | — | — | 12,418.42 | |
| — | 2.00 | — | — | ||
| Supply and fixing of clamp 4" dia suitable for above pump with nuts & bolts. | — | — | — | 4,714.08 | |
| — | 1.00 | — | — | ||
| "Supply, installation, testing & commissioning of floor mounted cubical type 'G' Frame MCCB's Distribution Panel Board conforms to IS 8623, IEC 439 complete with 400 A copper busbar consisting the followings: (a)'G' frame Panel Board of 400 A rating, 'CN'frame MCCB having 8 nos. of outgoing ways.(Havell's new cat. No. LPBG 040008)(b)Incoming;(i)400A,(WSN)-MCCB- 1no(Havell's new cat no.LCNF0400) (ii)Cable alley :2x8way(Havell's cat. No. LPBZCBLA 08)(iii)Digital voltmeter (0-500V) with selector switch-1 no.(Havell's cat. no. LBPZMTRD00)(iv)Digital ammeter (0- 400A) with selector switch -1 no.(Havell's cat no.LBPZMTRD00)(v)L.E.D. indication lamp (R.Y.B.)-3 nos.(c) Outgoing:(i)100A 4 pole (WSN) MCCB-2nos.(Havell's new cat no. LANF0100)(ii)63A 4 pole(WSN) MCCB-6nos.(Havell's new cat no. LANF0063)(MCCB Make :Havell's /EE/L&T or similar )" | — | — | — | 1,55,537.7 | |
| — | 20.00 | — | — | ||
| Supply of Multi compressor (Rotary/Scroll) outdoor units with condenser unit, fan unit, piping, wiring, connections, control relay units, capacitors, insulated copper piping for condensed gas and liquid suction and delivery copper pipe lines (indoor to outdoor). refrigerant gas pipe joints and multiooting joints, XLPE insulated copper power cables of suitable sizes for connection with the power panel etc suitable for reversible cycle operations (Heating & Cooling) and filtered fresh air handling/supply system including ducting etc as required for different air conditioners areas. Make LG, Daikin, Bluestar, Hitachi. Here qty. Unit Job stands for TR. | — | — | — | 8,74,900 | |
| — | 10.00 | — | — | ||
| Supply of 2 Tr Hi-wall indoor units suitable for reversible cycle operation. Make: LG, Daikin, Bluestar, Hitachi. | — | — | — | 3,30,340 | |
| — | 20.00 | — | — | ||
| installation, testing and commissioning of Multi compressor (Rotary/Scroll) outdoor units witl1 condenser unit, fan unit, piping, wiring, connections, control relay units, capacitors, insulated copper piping for condensed gas and liquid suction and delivery copper pipe lines (indoor to outdoor) refrigerant gas pipe joints and multiooting joints, XLPE insulated copper power cables of suitable sizes for connection with the power panel etc suitable for reversible cycle operations (Heating & Cooling) and filtered fresh air handling/ Supply system including ducting etc as required for different air conditioners areas. Make LG, Daikin, Bluestar, Hitachi. Here qty. Unit Job stands for TR. | — | — | — | 80,900 | |
| — | 10.00 | — | — | ||
| Installation, testing and commissioning of Hi-wall indoor units suitable for reversible cycle operation. Make LG, Daikin, Bluestar,Hitachi. | — | — | — | 20,220 | |
| — | 12.00 | — | — | ||
| Supply and fixing of PVC drain pipe of 25 MM dia with 6 mm thick nitrite Rubber Insulation tube. Here qty. Unit RM stands for RMT.(1 metre = 1 Root metre). | — | — | — | 2,088 | |
| — | 10.00 | — | — | ||
| Supply and fabrication of MS angle of suitable size for outdoor unit stand with red- oxide paint 2 layers) and enan1elpaints (2 layers). | — | — | — | 1,010 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing and commissioning of power cable for electric supply to panel for indoor units & outdoor units (plant AC). Here qty. Unit RM stands for RMT (1 metre = 1 root metre). | — | — | — | 4,608 | |
| — | 12.00 | — | — | ||
| Supply and installation of communication cable. Here qty. Unit RM stands for RMT. (1 metre = 1 root metre). | — | — | — | 2,064 | |
| — | 50.00 | — | — | ||
| Wiring of sub-main concealed in PVC heavy guage conduit pipe of size (O.D.) 20 mm make- Malhotra or similar ISI make Finolex, Benlo, Natural White, KEI or polycab with ECC 16 SWG/01 sqmm multi polycab with ECC 16 SWG/01 sqmm multi strand single core flexible copper earth wire. In case of ceiling/beam/column where cutting is not allowed/possible wiring to be done in open conduit/ casing capping by use of drill & roll plug. | — | — | — | 9,300 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of modular AC box with MCB with matching galvanized iron frame and polycarbonate cover plate accommodating 3 module (1x1x3M)suitable for 230, 50 Hz supply Make- Legrand, Havells, Crabtree, Wipro,Cona, Anchor, L&T or equivalent as per IS & IE rules. | — | — | — | 5,230 | |
| — | 1.00 | — | — | ||
| Supply and fixing of 4-way TPN double door MCB DB with 4 pole isolator 80 Amp one no. And 32 Amp 12 Nos. MCB SP with sheet metal enclosed type steel cover with all accessories Make- Legrand, ABB, Siemens or similar. | — | — | — | 7,003 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of 12.5 Mt. Hot dip Galvanized suitable for wind velocity of 44 M/Sec as per IS 875 Part 3 1987 latest version High Mast system alongwith head frame, steel wire rope, double drum winch , galvanized lantern carriage suitable for 6 luminaries & its CG boxes & lightning finial, integral type high powered reversible power tool for raising and lowering of lantern carriage, gear box coupled with the winch & torque limiter , foundation bolt of special steel with nuts washers, anchor plates , templates , LED beam flood light luminaries 200 W , shallow fundation considering the .Double drum/350 Kg winch having gear 53:1 , oil bath (SAE90/140) arrangement . (4) 02 nos. stainless steel wire ropes 5 mm dia (7/19) breaking load capacity 1450 kg x 2 Integral power tool 3- phase , 0.75 HP 2mm/min single speed winch, galvanized lantern carnage suitable for 6 luminaries & its CG boxes & lightning final integral type high powered red reversibile revers power tool for raising and lowering of lantern carriage, gear box coupled with the winch & torque miter foundatios bolt of special steel with nuts washers, anchor plates, templates, LED beam food light luminaries 200 W, shallow Foundation considering the safe soil bearing capacity at site as 10 T/Sq Mtr at 2 mtr depth , twin dome aviation obstruction light heavy gauge hot Dipped galvanized lghting finals, Feeder Panel comprising main Incoming switch MCB', time switch, contactor reversing starter and protective system etc . as required and mainteanance free Earthing etc.Make -Bajaj,Transrail,Phillips, Crompton, Surya.Valmount. | — | — | — | 3,29,878 | |
| — | 25.00 | — | — | ||
| Supply, delivery & Fixing of octagonal pole hot Dip Galvanized in single dip average 70 micron DFT, designed for maximum wind speed of 169KM/Hr.,BOP-7030 type pole of 6 m long, top dia 70mm, bottom dia. 130mm sheet thickness 3mm, in single section with Base plate (220x220x12)mm (LxBxT) with 4x20mm dia. 700mm long with 100mm projection foundation bolt complete with smart pack junction box with bakelite sheet, 6A MCB & stud terminals (for mounting inside base component of pole) and internal wiring for terminal to fitting with 2x2.5 sq.mm cable including single arm 1 mtr. long suitable for 3 to 10 mtr. pole of reputed make. Make - Bajaj, Transrail, Bansal, Jindal, Gammon Group. | — | — | — | 2,97,500 | |
| — | 25.00 | — | — | ||
| Making of foundation suitable for 3 to 8 mtrs. octagonal pole as per site incharge/4'X4'X4'manufacturer dimension & as per site requirement. | — | — | — | 1,44,575 | |
| — | 25.00 | — | — | ||
| Supply of (out door) 90 W LED street light luminaire made of pressure die cast aluminium housing LED street light luminaires with IP66, with five year warranty Surya Product Code- SLE UL 45 W IP66 LXN.Make of luminaire & Tube- Philips, Surya, Bajaj,Benlo, Crompton Greaves.Warrenty/Guarantee 05 Years from date of installation. | — | — | — | 3,54,325 | |
| — | 80.00 | — | — | ||
| Supply, fixing,testing and commissioning of LED deep recessed down lighter, housing aluminum die cast, white powder coated and PMMA diffuser having system wattage less than or equal to 15 Watt complete with all mounting arrangement, accessories complete of make Phillips,Bajaj, Havells .ABB.BENLO Warrenty 05 Years from the date of installation. | — | — | — | 1,33,040 | |
| — | 1.00 | — | — | ||
| Supply of water cooler 150 lit./Hr. cap. Storage cap. 150 ltrs. | — | — | — | 44,900 | |
| — | 1.00 | — | — | ||
| Supply, Installation testing and commissioning of online UPS having 5 KVA capacity with suitable 2 SMF battery set, single phase input & single-phase output, Output shall be 230V, 50Hz pure sine wave, Battery rating shall be- 12V, 42AH (16 Nos.) Backup shall be minimum-60 Minutes, Rack shall be provided with battery. Warranty (onsite comprehensive warranty) for UPS shall be 5 Years & for Battery 2 years replacement warranty. (Warranty Period: Upto 60 months from the date of supply) (Warranty Period : Upto 60 months from the date of delivery.) | — | — | — | 1,13,752 | |
| — | 30.00 | — | — | ||
| Supply & delivery and Installation of 2x2 surface mounted luminaires which provides soft light and glare free symmetrical illumination.PLANOSUR2X2PLS 36w led 865G2S . Make:- Havells,C&S,Bajaj,BENLO, Oreva or similar.Warrenty 05 Years from the date of installation. | — | — | — | 2,10,600 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connection,testing and commissioing of LED fitting indoor type System wattage 20 W, IP 65 or better, deriving its name from the Nothern lights that make the sky look magnificent,Auora plus lights up your home with utmost glamour it deserves.3-in-1 color modes make it even more versatile. LED used in fittings should be of Make: NICHIA/ OSRAM/SEOUL/CREE/ PHILIPS LUMILEDS/ LEDNIUM with warranty period of 5 Yrs from date of commissioning or 6 Yrs from date of supply whichever is earlier complete with fixing arrangement.(dressing , mirror etc. light)Make: Philips, Bajaj, Havells, Syska. | — | — | — | 4,320 | |
| — | 25.00 | — | — | ||
| "Supply, erection, testing, commissioning, transportation to erection site with construction of foundation as per manufacturers design of 6 mtr height single arm ornamental decorative hot dip galvanized (80 microns)pole having cast aluminium arm. The rate also includes supply, erection, testing and commissioning of 1 nos 80W LED Post top lantern fitting having spun aluminum housing for lamp and reflector assembly with clear Polycarbonate cover and IP 65 Protection similar to Tear drop model of bajaj. The foundation including cable entry/exit arrangement with suitable 63mm dia flexible PVC pipe shall be done by the firm. The pole shall be painted with 2 coats of PU paint of reputed make. And shall be inbuilt junction box inside the pole with busbar of suitable size and MCB, the three core copper cable of 1.5 sq.mm size of Anchor/Polycab/Finolex/ RR Kable/Havells/KEI shall also be provided for connection of the LED fittings. Make- GOLDWYN or PHILLIPS or JAQUAR or WIPRO or PANASONIC or Bajaj or Havells or similar of any reputed make. " | — | — | — | 8,55,000 | |
| — | 800.00 | — | — | ||
| Supply & delivery at site of PVC insulated (Heavy duty) 4 core 25 sq mm 1100 volt grade armoured Al cable as per IS:1554 (part-I) .(Make: Gloster/Crystal/ Natural White/Polycab /Havel | — | — | — | 1,84,184 | |
| — | 700.00 | — | — | ||
| Supply and delivery at site of PVC insulated (Heavy duty of 4 core,120 sqmm ,650/1100V PVC/XLPE insulated ,armored alluminium conductor cable(Make: Gloster/Crystal/ Havells/RR Kabel/Mescab/Natural White/Polycab/ MPCab or simillar ISI marked IS 7098(Pt.I)/1988. | — | — | — | 7,50,645 | |
| — | 300.00 | — | — | ||
| Supply and delivery at site of PVC insulated (Heavy duty) of 4 Core, 185 mm², 1100V PVC/ XLPE insulated, armored Aluminium conductor cable.(Make: Gloster, Crystal ,Havells,Natural White, M cab or approved by competent authority. | — | — | — | 2,59,407 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
GCC2022UpdateduptoACS-7.pdf
ATTACHMENT
GCCACS8.pdf
ATTACHMENT
GCCACS9.pdf
ATTACHMENT
GCCACS10.pdf
ATTACHMENT
GCCACS11_11zon.pdf
ATTACHMENT
TenderdocumentETEN06-26-271.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .