GE/KHU-34/2025-26 PROVN OF HARD-STANDING AT SHOPPING COMPLEX, SPL REPAIR TO BLDG NO T-32 MOTIVATION HALL /RECREATION ROOM AND SPL REPAIR BLDG NO T-17 OFFICERS MESS IN THE AOR OF AGE B/R-1 UNDER GE KHUMBATHANG

Amount

M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) laid in floor, sub base in alternative panels finish cement concrete surface even and smooth without using extra cement.

M&L for sand filling under floors including watering and consolidation to receive interlocking tiles complete all as specified and as directed.

M&L for 80mm thick M-40 grade machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 all as specified and directed.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) in roof kerbs or mud stops,rounded or chamfered on edges,copings,kneelers,apex stones,bed plates,between kerb stone and tiles all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and directed.

M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M& L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete

M & L fo 2nd class soft wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class soft wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class soft wood timber scantling plain fillets. square, rectangular or triangular in section area notb exc 3 sqcm , clean sawn, secured with nails or brads complete.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws as specified..

M&L for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. Light shade over and incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in padding complete all as specified and directed.

Taking down of unserviceable steel windows with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and directed.

S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07

S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07

Mild steel squar bar 10 mm dia and over,cut to length, bent to shape required, including cranking, fit to window , bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

M&L for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

M&L 75 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply & fixed in repairs stainless steel curtain rod powder coated with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.

M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applyingapplying one coats of synthetic enamel paint complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S& F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

Demolition of brick work or stone/ boulder/PCC block masonry, built in cement mortar including all quoins, pillars etc.complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L for Joist, channel, angle, or tee sections,Fe-410- W(Gde?E-250)quality fixed independently, with or without connecting plates,in roof,wall etc all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thick over&including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete .

M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry, pointed,in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles coloured (350 x 250 x 7/450x350/300x450x7 to 8mm thick) on walls,incl highlighter tiles as if reqd set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces with CM (1:4) complete all as specified and directed.

M&L for wooden floor tiles of size 1200 x 200 mm and 7 mm thick with dove tailed joints laid over 150 Micron polythene film and 3mm thick foam as per manufacturers instructions including taking down of old wooden flooring any type and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-charge, complete.

Taking down shutters of any description exc 1 sqm but n.exc 2sqm each and refixing in same opening after adjesting or easing complete all as specified and directed by Engr in charge

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed.

Ditto as per item No. 13 but without glazing bars

Framed work such as grills grating etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointedwithgalvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Hacking out old broken glass (any thickness, size, quality) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware:[casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) complete all as specified and directed.

S&F 5 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane.

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge

S&F Factory made PVC moulded door shutter with particle board core,28 to 30mm thick(stIles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam colour PVC sheet on back face supplying and fixing in frame at site as per specification and specified by Engr-In-charge

S & F brass barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt)

S & F brass sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.(250mm length of bolt)

S & F butt hinges heavy weight cold rolled stainless steel and fixed (100mm)

S & F brass handles, (150mm) complete all as specified.

M&L for .Pre-cast cement concrete block masonry type C-1 1:3:6 (using 16mm graded stone aggregate) with solid blocks exc. 10 cm in width and setting in mortar 1:6 , complete all as specified and directed.

Taking down cement plaster on brick or concrete wall etc including racking out joints hocking for key scrubbing down with water etc.

M&L Rendering 15 mm thick on fair faces(both face) of brick work or concrete surfaces in CM 1:4 with WPC is to be finished even and smooth (with out using extra cement) complete all as directed

M&L for preparing of new plastered surfaces and applying two coats of cement based paint over a coat of primer on walls all as specified & directed by the Engr-in-Charge.

M&L preparation of new surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer, white or tinted over 1.5mm thick wall care putty all as specified & directed by the Engr-in-Charge.

M&L preparing new or previously untreated iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed by the Engr-in-Charge.

Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

S&F 25mm outer dia, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. all as specified

S&F 20mm outer dia, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. all as specified

M&L for reinforced cement concrete type B-1,1:2:4 (using 20mm graded aggregate) as in slabs supported on walls complete all as specified and directed

Formwork to soffits of suspendedslabs such as roof slabs, floorslabs, landings,sides of slab and similar work;not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia and over., cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L for18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars,cills,cooking platforms,counter top WHB including cutting and like over and including in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade all as specified.

Supply and fix in repair vitreous china ware counter top wash hand basin 410mm x 365 mm x185mm size incl waste fitting as per manufacturers specification complete and making good all connections in repairs complete all as directed by the Engr-in-Charge. Make: Parryware cat part No C0462 or equivalent as spproved by GE

S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

S&F in repair 15 mm bore high neck piller cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. Make : Parryware cat part No T4264A1 or equivalent as approved by GE

S&F repair Bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed Make:Parryware cat part No G4005A1 or equivalent as approved by GE

S&F 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make:Parryware cat part No G4707A1 or equivalent as approved by GE

Supply and fix PVC connection15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair Vitreous china urinal,white size 380x400x590mm including spreader complete all as specified. Make : Parryware Cat No :C0583(Combo set) or equivalent

S&F in repairs rim less syphonic vaccume western floor mounted water closet pan (Single piece suit),of size 740x350x660mm white incl seat cover as per manufacturers specification complete all as specified and directed. Make:Parryware cat part No:C8901/C8902 or equivalent as approved by GE

S&F in repair Towel Rack 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed. Make:Parryware cat part No T6008A1 or equivalent as approved by GE

S&F Toilet paper holder with cover Make:Parryware cat part No T6514A1 or equivalent as approved by GE

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Two way bib cock chromium plated fancy type Make:Parryware cat part No G2381A1 or equivalent as approved by GE

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S &F 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 75mm bore PVC(SWR) bend all as specified and directed.

S &F110mm bore PVC(SWR) bend all as specified and directed.

E/M Portion

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

One light point/ one fan point/ Bell Point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

Supply switch piano flush type single pole one way 5 Amps all as specified

Supply switch socket combination multi purpose, 5 amp all as specified

S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked

All as per item No 2 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified.

S & F switch socket combination switch socket outlet 3 pin, 16 amp flush type

S&F wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.

S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt drivers with high efficiency PMMA diffuser soft glare free light complete suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size all as specified and directed.

Suply and fix Track mounted LED light with modern design, campact size with High power COB LED to provide Focussed light 10 W. Complete all asa specified and directed .. (Make :- Havells/ Bajaj/CG)

S&F in replacement sheet metal enclosures distribution boards,double door 4 way three phase 415 volts MCCB,ISOLATOR&MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB 4 Pole 100 AMPS AC 415 V 25 KA=01 NO as incoming & outgoing MCB SP-12 No 10-16 AMP (Note :- (i)The DB shall be of VTPN series (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply and fix sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed.

Supply and fix for miniature Circuit breaker (MCB) single pole and current carrying caoacity 5 to 32 Amp 240 volt 'C' curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) single pole & neutral 240 volt 'C' curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

S&F two single core 6 sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil all as specified.

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as directed.

M&L for stone dust sand cushioning to UG cable laid in trenches all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover, class HV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core.

Supply, fixing, connecting and testing LED Bollards 8 watt for pathways and garden are made with aluminium extrusion for sturdiness and better finish UV stapilized injection moulded opa; polycarbonate diffuser for spot- free lighting and IP65 degree of protection including foundation complete all as specified and directed. .

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core.

Deduct Credit for Demolished/Dismantled material Rs (-) 26401.26 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S MOHD HASSAN (BID ID -3313774)

M/S TRADE LINK (BID ID -3314860)

M/S MOHD HUSSAIN (BID ID -3313678)

M/S SHABIR HUSSAIN (BID ID -3315212)

HUSNIA BANOO (BID ID -3315208)

M/S Ghulam Mustafa (BID ID -3315457)

M/S Hussani Enterprises Kargil (BID ID -3315108)