REPAIR REPLACEMENT OF ROOF SHEET FALSE CEILING AND OTHER CONNECTED ITEMS AT OTM MARRIED ACCN BLDGS AT LANSDOWNE

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed .

Dismantling of timber scantling 40 sqcm and above in section in any position, unframed work complete all as specified and directed

Dismantling of timber scantling in fillets rafters, purlins etc under 40 sqcm in section complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 2nd class hard wood (Sal) as in scantling, timber framed and fixed, clean sawn, complete all as specified and directed.

S&F 2nd class soft wood (Chir) as in plain fillets square, rectangular or triangular in sec clean sawn with nails area exc 13.00 Sqcm but n.exc 25.00 Sqcm. complete all as specified and directed.

M&L 20 mm thick IInd class hard wood (Sal) boarding planed one side with butt joints and fixed with fixed with nails as in roofs , ceiling partition fasica , barge soffits etc (except flooring and skirting) , complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering/cladding to wall, fixed with self tapping screws and washers of 68 mm fine thread for MS Pipe purlin and double threaded for wooden purlins as per sutaible distance as guided by AGE/ GE and finally complete all as Specified & directed by GE/Eng-in-Charge.Make - Tata Durashine , JSW steel India or equivalent in Roffit( Shiv Shakti Fibre Udyog)

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ- 150) as in ridges, hips, valleys/rain water / roof covering/cladding to wall, fixed with self tapping screws and washers of 68 mm fine thread for MS Pipe purlin and double threaded for wooden purlins as per sutaible distance as guided by AGE/ GE and finally complete all as Specified & directed by GE/Eng-in-Charge.Make - Tata Durashine , JSW steel India or equivalent in Roffit( Shiv Shakti Fibre Udyog) )

S&F in repairs PVC Panneling with PVC panels of 9mm thick and 250mm wide interlocked type incl angle or channels and necessary fitting as rawl plugs,screws,adhesive etc including taking down of internal light fittings and refixing of same where reqd complete all as spd & directed by GE/Eng-in-Chargeall as spd.& directd.by GE/ Engr-in -charge.

S&F in repairs false ceiling with fully perforated 10mm thick square edged GRG False ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) flase ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC 0.5 to 0.75 as per IS 8225 : 1987, Nomocombustible as per BS 476 (part -4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 gm per sqm including both sides) comprising of main T runners of size 15 x 32mm of length 3000mm, cross T of size 15x32 mm length 1200mm and secondary intermidiate crossT of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 gm per sqm) i.e 50mm long. 8mm outer diameter M-6 M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-Shape level adjuster size 85 x 25 x 2 mm. Galvanized iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per directions of the Engr -in-Charge. Make : Diamond Ceiling, Gypcore, Maruti, Shera

S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and making good all the disturbed portion and refixing of disturbed internal light fittings complete all as spd & directed by GE/Eng-in-Charge.

PIONEER REFRIGERATION AND ELECTRICALS

M/s Candid Mask Networks Pvt Ltd

chaprana enterprises

V R Associates

Shikha Enterprises

KANISHKA ENTERPRISES