IMPROVEMENT TO CERTAIN OMQS AND SMQS OF DARJIPURA AT AF STN VADODARA

Amount

Taking down chowkats or frame with shutters (without taking off shutter from the frame) exc 1.5 Sqm and n exc 4.0 Sqm each complete all as speified and as directed.

Taking down chowkats or frame with shutters (without taking off shutter from the frame) n exc 1.5 Sqm each all as speified and as directed.

Taking down shutter only of any description exc 1 Sqm n.exc 2 .0 Sqm and removing all as speified and as directed.

Taking down shutter only of any description n exc 1Sqm and removing all as speified and as directed.

M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

M&L Factory made flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications and drawings complete all as specified and directed.

M&L Factory made flush shutters 18-19 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter complete all as specified and as directed..

S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S&F 150mm long aluminium handle cast type anodized complete all as specified and directed.

S&F 100mm long aluminium handle cast type anodized complete all as specified and directed.

S&F Hasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed.

S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked) complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,plaster work on edges during fixing (if required)etc all complete as per architectural drawings and as directed at site.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for Pressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework or water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) for cooler stand and similar work conforming to Fe 410-W Gde-E-250 quality-A complete all as specified and directed.

M&L Preparation of new steel surfaces over 10 CM width or girth and applying with two coats of synthetic enamel over and including one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing 75 mm thick plain cement concrete as in plinth protection 1:3:6 Mix, Type C1 (using 20mm graded stone aggregate) finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for providing 50 mm thick plain cement concrete 1:2:4 Mix, Type B1 (using 20 mm graded graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for providing 75 mm thick plain cement concrete 1:4:8 Mix, Type D2 (using 40 mm graded graded stone aggregate) as in sub bases of floor and pavings complete all as specified and directed.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, as in vertical surfaces such as skirting/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of wall complete all as specified and directed.

Demolition of stone slabs and tiles of any description of any thickness, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Machine cut Pre polished kota stone slab flooring 20-25 mm thick over and including 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase and Kitchen platform etc. complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore size, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections of 20 mm bore size, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm dia GI water tubing ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore GI water tubing medium grade in any length including provision of new fittings fixed to wall or laid in floor complete all as specified and directed.

S&F 20mm dia GI water tubing ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 20mm bore GI water tubing medium grade in any length including provision of new fittings fixed to wall or laid in floor complete all as specified and directed.

Dismantling water tanks of any description exc 200 ltr & n exc 500ltr capacity and removing to store complete all as specified and directed.

S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all as specified and directed .

Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density 32 mm dia complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Bib taps, cast copper ally, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified and directed.

S&F wall mixer, brass CP, 3 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand and overhead shower) (Concealed type) screw both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union to15mm bore pipe complete all as specified and directed.

S&Fin repairs 32/40mm PVC waste pipe for wash hand basin & kitchen sink, 600mm long complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F Tubular Towel Rail, 20 mm dia and 600mm long between flanges, Brass Chromium Plated and fixed complete all as specified and directed.

S&F Soap dish, stainless steel body, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for Treatment to sunken portion including demolition of existing tiles and PCC of sunken floor and provn of 40mm thick PCC 1:2:4 type B1 as top layer and 10mm thick plaster in CM 1:4 with WPC Liquid complas 421 in bottom and sides of sunken potion and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering with 10 thick plaster in CM 1:4 mixed with complas 421 in sunken portion of WC as in second layer including jointing of CI pipe joint , provn of GI spout with 40mm dia pipe up to 30cm with water tight joint from the external surface of wall and filled with PCC 1:5:10 type E2 as lean concrete up to the required level complete all as specified and directed.

Demolition and breaking up drain pipes (CI drain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), and taking out of trenches, if required complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floor complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single Y, equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single Y equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) couplers complete all as specified and directed.

S&F 75mm bore PVC (SWR) couplers complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless Steel plate rack, made out of 1mm thick sheet, of Size 31"x36"x10" fixed in position with screws complete all as specified and directed.

S&F 25 mm dia curtain Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. fixed complete as in repairs all as specified and directed

Taking down cement plaster of any description from brick or stone wall/ celling including raking out joint, haking for key and scrubing down with water etc. complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed.

M&L for Preparation of new surfaces of wall of any description and applying two coats of oil bound distemper over application of chalk whitening complete all as specified as directed

M&L for Preaparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed

M&L for Complete removal of existing treatment of plastered or unplastered surfaces of wall and applying two coats of exterior acrylic emulsion over a coat of primer incl preparation of surface complete all as specified and directed.

M&L Complete removal of existing treatment of plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over application of chalk whitening complete all as specified directed

M&L for Complete removal of existing treatment of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Preparation of old surfaces of wall/ ceiling and applying 1-1.5 mm thick wall care putty finished complete all as specified and directed.

M&L Filling surface cracks not exc 5 mm to 7 mm wide with "Dr Fixit" cracks X power or equivalent polymer mollified cracks filler all as per manufacturer instructions and as directed.

Removing of existing unserviceable water proofing treatment taking down cement plaster etc. of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and directed.

M&L for Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3 Kg/Sqm in weight with non-woven polyester reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacture instruction and all as per particular specification including application of solar reflective aluminium paint all as specified and directed. Note:- (a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receive the primer and all as directed by the Engr-in-Charge. (b) Necessary guarantee certificate shall be given by the manufactures for the material for 10 years from the date of completion of work. (c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on vertical position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions. (d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment. (f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider. (g) Contractor shall produce the certificate from the manufacturerer for the authorised applicator before commencement of work.

M&L for 10mm thick plastring in CM 1:4 mixed with WPT 3% by weight of cement finished even and smooth with out using extra cement on roof surfaces for laying WPT complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L for PCC 1:2:4 Type B-0 using 12.5mm graded aggregate laid to slope 1:30 as in padding for WPT over roof slab, filling of pressed steel door frame complete all as specified and directed.

M&L for PCC 1:2:4 Type B-0 using 12.5mm graded aggregate as in cover fillet of 75 mm radius at junction of roof slab and parapet wall etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm dia brass CP two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point controlled by one, one way switch 06 Amps.

All as per srl item No 104.00 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per srl item No 104.00 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per srl item No 104.00 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per srl item No 104.00 here-in-before but one 3 pin, 06 Amps bell point controlled by one, one way 06 Amps switch.

All as per Serial Item No 104.00 above but point wiring with 2.5 Sqmm single core FRLSH cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fixing modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fixing modular bell push with indicator, 06 Amps, single pole, one way, 250 volts, complete all as specified & directed

Supply and fixing modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed

Supply and fixing modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed

Supply and fixing modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed

Supply and fixing ding dong bell, AC, 230 volts, single pole complete all as specified & directed

Supply and fixing ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, hum free, AC, 230 volts, 100 watts, duly ISI marked complete all as specified & directed

Removing of existing ceiling fan from site and depositing the fan at store and refixing the same at site including servicing, greasing, oiling & painting complete all as specified & directed.

Removing of existing Exhaust fan from site and depositing the fan at store and refixing the same at site complete all as specified & directed.

Removing of existing Electric geyser from site and depositing the geyser at store and refixing the same at site complete all as specified & directed.

Supply and fixing wall globe prismatic fitting including 9W LED bulb (Make of Bulb : Syska/Havells/Philips) complete all as specified & directed. Make : Cat No SZWWGBL009-B 22 of Shakti or as per makes in Appx B of tender documents.

Supply and Fixing in repair 10W LED T5 TL fitting (300mm) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down of exsting u/s tube light fitting and supply and fixing on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat shrink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed

Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing, including taking down old sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing MCB, DP, AC, 240 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and install, testing and commissioning meter box of size 950mm(L) x950(W)x 200(D)mm suitable to install 6 nos single phase electronic meter in separate compartment made out of 2 mm thick CRCA sheet duly powder coated, including 200 Amps rating 4 nos copper bus bar chamber, including power wiring with using PVC insulated stranded copper wire of size 10 sqmm duly provided lugs from busbar to meter and meter to control MCB with provisioning transparent glass in front of meter complete rubber gasket , locking and sealing arrangement including following MCCB/MCB (a). Incomer MCCB 4 pole 160 Amps 25 KA - 01 Nos (b). Outgoing MCB SPN 63 Amps - 06 Nos (c). Outgoing MCB SPN 20 Amps - 01 Nos (d). Indicating Lamp RYB - 1 Set (e). Housing with 6 nos electronic meter 10-60 Amps rating single phase 240 Volt.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.

ASC CONSTRUCTION (BID ID -3388233)

ABP CONSTRUCTION (BID ID -3388356)

M/S AMOL BAPUSAHEB MOTE (BID ID -3388140)

M/s Shree Ram and Sons (BID ID -3388452)

M/s Sati Jasnath Enterprises (BID ID -3388458)