SPECIAL REPAIRTO PCC PATH AND INTERLOCKING TILES FOR SRC, PRC AND ASC AND SPL REPAIR TO ROAD ALONG THE BOUNDARY WALL AT RAMGARH CANTT

Amount

Demolition of cement concrete in ground floors and paving not exc. 15 cm thickness above or below ground level , complete all as directed.

Removing demolised materials to a distance exc 500m but not exc 1.00 KM including loading, unloding and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as directed.

Cement Concrete (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in road/pavements , path, hard standing etc including necessary mild steel channels form work complete all as directed.

Finishing concrete surface of roads, pavement, hard standing by brooming complete all as directed

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A thickness of concrete slab 125 mm complete all as directed

Forming contraction (dummy) joints of 65 mm x 10mm wide primed & filled with sealing compound Gade 'A' complete all as specified and directed by Engr-in-Charge.

Forming contraction joints of 30 mm x 10mm wide primed & filled with sealing compound Gade 'A' complete all as directed.

100mm thick cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, path, roads etc complete all as directed.

Sand filling under floors or in foundations including watering and consolidation complete all as directed.

Machine pressed precast concrete interlocking paver block with gray cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as directed

Cement concrete (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stopes rounded or chamfered on edges etc complete all as directed.

Repair to pot holes any depth, n.exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road path etc cutting around edge to at least 25 mm in depth, making good by filling in screened & graded road metal, watering, well ramming, compacted and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as directed.

Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-30 with 4% binder content by weight of total mix with 8 to 10 tonnes power roller complete all as directed.

Preparation of existing black top surfaces by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and applying a priming coat of bitumen primer @5 kg/10 sqm of VG-10 grade bitumen complete all as directed.

Bituminous premix aphaltic semi-dense concrete 40mm thick consolidated thickness with 5.5% binder content(VG 30) by weight of total mix, mixed in hot mix plant, rolled with tandem vibratory roller and compacted to required camber and gradient by using mechanical paver complete all as directed.

Road marking paint with hot applied thermoplastic paint 2mm thick having clear and sharp edges over road surfaces including straighting portion, curve etc in any situation. The therrmoplastic material shall be homogeneously composed of aggregate pigment resin and glass reflector rising beads in equal percentage as specified. The work include for cleaning of road surface, heating the paints within temperature limits as specified by the manufacturer making proper arrangement for traffic during operation etc conforming to specification complete all as directed.

Cement Concrete nominal Mix PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in road,pavements,ramps, coping,etc finished even and fair without using extra cement complete all as directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves and platform etc complete all as directed

Providing Precast cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) for drain Covers,etc complete all as directed

TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as directed.

M/S ROHIT CONSTUCTION

M/s Ray construction

M/S Manoj Kumar Sinha

M/S SHAMBHU SHARAN SINGH

upadhyay engineers and consultant