Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹33.8 L+₹1.1 L (3.27%)Rejected-AOC G 16 JAY COMPLEX BELOW UMA CO OP BANK NIZAMPURA VADODARA 390 002 | VADODARA | VADODARA | GUJARAT | 390002 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹34.8 L+₹2.1 L (6.40%)Rejected-AOC 4 A RUKSHMANI PARK SOCIETY OPP SAMA WATER TANK NEW SAMA ROAD VADODARA 390 008 | VADODARA | VADODARA | GUJARAT | 390008 | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹36.9 L+₹4.1 L (12.7%)Rejected-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L4 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹68,240
Closing Date
15 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2023_MES_631987_2
8767
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARODA
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE ARMY BARODA
₹68,240
Yes
8 Mar 2024
18 Jan 2024
20 Feb 2024
18 Jan 2024
15 Feb 2024
2 Feb 2024
19 Jan 2024 - 1 Feb 2024
Amount
Surface excavation n. exc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil
Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point.
M&L for hard core of broken stone or boulders of gauge not exc 63 mm, deposited, spread and leveled,watered complete all as specified and directed.
M & L for rolling and consolidation of hardcore of broken boulders or quarried stone, not exc 15cm thickness with 8 to 10 tonne power roller to a true surface etc complete all as specified and directed.
M & L for 150 mm thick plain cement concrete(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified & directed.
M & L for mild steel TMT bar 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia, or securing with clips complete all as specified and directed.
M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less.
M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating including use & waste of form work complete all as specified and directed.
M & L for Spike rolling to surfaces or making impressions of expanded metal, while the concrete is green
M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed
M&L 100 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in flooring in patches , finishing surface even and smooth without using extra cement complete all as specified and as directed.
M&L for forming 20mm wide expansion joint filled with pre-formed compressible synthetic filler board, applying bond breaker tape on top of filler board HD 100 for complete width of joint, provision of closed cell polyethelene back up rod 28mm to 30mm dia filled with polysulphate or polyurethane based sealant (minimum depth of sealent above backup rod shall be 20mm), priming the side and applying masking tape on edges of joint to prevent accidental spiliage of sealent and removing the masking tape after sealant is applied, for thickness of concrete slab complete all as specified and as directed. The sealant shall confirm to IS-5818 and MAV of + 30% with 10 years warranty for:-
Thickness of concrete slab 100 mm
Thickness of concrete slab 150 mm
Forming contraction/dummy joints 70 mm deep and 10 mm wide (using diamond cutter) and top 13 mm (minimum above back up rod) filled with polyurethane sealant priming the sides with two coats of primer provision of closed cell polyetheleneback rod 8mm dia and applying masking tape on edges of joint to prevent accidental spiliage of sealent on top surface and to give a neat finished to the sealant and removing the masking tape after sealant is applied complete all as specified and as directed. The sealant shall confirm to IS-5818 and MAV of + 30% with 10 years warranty.
Finishing surface of concrete roads, pavemets, by brooming complete all as specified.
Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
City Light
Gayatri Associates
M/S Badri Electicals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .