REPAIRS REPLACEMENT OF INTERNAL WIRING LIGHT FITTINGS FIXTURES AND CONNECTED ITEMS AT MES COLONY FILTERATION PLANT AT INF LINES AND BG LINE AREA AT MIL STN JAMNAGAR

Amount

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed surfaces of walls floors etc all as directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, terminal boxes closed recossed type. PVC Plastic board all as required as specified and directed for the following :- (Make : Havells/Finolex/Polycab)

(a) One light/ Fan point controlled by one way switch.

(b) One Bell point controlled by one switch bell push

(c) One light point controlled by two - 2 way switches for stair case.

(d ) One 5 Amps switch socket combination on independent board.

(e) One 5 Amps socket on same board with other switches.

All as per item No-2 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F in repairs switch piano flush type single pole one way 5 Amps 230 V.

S&F in repairs switch piano flush type single pole two way 5 Amps 230 V,.

S&F in repairs switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose,

All as per item No-6 above but 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.) .

S&F in repairs socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type.

S&F in repairs fan regulator Electronic Step type 2module, 100/120W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc., complete all as specified and directed by Engineer-in-Charge.

S & F switch Bell Push button type 5 Amps single pole one way.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall(Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes & cover plate with frame of white colour of suitable size as required at site; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete including replastering and making good the surface of wall and painting with existing colour all as specified and directed at site for the following :

One light/ Fan point controlled by one way switch.

One Bell point controlled by one switch bell push

One 5 Amps socket on same board with other switches.

One 5 Amps socket on independent board.

All as per item No-11 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F in repairs modular switch piano flush type single pole one way 6/10 Amps,1 module

S&F in repairs modular socket 6/10 Amps -2/3 pin combined 2 module,

S&F in repairs modular switch piano flush type single pole one way 16/20 Amps,1 module

S&Fin repairs Modular socket 6/16 Amps 2/3 Pin combined 2 module

S & F in repairs Modular switch Bell Push 6/10 Amps single pole one way. Make-Anchor/havells/bajaj.

S&F in repair Bell Ding Dong AC 230 volts type single pole as directed,

S&F in repairs modular fan regulator Step type 120W 2module complete all as specified and directed.

S&F in repairs lamp holder insulated body with back plate for batten fittings.

Supply & Fixing in repairs LED Batten fittings 5 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model: Wipro Garnet 5W , D560565 of Wipro,or Bajaj BCLSB 05 WH or evqt in Jaguar

Supply & Fixing in repairs LED Batten fittings 10 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 10W , D561065 of Wipro or Bajaj BCLSB 10 WH or evqt in Jaguar

Supply & Fixing in repairs LED Batten fittings 20 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 20W , D562065 of Wipro or Bajaj BCLSB 20 WH or evqt in Jaguar

S&F in repairs ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified.

S&F in repair, DB sheet metal enclosure 4 way Single door SPN. Make:Indoasian /Havells/C&S

All as per item No-29 above but 8 way Double door SPN. Make:Indoasian /Havells/c&s

All as per item No-29 above but 12 way Double door SPN. Make:Indoasian /Havells/C&S

S&F in repair MCB SPN 10 to 40 Amps all as specified and rupturing capacity 10 KA, Make:Indoasian /Havells/C&S

S&F in repair MCB single pole 5 to 16 Amps all as specified and rupturing capacity 10 KA,Make:Indoasian /Havells/C&S

S&F in repair, DB sheet metal enclosure 4 way TPN Double door IP 43 for mounting MCB.Make:Indoasian /Havells/C&S

Supply and Fix in repairs, for MCB TPN, 4 pole 40 Amps 415 Volts all as specified and repturing capacity 10 KA.complete.Make:Indoasian /Havells/C&S

Supply and Fix in repairs, for MCB TPN, 4 pole 63 Amps 415 Volts all as specified and repturing capacity 10 KA.complete.Make:Indoasian /Havells/C&S

M&L for sub main wiring with two runs of 2.5 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit & accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 2.5 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unsheathed cables and one run of earth continuity conductor incl conduit will be measured and paid as one unit length only.

M&L for sub main wiring with two runs of 4.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit & accessories fixed an surface of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unsheathed cables and one run of earth continuity conductor incl conduit will be measured and paid as one unit length only. Make: Havells/Finolex/Polycab

M&L for sub main wiring with two runs of 6.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit & accessories fixed an surface of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unsheathed cables and one run of earth continuity conductor incl conduit will be measured and paid as one unit length only. Make:Havells/Finolex/Polycab

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe (light grade) and watering pipe 20mm bore GI pipe(light grade) and PCC Pit (1:3:6) type C1 using 20mm graded stone aggregate with RCC cover including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire of same size upto 7.5m shall deemed to be included into quoted rate

S & F Sheet metal enclosures with socket plug top with 20 Amps MCB SP enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 amp of 240 volts.

S&F recess mounting LED panel 15 W 3000Kluminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover including 2.5 KV surge protector.

S&F in repairs LED security light of 30 to 35 Watt with min lumen output 3000lmn, in die cast housing, powder coated with grey colour finish IP 66 prismatic polycarbonate cover with LED Lenses and making electrical connections with 2.5sqmm 2core Al service wire complete all as specified and directed by Engr In Charge.Make: D923065 of Wipro or eqvt in havells, Bajaj

S& F in repairs Street light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required at site including M S Clamp made out of flat iron 50 X 5mm with necessary nuts Bolts etc all as specified suitable for all fitting and directed by EIC.

S&F in repairs PVC Plastic switch board of size 8"x10" including shifting of switch,sockets,regulator etc complete as directed by EIC

S&F in repairs PVC Plastic switch board of size 6"x8" including shifting of accessories switch,sockets,regulator etc complete as specified and directed by EIC

S&F in repairs PVC Plastic switch board of size 7"x4" including shifting of accessories switch,sockets,regulator etc complete as specified and directed by EIC

S&F in repairs PVC Plastic switch board of size 4"x4" including shifting of accessories switch,sockets,regulator etc complete as directed by EIC

S&F in repairs PVC insulated unarmoured Aluminium service cable 4sqmm 2core ISI marked . Make: Finolex/polycab/ Havells

S&F in repairs PVC insulated unarmoured Aluminium service cable 6sqmm 2core ISI marked . Make: Finolex/polycab/ Havells

S&F in repairs LED Bollard 9Watt in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection all as specified and directed by Engr in charge.Make: Bajaj Cat No. BGBOS 600 9W LED or eqvt in wipro/philips

Hirachand Sunderji and co

JAYESH TRADING CORPORATION

M/s.Bhavin Electricals

M/S PRASHANT BENIWAL