WATER SUPPLY SCHEME BHAGAT MOHALLA UNDER JAL JEEVAN MISSION

Amount

Tube Well (Discharge 3500 GPH) at Bhagat Mohalla Smailpur Deep drilling of Tube well by direct rotary/dual rotary method with safe discharge not less than 3500 GPH along with clearance of site by way of bush cutting, making approach road, shifting of machinery, tools and tackle all material, prepration of site, proper drilling of gravel packed bore 530 mm dia for lowering of linear assembly and staner pipes of 300/250 mm dia 8mm thickness in all types of strata and conditions upto required depth (minimum 250 mtr or technically feasable depth) for acquiring desired discharge including cost of blind pipe & stainer, development of tube well by air compressor of adequate capacity and stabilization and testing of tube well by way of VT/submerssible pump set as per IS code Part -1 2800 of 1992 & IS -800 Part II of 1979 with upto date ammendments to give clear potable water having discharge as per specifications is yielded including cost of ERW MS casing Pipes 300/250 mm dia 8mm thick, slotting of ERW MS Casing pipes 300/250 mm dia 8mm thick, fabrication,providing and fitting of steel supporting clamps.at proposed tube well site Bhagat Moh Smailpur (Turn Key Basis)

Mechanical Works: Proposed T/well Bhagat Moh Smailpur : Providing, installation, testing and commissioning of Submersible pump sets of 3500 GPH x 125 mtrs. head (01 No. working + 01 No. standby) along with allied electro-mechanical works at proposed T/well No. Gurah nallah. Design, fabrication, insallaiton, testing & commissioning of fully automatic LT control panel for submersible pump along with allied works.Providing, fitting, installation and testing of manual 5 ton capacity chain block for extraction & lowering of submersible pumpset. Providing , installation, testing and commissioning of 63 KVA Voltage stablizer along with allied works at tube well station Bhagat Moh including earthing. Tubewell CRPF Smailpur : Providing, installation, testing and commissioning of standby Submersible pump set of 4000 GPH x 100 mtrs. head along with allied electro-mechanical works and preventive devices. Providing, fitting, installation and testing of manual 5 ton capacity chain block for extraction & lowering of submersible pumpset. Tubewell Christain Mohalla :Providing, installation, testing and commissioning of standby Submersible pump set of 4000 GPH x 100 mtrs. head along with allied electro-mechanical works and preventive devices. Providing, fitting, installation and testing of manual 5 ton capacity chain block for extraction & lowering of submersible pumpset. Providing , installation, testing and commissioning of 63 KVA Voltage stablizer along with allied works including earthing. Existing tube well Smailpur (Old): Providing, installation, testing and commissioning of standby HC pumpsets 5000 GPH x 150 mtrs. head along with other allied works. Design, fabrication, installation, testing & commissioning of LT Control Panels for HC pumpset along with automation and other allied works.

Electrical work at tube well station Bhagat Moh Smailpur Creation of 100 KVA electric sub station complete including Laying of H.Tand L.T line on steel tubular poles, with weasel conductor, earthing complete, L A Set, DOF set, link set, LT cables including connection with H.T line complete job.

Civil Works: Construction of 1 No. Pump Room building near tube well under water supply scheme Bhagat Moh. (Items Rate) Earth work in bulk excavation by means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Dumping and supply of stone in Horizontal on level

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1 cement: 1½ Coarse sand : 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x40x6mm for diagonal braces

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel promer all complete. Fixed to steel windows by welding

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a primer coat using structural steel etc. as required in grantings, frames, guard bars, ladders railings , gates and similar works

Steel work in single section fixed with or without connecting plate including cutting hoisting and placing in position and priming coat of approved steel primer all complete

Cement plaster (in coarse sand) 15mm Cement plaster of mix: 1:6 (1 cement: 6 coarse sand)

12mm thick Cement plaster of mix : 1:4 ( 1 cement : 4 coarse sand) Ceilings and projections

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 40mm thick with 20mm nominal size stone aggregate

10cm thick (average) mud phaska of damped brick eartjh on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of eatrth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finishing neat. With machine moulded Common burnt clay (Non modular) brick tiles of class designatgion 10.0

Providing gola 75x75 mm in cement concrete 1:2"4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.

White washing with lime to give an even shade

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making of khuras 45x45cm with average minimum thickness of 5 cm cement conc. 1:2:4 over PVC sheet 1mx1mx400 micron finished with 12mm thick cement plaster 1:3 (1cement 3 coarse sand) and coat of neat cement rounding of edges and making of finishing the out let complete

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers

Providing and fixing on wall for unplastcised rigid PVC rain water pipes including jointing with seal ring 75mm dia.

Carriage of Sand by Mechanical Transport from source to site of work for an av. distance of 12 km and 100 mtr by head load.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Carriage of soling stone/ boulders by Mechanical Transport from source to site of work for an av. distance of 8 km.and 100 mtr by head load.

Carriage of Brick from klin to site of work by M.T 12 km and 100 mtr by head load.

Carriage of Brick tiles from klin to site of work by M.T 12 km and 100 mtr by head load.

Provision of Electric fitting inculding under ground conduit pipes, wiring , steel boxes and switches for 2 No light points(internal) with holder and Led bulbs and external 2 Nos with halogen/Led lights (external grade) including main line (Complete Job).(Turn Key basis)

Construction of 1 No 20000 Gallons Sump Tank at Bhagat Mohalla (Items Rate) Earth work in bulk excavation by means over areas (Exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth lead upto 50 mtr and lift upto 1.5 mtr as directed by Engineer in Charge. In all kinds of soil.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works upto plinth level (Bed Slab+ Gola)

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works above plinth level upto floor level V (Walling, beams)

Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½: 3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for shuttering in circular work (20% of respective centering and shuttering)

Centring and shuttering including strutting, propping etc. and removal of form for: Arches, domes, vaults upto 6 mtrs span.

12mm plaster finished with a floating coat of neat cement of mix: 1:3 (1 cement : 3 coarse sand)

12mm cement plaster of mix :1:4 (1cement: 4 coarse sand)

Extra for plastering on circular work not exceeding 6m in radius: In one coat

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Providing and fixing AC plain, bends 80mm dia

Providing and fixing of G.I pipe of 80mm dia GI pipe in trenches including cost of pipe and filling

Providing and fixing of G.I bend of 100mm dia including welding of plates

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Steel work welded in built up sections for manhole cover,ladders railings ete

Carriage of Sand by Mechanical Transport from source to site of work for an av. distance of 12 km and 100 mtr by head load.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Construction of Compound walls around Tube well site (Items Rate) E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as directed. (All kind of soil)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Dumping and supply of stone in Horizontal on level

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonary with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

15mm thick Cement plaster or rough side of single or half brick wall of mix : 1:4 ( 1 cement : 4 coarse sand) wall with plinth

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Carriage of Sand by Mechanical Transport from source to site of work for an av. distance of 12 km and 100 mtr by head load.

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 12 km and 100 mtr by head load.

Carriage of soling stone/ boulders by Mechanical Transport from source to site of work for an av. distance of 8 km.and 100 mtr by head load.

Carriage of Brick from klin to site of work by M.T 12 km and 100 mtr by head load.

Steel work welded in built up sections for ladders railings,gates etc using structural steel including cutting/hoisting fixing in position including priming coat.

Writing on walls for different components of Water supply scheme and Fabrication, erection, painting and writing of Sign board (turn key basis)

Pipe Works: Providing , Laying and fitting of Rising main and Distribution system. Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lit upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Refilling of excavated earth 90% of excavated earth

Providing, Laying & fitting of G.I pipes( of any make as per Bureau of Indian Standard) for Rising main and Distribution system including clearance of site, providing & fixing of all required fittings / specials/ Gate Valves/Sluivce Valves/ Check Valves (ISI marked branded make along with allied accessories, construction of required valve pits/mainfolds, making connections & interconnections wherever required, .carriages of all sorts complete with testing & commissioning (complete Job/rm).

Providing and laying of distribution system at Bhagat Moh. GI pipe 80mm dia (Medium)

G.I pipe 80mm dia (Light)

GI pipe 65mm dia

GI pipe 50mm dia

GI pipe 40mm dia

GI pipe 25mm dia

GI pipe 20mm dia

Provision for fabrication of joints by way of welding for Rising mains and distribution system (complete job) (Turn key basis)

Dismanttling tile work in floors laid in cement mortor including stacking material within 50mtrs and relaying of tile after laying of pipe as per instructions of site engineer (Complete Job)

Dismanttling of Bitumen course by mech/manually means and disposal of dismanttled material upto lead of 50 mtr and laying of B.T surface with 25mm thick top layer after laying of pipe as per instructions of site engineer (Complete Job)

Providing of functional house hold connections including providing of G.I pipes, fittings etc. (Complete job)