Annamanada GP 2024-25 Mini MCF at Panchayath office and constituent offices-Prj No 131/25

Amount

Mini MCF at panchayath office and constituent office

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD248047/2024-2025:Providing and fixing precolated galvanised iron profile sheet (size,shape,and pitch of corrugation as approved by Engineer in charge )0.35mm(+0.05%) total coated thickness with zinc coating 120grams per sqmas per IS 277 in 240mpasteel grade 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.The sheet should have a protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer in charge .The sheet shall be fixed using self drilling self tapping screws of size (5.5x55mm)with EPDM seal,complete upto any pitch in horizontal /vertical or curved surfaces,excluding the cost of purlins raftersand trussesd and including cuttingti size and shape wherever required(Modified data 51.20)

OD250534/2024-2025:Plain G I ridge capping 225 mm flaps with 0.35mm thick /nearest available size SS screws including plain washers plain washers and bitumen washers etc. complete.

10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

16.15.2:Supplying at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & painting to be paid for separately)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD249009/2024-2025:Lettering with Synthetic enamel paint of approved brand and manufacture

OD248995/2024-2025:supplying and fixing Name board at site as per the direction of departmental officers at site.

Sali K P (BID ID -1998895)

Bidder Name

Sali K P

K P SANU